HDD Optional Items

One 2.5-inch SSD / hard disk can be installed in one 3.5-inch bay. Since it is an integrated mounter, it can be fixed more easily and firmly than a product that combines multiple parts. The bay fixing screw holes are inches and have the same hole spacing as the two front or two rear 3.5-inch hard... Read More

A mounter for fixing 2.5-inch SSDs and hard disks in 3.5-inch bays. You can fix a 2.5-inch hard disk to your desktop computer. You can install two 2.5-inch devices with a height of 9.5 mm or less in one 3.5-inch bay. Since it is an integrated mounter, it can be fixed more easily and firmly than a... Read More

Mount two drives in a single 3.5-inch bay Includes SATA data & power cable Solid steel with holes for mounting drives vertically and horizontally Add 2.5-inch SSD performance to existing desktop computers Install two SATA hard drives in free 3.5-inch bays of desktop PCs Reuse unused laptop ha... Read More

Spacer for using 7mm-thick 2.5-inch HDD / SSD as 9.5mm-thick HDD → Convenient for SSD replacement Seal-type easy installation

FOR FRONT BAY MOUNTING: 3.5" - 5.25" front bay mounting bracket for mounting 3.5" floppy drives, external USB hubs, media card readers, fan controllers, etc. in the 5.25" front bay of a desktop PC. Includes mounting screws. A spare 5.25" front bay accommodates standard 3.... Read More

Front-accessible 5.25-inch bay with 3.5-inch SATA drive Trayless design that does not mount the drive in a separate tray / case Drive bay with lock Rubber internal cushioning Durability rating 50,000 times or more LED indicator that indicates power and operating status Supports SATA rev. 1.0 / 2.... Read More

Even a PC case without space for installing a 2.5-inch HDD/SSD can be installed in a 3.5-inch bay. In addition, effective use of the empty 3.5-inch bay is also possible. Two 2.5-inch HDD/SSD can be installed, so space can be used effectively. The material is steel, so it won't warp over time ... Read More

All metal structure Includes 4 mounting screws Increase storage capacity by mounting a 3.5-inch HDD in an unused 5-inch bay Used in computer cases that lack a 3.5-inch bay

No tools required: 2.5" HDD/SDD mounting bracket for easy installation of 2.5" SSD or HDD in 3.5" drive bay of desktop PC Save installation time: Easily install 2.5" hard disk or solid state drive in 3.5" bay. Mounting brackets that save technicians valuable time and effo... Read More

Build a storage system by adding 2.5-inch SAS or SATA drives to one 5.25-inch bay Supports a wide range of SSDs and HDDs with a height of 5 to 15 mm A mobile rack that can be mounted vertically or horizontally, with easy and correct tray insertion lock, and removable tray to protect the drive Ach... Read More

Compatible with 2.5 inch drives up to 15 mm thick Installed in a 3.5-inch drive bay (built-in or external type). Uses built-in standard mounting holes Install a 2.5-inch drive without tools Supports SATA 1.0 / 2.0 / 3.0 (up to 6Gbps) and SAS 1.0 / 2.0 (up to 6Gbps) Install a 2.5-inch SATA / SAS d... Read More

Two 2.5-inch SSDs / HDDs can be mounted on a single 3.5-inch drive Tool-free drive and bay mounting Supports drives from 5 mm to 12.5 mm in height No hassle to install a drive in a new system-ideal for system integrators Easily install a drive on your desktop computer in a business or home office... Read More

Rugged metal mounting bracket Includes 22-pin SATA data / power connector to separate 7-pin SATA and 4-pin peripheral power adapter cables Add 2.5-inch HDD performance to existing desktop computers Use 2.5-inch SATA HDDs for laptops in desktop 3.5-inch bays Use unused 2.5-inch SATA HDDs as additi... Read More

Single 2.5-inch SAS / SATA drive Backplane between drive systems Hot-swap drive Supports a wide range of SSDs and HDDs with a thickness of 5-15 mm Backplane lock & that can be mounted in either vertical or horizontal direction without tray insertion error Detachable tray protects drive Achiev... Read More

Improve work efficiency: Mobile rack for 3.5 inch SAS 2.0/SATA 3.0. Converts three 5.25" bays into hot-swappable interfaces Excellent compatibility: 3.5" SAS 2.0/SATA 3.0 removable rack. Supports SATA 1.0/2.0/3.0 and SAS 1.0/2.0 hard drives. Power and status LEDs in each bay Easy to use... Read More

Increase work efficiency: 3-drive hot-swap backplane. Converts two 5.25" bays into hot-swappable interfaces. Connect up to three 3.5" SATA or SAS hard drives (HDDs) Great compatibility: Versatile hard disk mobile rack that supports SATA 1.0/2.0/3.0 and SAS 1.0/2.0 hard drives. Ideal for... Read More

Stores 6 2.5-inch HDDs, 6 3.5-inch HDDs, and 3 M.2 SSDs. The outside is made of aluminum alloy, and the inside of the case is protected by EVA resin and ABS resin to protect HDD and SSD. It comes with a key.

Even a PC case without space for installing a 2.5-inch HDD/SSD can be installed in a 3.5-inch bay. In addition, effective use of the empty 3.5-inch bay is also possible. Two 2.5-inch HDD/SSD can be installed, so space can be used effectively. The material is made of plastic, so it is lightweight ... Read More

A 3.5-inch conversion mounter with a 70mm fan that is ideal for 2.5-inch HDDs / SSDs that are worried about heat generation. By attaching the fan to the mounter, it can also be used to improve the airflow in the bay and cool the devices fixed in the bay. A cooling space is secured by inserting a ... Read More

Equipped with an independent power switch that can turn on / off the HDD / SSD power supply individually! HDD case that can mount 10 3.5-inch SATA HDDs. * RAID function is not installed.

Two are convenient. Introducing a cradle with a clone function that allows you to easily add up to two HDDs / SSDs!

Ideal as a simple storage case! Convenient to carry! Easy HDD storage plastic case. (Skeleton Black)

It is a metal fitting for fixing one 3.5-inch HDD to the 5-inch bay.

Fix 2.5 inch SSD/HDD to PCI/PCI Express slot. Perfect when the front bay is full. Compatible with PCI and PCI Express slots by changing the position of the bracket fixing holes. The exposed SATA connector is guarded by the board to prevent damage to the connector. The board is aligned so that the... Read More

One 2.5 inch SSD/HDD can be installed in one 3.5 inch bay. Because it is an integrated mounter, it can be fixed more easily and firmly than products that combine multiple parts. By matching it with the internal black painted case, it creates a calm atmosphere.

High-speed data transfer with UASP support. Equipped with sleep / power supply interlocking function.

It is a removable rack that can mount up to 4 2.5-inch SATA HDDs / SSDs in a 5-inch bay.

A 5-inch bay with two 2.5-inch SSDs/HDDs or one 3.5-inch HDD can be installed with a built-in conversion mounter. The screw position for fixing the bay has the same hole spacing as a 5-inch device, so it has high compatibility. *It is not compatible with 2.5-inch equipment with the old screw posi... Read More

Slim optical drive case (SATA)

Easy HDD installation without tools! Introducing an eSATA compatible model in the "1 minute BOX" that allows HDD installation in 1 minute!

[HDD / SSD case] A 2.5-inch HDD case with a sophisticated SMART design and easy installation.

1.8 "IDE connection HDD ZIF cable 3 types set [ Toshiba (blue) -Toshiba (blue), Hitachi (white) -Hitachi (white), Toshiba (blue) -Hitachi (white) ] * The product is a general-purpose product for the domestic market, and we do not guarantee operation with all equipment and cable combinations... Read More

Mounter that fixes one 3.5-inch HDD in the 5-inch bay The 5-inch bay fixing hole is designed according to the 5-inch device. A simple, sturdy and luxuriously adopted ultra-thick 1.6 mm thick frame. The front and rear symmetrical design allows you to mount the drive without hesitation. * The produ... Read More

When disassembling a laptop computer or external HDD to take out the HDD, it is a tool that can be easily disassembled without damaging the housing. Insert the tip of the packer into the fitting part of the mold and rotate it to remove the claws and disassemble it "snap". Unlike metal s... Read More

Professional specifications chosen by creators! Ultra-high-speed transfer standard NVMe M.2 SSD portable case!

Conversion adapter (base) for mounting a 2.5-inch HDD in a 3.5-inch bay Ultra ATA66 compatible * When attaching an ATA cable or 2.5 HDD to this product, pay attention to the 1st line (pin) of this product when connecting. * The product is a general-purpose product for the domestic market. * The d... Read More

It is a metal fitting for fixing a 2.5-inch HDD to a 3.5-inch bay. 2.5 inch HDD conversion mounter

It will be a removable rack for servers

USB cable storage type 2.5 inch HDD case that is convenient to carry New product "MOBILE BOX"

A 2.5" or 3.5" SSD/HDD can be installed in one 5" bay. Two 2.5 inch SSD/HDD can be installed. The side screw holes for fixing the bay are the same hole spacing/mm holes as 5 inch devices. Devices are bottom hole fixed and bays are side hole fixed. Because it is an integrated mounte... Read More