All Category

Pullers for Truck

View : Grid List
Filter

24 Item(s)

Set Ascending Direction
  1. Puller Rear shock hub puller
    NIPPEI KIKI Puller Rear shock hub puller
    A puller for removing the rear wheel of a truck. For truck buses from 2 to 6 tons.
    Trusco Part No.  853-5976  Mass (kg)  Main Unit Dimensions (mm)  190×180 
    Rating:
    100%
    from S$399.90
    Min. 2 days
  2. Front shock hub puller
    NIPPEI KIKI Front shock hub puller
    A puller for the front hub of heavy trucks and buses. 5-hole type (Fuso), 6-hole (UD, Isuzu, Hino). The contact surface can be set to a flat surface. With shock device. * Some front-wheel dual-axle trucks and trailers cannot be used.
    Case Dimensions (mm)  210×200×110  Mass (kg/set)  Range to Use (mm)  PCD/116~147 
    from S$599.90
    Min. 2 days
  3. Ball joint puller
    JTC Ball joint puller
    Rating:
    100%
    from S$429.90
    Min. 6 days
  4. Wheel bearing puller
    NIPPEI KIKI Wheel bearing puller
    The inner bearing for heavy trucks and buses can be removed without damage. It can be used for both front bearings and rear bearings. With shock device.
    Mass (kg)  Included Accessories  Nissan UD rear attachment  Cutting Capacity (mm)  140~170  Length, Bottom Part (mm)  330 
    from S$1,399.00
    Min. 4 days
  5. Pitman arm puller
    JTC Pitman arm puller
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$639.90
    Min. 6 days
  6. Rear shock hub puller
    NIPPEI KIKI Rear shock hub puller
    For large trucks and buses of 6TON or more, 10 bolts have been added, making it easier to pull out 6 to 10 hub bolt vehicles. With shock device. The contact surface of the hosing can be set to a flat surface. You can also pull out the dead axle.
    Mass (kg/set)  6.7  Range to Use (mm)  PCD/138~196  Case Dimensions (mm)  340×250×90  Thread Size  TM28×P5×300 
    from S$999.00
    Min. 2 days
  7. Anchor pin puller for heavy truck
    KOTO Anchor pin puller for heavy truck
    The lining fixing pin used for the drum brake of a large truck can be easily pulled out with a slide hammer and shaft. * Shaft (HP-S) and hammer (HP-H) are sold separately.
    from S$199.90
    Min. 4 days
  8. Nail for Pitman Arm Puller H-228
    NIPPEI KIKI Nail for Pitman Arm Puller H-228
    Suitable Model  H-228 
    from S$79.99
    Min. 4 days
  9. Brake shoe spring puller
    HASCO Brake shoe spring puller
    Ideal for Hino 4t cars! For brake linings with brim. Brake shoe spring attachment / detachment tool. * Can be used only for types in which the shoe spring is hooked in the hole of the shoe.
    from S$349.90
    Min. 4 days
  10. Pitman arm puller
    NIPPEI KIKI Pitman arm puller
    A dedicated puller used to pull out the pitman arm for medium-duty trucks and buses.
    Cutting Capacity (mm)  Nail opening / 30-110  Mass (kg)  1.8  Depth (mm)  95  Bolt  Center bolt / M20 × P1.5 × 160  Toe Length (mm)  150 
    from S$749.90
    Min. 4 days
  11. Mighty puller set
    NIPPEI KIKI Mighty puller set
    The pitman arm and tie rod end of large vehicles can be removed. (With 10 ton hydraulic jack) * Use of impact wrench is prohibited. * Please note that tightening the screws to the original position may cause damage.
    Dimension (mm)  (Pooler) 268 × 210 × 60  Mass (kg)  3.7  Case Dimensions (mm)  310×260×75  Cutting Capacity (mm)  Nail opening / 105 
    from S$2,299.00
    Min. 4 days
  12. Ball joint remover
    JTC Ball joint remover
    VOLVO Used to remove the end ball joint of the drag link.
    Main Compatible Genuine Part No.  9998758  RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Nail opening: 37mm 
    from S$479.90
    Min. 6 days
  13. Wheel ace spooler
    NIPPEI KIKI Wheel ace spooler
    Put a claw (2 or 3) on the rim of the wheel and pull it out. We also have attachments for dead axle shafts. With shock device. For both front and rear wheels. You can remove the wheel by giving a shock.
    Mass (kg)  14  Case Dimensions (mm)  325×235×120 
    from S$2,699.00
    Min. 4 days
  14. Front wheel bearing inner race puller
    HASCO Front wheel bearing inner race puller
    With an impact wrench, you can pull it out all at once!
    from S$1,499.00
    Min. 4 days
  15. Jumbo body puller
    NIPPEI KIKI Jumbo body puller
    For emergency fender restoration work of accident cars. Set on the board for even greater ease of use.
    Mass (kg)  17 (Hammer / 5)  Overall Length (mm)  900  Thread Size  Shaft / PF3 / 4 (M26) × W14  Case Dimensions (mm)  1020×400×110 
    from S$1,999.00
    Min. 4 days
  16. Crank pulley puller
    JTC Crank pulley puller
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1,299.00
    Min. 6 days
  17. Front hub stand 2
    HASCO Front hub stand 2
    For Hiace 200 series, Caravan E25 series, FF vehicles. Used for front hub removal work on hydraulic press For front hub removal work * Pressing work is a work that requires high pressure. Protect yourself with safety goggles and protective gloves, and give due consideration to your surroundings. ... Read More
    Applicable Diameter Range (Φmm)  95、1015、120 
    from S$2,299.00
    Min. 4 days
  18. Tail lamp hand puller
    KOTO Tail lamp hand puller
    With a total length of 400 mm and a Φ55 mm suction cup, the suction power is outstanding!
    Diameter (Φmm)  (Sucker) 55  Overall Length (mm)  400 
    from S$199.90
    Min. 5 days
  19. Joint puller 39mm
    KOTO Joint puller 39mm
    Tie rod, drag ring. Recommended for lower arms, etc.! * Be sure to apply grease etc. to the threads before use. * This product is a consumable item.
    Dimension E (mm)  39  Dimension A (mm)  26  Dimension B (mm)  59.5  Dimension C (mm)  81  Dimension D (mm)  97  Suitable for  Large passenger car-2t truck 
    from S$699.90
    Min. 5 days
  20. Anchor pin puller
    NIPPEI KIKI Anchor pin puller
    You can easily remove anchor pins for medium-sized and large-sized vehicles.
    Mass (kg)  11.5  Case Dimensions (mm)  525×335×120 
    Discontinued
  21. Thermostat puller for Isuzu Large
    HASCO Thermostat puller for Isuzu Large
    A thermostat (spacer) extraction tool exclusively for Isuzu large vehicles (6U engine).
    Discontinued
  22. Axle ball joint puller
    JTC Axle ball joint puller
    Toe Width (mm)  24  Specification  3.5t 4400cc  Jaw Opening Width (mm)  75  RoHS directive (corresponding to 10 substances)  Correspondence 
    Discontinued
  23. Wheel bearing puller
    NIPPEI KIKI Wheel bearing puller
    For medium-sized trucks 4-4.5TON. It can be pulled out without damaging the bearing. It is compact and can be set easily in a short time. With shock device. * It may not be possible to use it due to changes in bearing specifications.
    Effective Length (mm)  (Foot) 210  Mass (kg)  18  Included Accessories  Attachment / A-1, B-2, C-3, D-44  Shaft  Center shaft / M21 × P2.0 × L275  Case Dimensions (mm)  Metal case / 350 × 320 × 145  Suitable Holder  Attachment / HW-AB 
    Discontinued
  24. Spring pin metal bush puller
    JTC Spring pin metal bush puller
    Metal bush replacement hydraulic 10t ram and attachment set used for leaf springs of large vehicles
    Suitable Inner Diameter (Φmm)  48、48、48、55、44、36、33.5  Cylinder stroke (mm)  About 120  RoHS directive (corresponding to 10 substances)  Correspondence  Coupler screw size  Japanese standard 1/4 
    Discontinued
View : Grid List
Filter

24 Item(s)

Set Ascending Direction