Truck Supplies & Parts

Since it uses 16 high-brightness LEDs, it can illuminate quite brightly. It can be used as a truck bed or as lighting for night work. For lighting truck beds and night work * Please check the main body for cracks and cracks before use. If the board is used with cracks or cracks, the board may be ... Read More

It is a high quality product made in Japan. Stop / tail, cornering, turn signal lamp * Do not use for anything other than its intended purpose.

A mudguard for trucks. Prevents pebbles and mud from splashing up when driving in the rain. For truck mudguards * Please note that the glossy surface will inevitably be scratched during packaging. * Please note that cracks and cracks may occur due to the characteristics of the material in cold re... Read More

Since it uses a high-brightness LED, it can illuminate quite brightly. It can be used as a truck bed or as lighting for night work. For both 12V / 24V. White emission. Lighting for trucks, car carriers, etc. * Do not use for any other purpose. * Noise may be generated by using this product, which... Read More

Ultra bright LED. The special lens structure illuminates the road surface brightly with vivid diffused light emission. Uses a lens that has passed the light resistance test and is resistant to discoloration. Dustproof and waterproof IP67 acquired! Noise countermeasures have been taken! Supports 2... Read More

Handle cover for trucks. Since it is a glossy vinyl fabric, it is not slippery and it is easy to remove dirt. Handle cover for trucks, to prevent the handle from getting dirty * Do not use for any other purpose.

A general-purpose floor mat on the driver's side for trucks. Interior parts * This product is general-purpose, but depending on the model, the handle post may be thicker than the notch of this product and may not fit. Please note.

A nubuck-like handle cover that fits comfortably in your hand. Interior parts * Some vehicles have different steering wheel outer diameters depending on the model, model year, and grade, so be sure to measure the steering wheel outer diameter and check the size. * For vehicles with a steering swi... Read More

By changing the reflective material from glass beads to diamond grade, we have achieved about 3 times the brightness (compared to the manufacturer). By using a prism as a reflective element, there are no gaps on the reflective sheet surface, making it possible to perform high-performance retroref... Read More

A fashionable floor mat that decorates your feet !! Introducing the new Giga for Hello Mat !! Right side (driver's seat side) separately. Non-slip processing on the back side. Washing with water is OK. Interior parts * There is no setting for passenger seat and central mats. * There are front... Read More

It is a back lamp for trucks.

The ring glows blue. Can be adjusted to any angle. No wiring required. Easy installation by simply inserting it into the cigarette lighter socket.

Traditional European sound horn. It is a European horn that uses the frequency of 480 / 400Hz, which is the origin of tradition. Plays the soft sound that is characteristic of the swirl horn. A generous volume of 113dB / 2m. By using a 90mm diameter horn, which is one class higher, as the base, i... Read More

Introducing an air-type yankee horn that can be easily attached like an electronic horn !! The stainless steel chrome surface coating creates a clear sound and harmony with bass and treble. Installation is as easy as an electronic horn. Sound parts * If you connect to the genuine horn button, you... Read More

Excellent. "Color change" and "too luxurious shine" that the new enamel material attracts. Luxurious shine and popular W stitch design. Uses a characteristic enamel material that looks different in color depending on the viewing angle and how the light hits it. It fits comfort... Read More

A light truck cover that protects the seat from dirt and water droplets. An apron type that can firmly cover your feet. You can sit on the seat without worrying about dirt on your clothes. Easy installation just by putting it on the seat. The back side PVC coated polyester material is impermeable... Read More

Soften the sun and drive comfortably. Easy installation by simply sandwiching it with a genuine sun visor. Interior parts * Please note that this product may not be installed depending on the shape of the genuine sun visor, etc. * Do not use at night or in a tunnel as the visibility will be extre... Read More

When you want to extend the genuine shift lever. Interior parts * The shift knob orientation adjustment nut is not included.

Dress up the interior of the car with the brilliance of crystals. It is a general-purpose type for MT cars and AT cars (without shift button). Suitable for 3 sizes of knob shaft diameter 8-1.25, 10-1.25, 12-1.25. To the shift knob * Do not use for any other purpose.

Uses an anti-glare flat lens that makes it easy to get a sense of distance. Follow the blind spots that cannot be captured with a genuine mirror. The metal part is rust-resistant stainless steel! Exterior parts * This product is compatible with mirror stays of 20 to 32 mmΦ.

For rotating lights * Do not use for anything other than rotating lights. It may cause a serious accident such as a vehicle fire.

* Can only be used for repairing vehicles produced before January 1, 2006. Please use it so as not to violate automobile-related regulations such as safety standards.

* The outer diameter of the handle may differ depending on the specifications and model year. Please be sure to measure the outer diameter of the handle before purchasing.

The steering wheel cover also fits tightly! It is easy to turn the steering wheel back in the garage, parallel parking, etc. Operation is smooth due to the adoption of bearings. Interior parts * Install in a position that does not interfere with blinker operation or airbag operation. * Due to the... Read More

You can easily see the looseness of the TB tire nut. For checking loose nuts on trucks and bus tires

Easy to drive ♪ Handle Spinner Ideal for dressing up in the car! * Please note that the color tone may differ depending on the shooting environment. Processing may be required for installation. Also, since it is imported from overseas, there may be some small scratches during transportation. The ... Read More

Introducing a premium seat cover for the Mokomoko series! With batting, it is soft and comfortable to sit on! Luxury leather type! With a back magazine pocket for convenient storage! Interior parts * This product may not be installed depending on the model, model year, and grade shape. Please not... Read More

For trucks and industrial vehicles * Please do not install it on passenger cars with a capacity of 9 or less. * Please do not use it as a headlamp. * The round type has JIS4G class vibration resistance, and the square type has JIS7G class vibration resistance.

Bracket for ML-1, ML-2, ML-7, ML-8, ML-9, ML-10, ML-11. Can be attached to torii gates such as light trucks. Rust resistant stainless steel material.

* Can only be used for repairing vehicles produced before January 1, 2006. Please use it so as not to violate automobile-related regulations such as safety standards.

We specialize in press molding and resin molding, and are a product of an excellent parts manufacturing company for after-parts that has been in business for over 60 years, mainly tail lamps and tail lenses for large and medium-duty trucks.

Introducing a sword knob with outstanding impact !! For a unique dress up !! With orientation adjustment nut (12 x 1.25 x 1, 10 x 1.25 x 1). With 10 x 1.25 conversion adapter. It can also be used for 10 x 1.25 vehicles. Interior parts * This product is intended for events. There is a risk of dama... Read More