Urea Water & Related Products
AQUA SYSTEM Container set for AdBlue BASICThis pump set is ideal for transferring AdBlue and water. For IBC tank for AdBlue / water transferMass (kg) 16 Discharge Rate (L/min) 35～40 Trusco Part No. 509-6774 Power Input (V) AC100 Specification Continuous operation Material (Main Unit) PP・SUSfrom S$2,699.00Min. 3 days- EICHI TWO Gun nozzle for ad blue urea waterApplicable hose diameter (Φmm) 25 Material PVC
- Takato Technica AdBlue flow meterA flow meter that shows the flow velocity and integrated flow rate. * The attached battery is for the monitor. * The meter is advanced due to the configuration test run.Measuring Range 10-90L/min Power Supply 2 AAA batteries Connector Diameter G1 male
- EICHI TWO Self-weight fall hose kit for IBC tankBy connecting to the outlet of the IBC tank, AdBlue / urea water can be transferred and supplied by its own weight drop. With gun nozzle * Please note that the packing at the connection port is easy to lose.Conform to (IBC tank) Kodama, Sanko, Schutzfrom S$319.90Min. 2 days
- EICHI TWO Liquid take-off valve for IBC tankConnect to the IBC tank outlet to remove AdBlue / urea water. With valve * Please note that the packing at the connection port is easy to lose.Conform to (IBC tank) Kodama, Sanko, Schutz
- EICHI TWO Manual pump set for ChemidrumA manual pump kit that attaches to the Chemidrum to transfer and supply AdBlue / urea water.from S$129.90Min. 2 days
- Takato Technica Auto stop gun nozzle for ad blue (light weight resin body)Applicable hose diameter (Φmm) 19from S$349.90Min. 2 days
- AQUA SYSTEM Manual gun nozzle for AdBlueIt is a manual gun nozzle for AdBlue and water. For transfer and subdivision of AdBlueMass (kg) 0.4 Connection Bore Diameter (Φmm) 19 (hose fitting) Trusco Part No. 828-9641 Operating Pressure (MPa) 0.3from S$319.90Min. 2 days
- EICHI TWO Air bleeding cap for IBC tankA cap that can bleed the air from the tank when it is transferred and supplied from the IBC tank.Cap Size (mm) Φ150from S$149.90Min. 2 days
- Takato Technica Auto stop gun nozzle for AdBlueIt is an auto stop gun nozzle that detects a full tank and automatically stops when transferring and supplying. Φ19 hose connection with swivelfrom S$499.90Min. 7 days
- PIUSI AdBlue / Urea Water PIUSI Manual Gun NozzleA gun nozzle that conforms to the ISO standard water supply caliber Φ19, which is used in light trucks, imported trucks, construction machinery / agricultural machinery, etc. ※made in Italy Connect to the tip of the hose to supply AdBlue / urea water in a clean state.from S$269.90Min. 6 days
- AQUA SYSTEM Digital flow meter for AdBlueTurbine digital battery-powered flowmeter. Calibration can be performed for each liquid used. For AdBlue / water measurement * Cannot be used for commercial purposes.Mass (kg) 0.4 Battery 2 AAA batteries (standard) Flow range (L/min) 6～120 Trusco Part No. 828-9643 Piping Connection Size G1 malefrom S$849.90Min. 2 days
- KyoritsuKiko AdBlue/Urea Water Gun Nozzle ADN Dedicated CapAdblue gun nozzle ADN dedicated cap (with chain and S-shaped hook). Snap it into the tip of the ADN nozzle. Hang the S-shaped hook on the frame of the IBC or the edge of the plastic drum.from S$17.99Min. 7 days
- Maruyama Chemical High Quality Urea Water AdBlue Urea SCR System Catalyst Liquid for Diesel VehiclesDensity (g/cm3) 1.0870-1.0930 (20 ℃ g / cubic cm) Refractive Index 1.3814～1.3843(20℃) Contents (L) 20 JIS Standard AUS 32 JIS K2247-1 JQ318008 Included Accessories Nozzle Packaging Pack in box Concentration (%) Urea (wt): 31.8-33.2 Ingredient Urea 32.5%, water 67.5%
- TRUSCO ad blueBreaks down nitrogen oxides in exhaust gas into harmless nitrogen and water. For exhaust gas treatment of diesel vehicles equipped with urea SCR system. *Be sure to read the Safety Data Sheet carefully before use. *Wear appropriate protective equipment (safety glasses, rubber gloves, etc.) as nec... Read MoreTrusco Part No. 257-1824from S$86.99Min. 2 days
- Takato Technica AdBlue simple dispenser kit for 24VA transfer and supply pump kit for AdBlue / urea water that can be attached to the IBC container. With flow meter and auto stop gun nozzle * When taking power from the vehicle, be careful of running out of battery. * Be sure to open and close the valve of the IBC tank and bleed air. * The attache... Read MorePower Supply DC24V 5A Conform to (IBC tank) Kodama, Sanko, Schutzfrom S$3,199.00Min. 18 days
- NISSEI CORPORATION AdBlue High -Quality Urea WaterIt has been examined by the Ministry of Economy, Trade and Industry registered certification body and has obtained "JIS mark certification" at all factories. The outer container is made of cardboard and the inner bag is made of polyethylene, and a special long nozzle (400 mm) that makes... Read MorePackaging Bag-in-box Included Accessories Dedicated long nozzle JIS Standard JIS K 2247-1
- AQUA SYSTEM ADBLUE Drum SetA pump set that is ideal for transferring AdBlue and water. For AdBlue / water transfer, for poly drums * Drums are sold separately.Mass (kg) 16 Discharge Rate (L/min) 35～40 Trusco Part No. 509-5719 Power Input (V) AC100 Specification Continuous operation Material (Main Unit) PP・SUSfrom S$3,199.00Min. 3 days
- KyoritsuKiko AdBlue / Urea water + GPI flow meterThe integrated / total integrated flow rate of the pump is simply measured. It is used by mounting it between the tip of the pump hose and the gun nozzle. * A separate hose nipple may be required. * Avoid using with a self-weight drop hose as the accuracy will deteriorate due to insufficient flow... Read MoreMass (g) 190 Connector G1 male Material Main body / nylon resin, etc. SUS316from S$799.90Min. 5 days
- Bond Holdings AdBlue High-Grade Urea Water Certified by the German Association of the Automotive Industry (VDA)The urea SCR system is an exhaust gas purification device that converts NOx into harmless nitrogen by adding urea in the muffler in order to reduce nitrogen oxides (NOx) among the exhaust gas components of the engine. Combustion efficiency is improved and PM is reduced by reducing NOx, and it com... Read MoreDensity (g/cm3) 1.0870-1.0930 (20 ℃ g / cubic cm) Refractive Index 1.3814～1.3843(20℃) Contents (L) 20 JIS Standard AUS 32 JIS K2247-1 JQ318008 Included Accessories Nozzle Packaging Pack in box Concentration (%) Urea (wt): 31.8-33.2 Ingredient Urea 32.5%, water 67.5%from S$86.99Min. 2 days
- KyoritsuKiko AdBlue / Urea Water Simple Gun NozzleThe cheapest and simplest gun nozzle. With lever holding function Connect to the tip of the Φ25 hose to supply AdBlue / urea water in a clean state. If durability is important, please purchase the AdBlue / urea water gun nozzle [ADN series].Hose Fitting Size 25mm Tip nozzle diameter (Φmm) 27 Material Body / Polypropylene
- PIUSI AdBlue / Urea water PIUSI Auto Stop Gun NozzleA gun nozzle that conforms to the ISO standard water supply caliber Φ19, which is used in light trucks, imported trucks, construction machinery / agricultural machinery, etc. ※made in Italy Connect to the tip of the hose to supply AdBlue / urea water in a clean state.from S$879.90Min. 5 days
- MonotaRO Urea Water High Grade AdBlue for Urea SCR System OnlyAdBlue(R) is a reducing agent used in urea SCR systems that decomposes nitrogen oxides (Nox) contained in exhaust gas into harmless water and nitrogen. This product is a product for exhaust gas treatment of diesel vehicles equipped with the urea SRC system. * Never use it for any other purpose. *... Read MoreJIS Standard JQ0314002 AUS32 JIS K2247-1 Included Accessories Nozzle Packaging Pack in box Ingredient Urea (32.5%), water (67.5%)Discontinued
Filter by categories
