L-shaped (Hex)

Since the ball point can be rotated diagonally, it is easy to tighten and loosen screws in narrow and deep places. * Do not use for anything other than its intended purpose.

A tool for tightening and loosening hexagon socket head cap screws. * Do not use for anything other than turning the screw. * Use a hexagon wrench that matches the screw holes. * Do not use a deformed wrench once. * A thin wrench may break with the force of your hand, and excessive use is dangero... Read More

You can easily distinguish the size by color. It is easy to find in the tool box. Can be fast-turned and fully tightened. Comes with a holder that is convenient to carry and store. For attaching and detaching hexagon socket head cap screws * Do not use for any purpose other than its intended purp... Read More

* Do not use for anything other than its intended purpose.

* Do not use for anything other than its intended purpose.

Ideal for assembly and maintenance work.

Since the neck to tip are significantly shortened, it is ideal for narrow spaces! One side is finished with opposite side bending and the other side is finished with diagonal bending, so it can be used with a tightening (rotation) angle of 30 °! Ideal for work in tight or crowded areas

Uses high torque and tough nickel chrome molybdenum steel. The holder can be rotated, making it easy to put in and take out wrenches of each size.

The material is super strong alloy steel. Spring steel and steel balls are embedded in the ball point part of the head (3.0 mm to 10.0 mm). Since the bolt is firmly held from the inside, it is convenient for screw tightening work in deep places. In addition, by making the ball point part a new st... Read More

A long type that is ideal for deep places. Uses EX hard metal that is resistant to twisting and breaking. The maximum tilt angle is 38 ° (design value). When the wrench is tilted, the driving position moves near the entrance of the hexagonal hole, so even if the neck is thick, the tilt angle can ... Read More

By processing the tip of the ball point, the work of hexagon bolts and screws has been reborn. You can easily catch the screw holes and turn the screws continuously from an angle. The metal part body is fully hardened.

Short type under the neck that is easy to enter in narrow places * Be careful not to apply too much torque.

A set of 10 millimeter-sized and 10-inch hex-sized hex wrenches in a newly developed compact tool case that can be opened and closed 360 °.

The material is Protenium [[R top]] alloy steel with tensile strength. Proguard [[TM]] Processing: Has 5 times the corrosion resistance of normal black dyeing processing. It can be screwed from an angle of up to 25 degrees. Comes in a reusable patent holder. The hardness is HRC57-61. Ideal for wo... Read More

The PB Rainbow Wrench makes it possible to identify the dimensions used at a glance by each color. In addition, it has rust resistance due to the special powder coat. The edges are lightly trimmed so you can easily insert a wrench into the screw holes. The wrench is marked with a 5-digit producti... Read More

With holder. With package.

The hexagonal tip has a large contact surface so that it fits perfectly into the hexagonal hole of the bolt, resulting in less wear and less settling.

* Do not use for anything other than its intended purpose.

For tightening and removing bolts with holes, etc.

Temporary tightening and quick rotation of diagonal work are possible with ball point processing. * Because the ball point has a low limit torque, be careful not to apply too much force. Apply force in the direction of rotation of the bolt. If you pull it up or push it down, it may be damaged fro... Read More

The holder can be rotated, making it easy to put in and take out hexagonal wrench of each size. The surface treatment is black dyeing. The hardness is HRC52-56.

A bargain inch-sized hex wrench set. Comes with a holder that is convenient to carry and store. * Do not use for anything other than its intended purpose.

A long type that is easy to apply force.

It is convenient for attaching and detaching hexagon socket head cap screws that are attached to deep places. Diagonal rotation work is possible. * Because the ball point has a low limit torque, be careful not to apply too much force. * Apply force in the direction of bolt rotation. If you pull i... Read More

You can easily distinguish the size by color. It can be tilted by ball point processing for quick rotation and temporary tightening. Comes with a holder that is convenient to carry and store. For attaching and detaching hexagon socket head cap screws * Do not use for any other purpose. * Because ... Read More

Eight is the only manufacturer specializing in high-end hex wrench in Japan. All products are manufactured in factories with a quality assurance system under strict quality control.

Temporary tightening and quick rotation of diagonal work are possible with ball point processing. * Because the ball point has a low limit torque, be careful not to apply too much force. Apply force in the direction of rotation of the bolt. If you pull it up or push it down, it may be damaged fro... Read More

Temporary tightening and quick rotation of diagonal work are possible with ball point processing. For tightening and loosening hexagon socket head cap screws and hexagon socket set screws * Do not use for any other purpose. * Because the ball point has a low limit torque, be careful not to apply ... Read More

Uses special alloy steel that enhances high torque, durability, and wear resistance. Advanced heat treatment and hard chrome plating prevent wear on the hexagonal part, increase toughness (hard to break) while maintaining high strength, and ensure reliable work. And ensured safety. With ball poin... Read More

The neck short type is ideal for use in narrow spaces and deep places. It can be tilted by ball point processing for quick rotation and temporary tightening. Comes with a holder that is convenient to carry and store. * Do not use for anything other than its intended purpose.

Convenient for attaching and detaching hexagon socket head cap screws installed in deep places. Diagonal rotation work is possible * Because the ball point has a low limit torque, be careful not to apply too much force. * The swing angle of the ball point varies depending on the size and the vari... Read More

The material is chrome vanadium steel (Cr-V). The hardness is HRC50-58.

It is possible to turn an angled screw with a precisely made ball point (OK up to an angle of 30 °) * The ball cannot be fully tightened.

* Apply force in the direction of bolt rotation. If you pull it up or push it down, it may be damaged from the bent part.