All Category

4 Cycle Type

The 4-cycle type refers to an engine brush cutter powered by a 4-cycle engine. Engine brush cutters are tools for cutting grass by rotating a cutting blade at high speed, and are often used for forestry, agriculture and horticulture. As an accessory, there is an engine brush cutter with a shoulder band, protective glasses, and a tool set. There are various types, such as a type that has a stop switch at hand and is easy to operate, and a type that adopts an idle start in which the cutting blade does not rotate when the engine starts. For women and the elderly, an engine brush cutter that pushes and mows instead of shaking is suitable.

Other Related Pages

View : Grid List
Filter

5 Item(s)

Set Ascending Direction
  1. Engine brush cutter
    BIG-M (Maruyama Mfg) Engine brush cutter
    Universal type. 4-cycle backpack type. Gardens, shores, flatlands, banks.
    Operating time (minutes)  (Full) 60  Tank Capacity (L)  0.55  Displacement (mL)  25  Handle Type  Loop handle  Starting Method  N start  Specification  Stop switch location / hand (push) 
    Rating:
    80%
    from S$759.90
    Min. 6 days
  2. Spare blade for lawn mower RS-4003
    KINBOSHI Spare blade for lawn mower RS-4003
    For RS-4000 series Spare blade * Two replacement blades are required for each lawn mower RS-4003. Bolts for mounting spare blades are sold separately.
    Discontinued
  3. 4-cycle engine brush cutter
    BIG-M (Maruyama Mfg) 4-cycle engine brush cutter
    Equipped with Honda's 4-cycle engine with good startability, low noise and few failures. High power and low vibration type. Two-handed handle type suitable for mowing grass on flat ground. * Estimated operating time is when using the standard attached cutting blade.
    Displacement  25cm3(cc)  Mowing Blade Diameter (Φmm)  255  Type  4 cycles  Operating time (minutes)  (Estimated) About 60 minutes  Mass (kg)  5.1  Tank Capacity (L)  0.55 
    Discontinued
  4. Engine brush cutter 25 (cm3) two-handed handle
    BIG-M (Maruyama Mfg) Engine brush cutter 25 (cm3) two-handed handle
    HONDA 4-cycle engine with excellent low vibration and quietness
    Handle Type  Two-handed handle  Engine displacement (cm 3 25  Fuel Tank Capacity (L)  0.54  Mass (kg)  5.4  Operating time (minutes)  (Full tank) about 60 
    Discontinued
  5. Karutto brush cutter (4 cycles)
    Marunaka Karutto brush cutter (4 cycles)
    Equipped with HONDA GX25 4-cycle engine-Good fuel economy-Quiet sound-Few failures-Compliant with exhaust gas regulations
    Displacement  25.0mL  Main Unit Dimensions, Length L x Width W x Height H (mm)  1765×540×390  Handle Type  Two-handed handle  Specification  4 cycles  Mass (kg)  5.1 
    Rating:
    100%
    Discontinued
View : Grid List
Filter

5 Item(s)

Set Ascending Direction