All Category

Tripods & Monopods Accessories

View : Grid List
Filter

Items 1 - 40 of 217

Set Ascending Direction
  1. Camera screw
    ETSUMI Camera screw
    The bottom screw is 1/4 inch specification. You can use it for various purposes depending on your ingenuity.
    Screws  (Bottom screw) 1/4 inch  Diameter (Φmm)  24  Mass (g)  About 5 
    from S$8.99
    Min. 2 days
  2. Set screw adapter II
    ETSUMI Set screw adapter II
    Converts tripod screw holes for large screws (3/8 inch), which are mainly used for large pan heads and large and medium format cameras, to general machine screws (1/4 inch).
    Rating:
    100%
    from S$5.99
    Min. 2 days
  3. Holder Stand G Series
    AS ONE Holder Stand G Series
    The grip part can be rotated 360 degrees and can be used vertically or horizontally.
    from S$25.99
    Min. 2 days
  4. iPad mini / iPad compatible tablet holder
    FOTOPRO iPad mini / iPad compatible tablet holder
    "ID-200 +" is a tablet holder that enables you to take photos and videos using a tripod on your tablet device. It has a simple design and is spring-loaded for easy installation. Rubber material and sponge are used for the fixing part to prevent the tablet from being damaged. Because it ... Read More
    Mass (g)  106  Range of Application  Width or height within 17cm to 24cm  Dimensions, Width W x Height H x Depth D (mm)  95×183×35 
    from S$43.99
    Min. 2 days
  5. Female knife set screw
    ETSUMI Female knife set screw
    Both sides are set screws with 1/4 inch female screw holes for tripods.
    Height (mm)  About 12  Hole diameter (inch)  (Screw) 1/4  Mass (g)  About 40  Material  Aluminum  Diameter (Φmm)  About 38 
    from S$13.99
    Min. 2 days
  6. Sliding arm 2
    SLIK Sliding arm 2
    A close-up arm that can be used by attaching it between the elevator of a tripod and the pan head. The angle and the amount of protrusion can be adjusted freely. It is recommended that the tripod to be combined is a medium-sized class (pipe diameter around 28 mm) or larger. In addition to sliding... Read More
    Diameter (Φmm)  (Base part) 39  Stroke (mm)  (EV)370  Dimension (mm)  (Head mounting part) 39  Mountable mass (kg)  Pipe Diameter (Φmm)  24  Dimensions (Width W x Height H) (mm)  497×102  Mass (g)  530  Tripod Mounting Screw  U1/4、U3/8 
    from S$98.99
    Min. 2 days
  7. Bracket set screw Ⅱ
    ETSUMI Bracket set screw Ⅱ
    Spare parts for set screws that come with Etsumi bracket products. For various purposes depending on the device. When using it as a member such as a self-made camera bracket or grip, adjust it to an appropriate screw height through a metal fitting or washer of sufficient thickness. Made in Japan.... Read More
    Diameter (Φmm)  About 35  Dimension (inch)  (Screw) 1/4  Screw height (mm)  11 
    from S$19.99
    Min. 2 days
  8. Mini grip stand
    king Mini grip stand
    Lightweight and compact simple tripod. Combined with the separately sold phone holder (4906238817617), it is convenient for shooting with a smartphone. You can also use it as a bottom grip by bundling your legs. Silicone material is used for the camera mounting pedestal and the tip of the legs to... Read More
    Mounting Screw Diameter  1 / 4-UNC (thin screw)  Storage Capacity (mm)  31×83  Minimum Height (mm)  33  Mass (g)  40  Recommended load  600g 
    from S$16.99
    Min. 2 days
  9. Bracket set screw Ⅱ
    ETSUMI Bracket set screw Ⅱ
    Spare parts for set screws that come with Etsumi bracket products. For various purposes depending on the device. When using it as a member such as a self-made camera bracket or grip, adjust it to an appropriate screw height through a metal fitting or washer of sufficient thickness. * There is no ... Read More
    Dimension (inch)  (Screw) 1/4  Diameter (Φmm)  About 35  Screw height (mm)  About 11 
    from S$7.39
    Min. 2 days
  10. Tripod stand
    Sanwa Direct Tripod stand
    A tripod stand with casters that can be attached to your tripod later. It can be easily installed by simply placing a tripod and fixing it with screws. You can easily move the tripod when changing the shooting cut. The casters are equipped with stoppers and can be easily fixed and released by sim... Read More
    Allowable Load (kg)  15  Instruction Manual  Yes 
    from S$99.90
    Min. 5 days
  11. Digital camera sucker you DX
    ETSUMI Digital camera sucker you DX
    A small camera is fixed with a suction cup! It is easy to use with a large lever that has sufficient suction power and is easy to put on and take off. It can be used for various devices with tripod screws such as digital cameras, surveillance cameras, small monitors, and IC recorders.
    Dimensions, Diameter x Height H (Φmm x mm)Φ  About 70 × 85  Mass (g)  About 109  Load capacity (g)  About 400 
    from S$19.99
    Min. 2 days
  12. Male male set screw
    ETSUMI Male male set screw
    Both sides are set screws with 1/4 inch male screw holes for tripods.
    Diameter (Φmm)  About 38  Height (mm)  About 5  Hole diameter (inch)  (Screw) 1/4  Mass (g)  About 20  Material  Aluminum 
    from S$16.99
    Min. 2 days
  13. Phone holder
    king Phone holder
    A phone holder that allows you to set your iPhone or smartphone on a camera tripod or selfie stick. It is easy to use because it has a simple structure to sandwich. Compatible with smartphones with widths from 55mm to 88mm.
    Mass (g)  22  Mounting Screw Diameter  Tripod: 1 / 4-UNC (thin screw) 
    Rating:
    80%
    from S$11.99
    Min. 2 days
  14. Plate 2
    SLIK Plate 2
    A well-built aluminum die-cast plate. It is possible to mount two cameras on one tripod. A camera screw that can be moved according to the balance of the center of gravity. The tripod mounting screw (rotation) is also compatible with screws that cannot rotate, such as the tip of an elevator. Equi... Read More
    Dimensions, Width W x Depth D x Height H (mm)  315×50×20  Type of Sign  (Camera) Double nut type  Mass (g)  500  Mountable mass (kg) 
    from S$99.90
    Min. 2 days
  15. Clamp head for tripod
    SLIK Clamp head for tripod
    Dimensions, Width W x Depth D x Height H (mm)  150×80×95  Mass (g)  500  Dimension (mm)  Camera stand: 82 × 52 
    from S$169.90
    Min. 7 days
  16. Slick stand
    SLIK Slick stand
    By attaching it to the "camera screw" of the tripod, you can use the tripod as a table, and it is a wooden stand with a metal frame fixed to the bottom. The upper part of the table is equipped with a fall prevention frame. The orientation can be adjusted with a pan head, and the height ... Read More
    Dimensions (Width W x Depth D) (mm)  500×275  Mountable mass (kg)  Mass (g)  1500 
    Rating:
    20%
    from S$179.90
    Min. 2 days
  17. Photography article Triangular ring (2 pcs)
    king Photography article Triangular ring (2 pcs)
    from S$2.59
    Min. 6 days
  18. Smartphone holder SH-3
    ETSUMI Smartphone holder SH-3
    Since the mounting part is firmly sandwiched with grooved rubber, a sense of stability is sufficient. With two tripod screw holes, more flexible mounting and use is possible. The smartphone mounting width is 58 to 88 mm, and the maximum mountable thickness is 10 mm. Can also be used with the iPho... Read More
    Mass (g)  About 30  Load capacity (g)  About 200 or less  Width (mm)  (Smartphone fixed) 58-88 
    from S$17.99
    Min. 2 days
  19. Ball head M
    ETSUMI Ball head M
    A free pan head ideal for mounting compact digital cameras, surveillance cameras, sensors, etc. Adjustable in all directions up, down, left and right with a single lock screw operation.
    Load capacity (g)  400 or less  Height (mm)  54  Mass (g)  About 80  Maximum Diameter (Φmm)  30 
    from S$14.99
    Min. 2 days
  20. Clamp head for tripod
    SLIK Clamp head for tripod
    The parts of the camera screw part have been replaced with brass to strengthen it. If you attach it to the leg pipe of a tripod, you can shoot in a low position. If you attach it to the elevator, you can set a sub camera in addition to the main camera and shoot with two cameras. Clamp part that c... Read More
    Dimensions, Width W x Depth D x Height H (mm)  120×80×90  Installable pipe diameter (Φmm)  22~32  Maximum Loading Capacity (kg)  Mass (g)  400  Dimension (mm)  Camera stand: 73 x 40 
    from S$119.90
    Min. 2 days
  21. Stone bag DX
    SLIK Stone bag DX
    Attach it to the No. 1 pipe part of the tripod. You can lower the center of gravity and stabilize the tripod by putting stones inside.
    Dimension (mm)  (One side x depth) 380 x 95  Mountable mass (kg)  Suitable for  Equipment: Large tripod / medium tripod 
    from S$43.99
    Min. 7 days
  22. Free Angle Viewing R
    SLIK Free Angle Viewing R
    A small tripod that allows you to attach your smartphone directly. When stored, it can be folded into a compact rod. The smartphone holder part can be turned (swinged). Both horizontal and vertical positions are supported. Further tilt 36 °. The center pole expands and contracts 90 mm, and it als... Read More
    Mountable mass (kg)  0.3  Overall Height (mm)  223  Included Accessories  Bluetooth remote control  Mass (g)  120  Length when Shortened (mm)  160 
    from S$39.99
    Min. 7 days
  23. Dot sight DF-M1
    Nikon Dot sight DF-M1
    This is a useful sighting device for super-telephoto shooting. You can see it in a wide field of view with the same magnification as the naked eye, making framing more comfortable when shooting. Designed to be dust-proof and drip-proof, you can rest assured even in bad weather. A foldable type th... Read More
    from S$289.90
    Min. 6 days
  24. Tripod case + light series
    SLIK Tripod case + light series
    from S$22.99
    Min. 7 days
  25. Background support set
    ETSUMI Background support set
    A set of background paper support and stand that quickly transforms offices, corridors, warehouses, garages, etc. into full-scale studios. The stand has an air cushion and the maximum height is 2.8m. The bar for background paper support is a three-stage telescopic type that allows you to quickly ... Read More
    Width (m)  (Maximum roll paper) up to 2.9  Mass (kg)  (Stand alone) Approx.1.8  Number of Tiers  (Stand) 4, (Background paper support) 3  Elongation (cm)  5.3, (Stand) 280  Included Accessories  Carrying bag  Specification  With air cushion 
    from S$349.90
    Min. 6 days
  26. Bracket set screw DX mini
    ETSUMI Bracket set screw DX mini
    A special set screw for fixing to a tripod with the Etsumi bracket attached to the camera. Use it by replacing the set screw attached to the bracket. Even in combination with entry-level single-lens reflex cameras, mirrorless cameras, and high-end compact digital cameras, it is finished so that i... Read More
    Main Materials  Aluminum + stainless steel  Mass (g)  About 37  Included Accessories  2 resin washers  Diameter (Φmm)  About 38  Thickness (mm)  About 13 
    from S$19.99
    Min. 6 days
  27. Tripod case + light series
    SLIK Tripod case + light series
    A tripod case that prioritizes lightness
    Mass (g)  190  Inner Dimensions (mm)  80×600×110  Outer Dimensions (mm)  85×605×105  Length when Shortened (mm)  Applicable equipment: 600 or less 
    from S$23.99
    Min. 7 days
  28. Multipod smartphone R
    SLIK Multipod smartphone R
    A small tripod that can be equipped with a camera, smartphone, action camera and three types of equipment. There are two ways to use it: a table pod and a handheld tripod (grip). The free platform part can be used with both U1 / 4 inch camera screws and smartphone holders, and there is an accesso... Read More
    Included Accessories  Bluetooth remote control  Overall Height (mm)  215  Length when Shortened (mm)  195  Mass (g)  280 
    from S$58.99
    Min. 2 days
  29. Free Angle Smartphone Holder R
    SLIK Free Angle Smartphone Holder R
    A smartphone holder for attaching a smartphone to a tripod. You can also turn it around. Supports both vertical and horizontal positions. Tilt 36 ° is possible. Compatible smartphones have a width of 58 mm to 90 mm and a thickness of 12 mm or less. With Bluetooth remote control.
    Length when Shortened (mm)  74  Overall Height (mm)  74  Mountable mass (kg)  0.3  Included Accessories  Bluetooth remote control  Mass (g)  45 
    from S$26.99
    Min. 7 days
  30. Spigot adapter L
    ETSUMI Spigot adapter L
    This adapter converts the Φ17mm female dowel, which is mainly installed at the tip of light stands made by domestic manufacturers, into the Φ16mm male dowel used for light stands made overseas. The 16mm male side is not a perfect circle, and some flat surfaces have been cut to prevent the fixed p... Read More
    Overall Length (mm)  About 71  Mass (g)  About 105  Maximum Diameter (Φmm)  20  Diameter (Φmm)  16 (Osdabo), 17 (Osdabo) 
    from S$17.99
    Min. 6 days
  31. Mini ball head
    ETSUMI Mini ball head
    A small ball head for compact digital cameras. The maximum load is about 300. The specifications are sufficient to support compact digital cameras and smartphones with smartphone holders.
    Load capacity (g)  About 300 or less  Height H x Diameter (Φmm)  About 50 × 25  Mass (g)  About 50 
    from S$17.99
    Min. 6 days
  32. Multi-arm 520
    SLIK Multi-arm 520
    An accessory for mounting two cameras on a tripod. Two pan heads are attached to the bar, and the two cameras can be adjusted vertically and horizontally individually. The camera spacing can also be adjusted (vertical position is not possible). Equipped with a pan head mounting screw at the end o... Read More
    Width (mm)  520  Type of Sign  (Camera) Double nut type  Tripod Mounting Screw  U1/4、U3/8  Mass (g)  1200  Mountable mass (kg) 
    from S$269.90
    Min. 7 days
  33. Elevator hook for tripod 2
    SLIK Elevator hook for tripod 2
    It is used by attaching it to the bottom screw of the elevator on a tripod. Stability is improved by hanging the weight on the attached hook.
    Dimensions, Height x Width (mm)  76×47  Mass (g)  42 
    from S$13.99
    Min. 7 days
  34. Set screw size II
    ETSUMI Set screw size II
    A large set screw with a diameter of 60 mm that converts a 3/8 inch screw (German screw) into a 1/4 inch screw (international standard). With a hard mat, the camera is securely fixed. It is also possible to use this product as a spacer and combine equipment that is difficult to install. Reliable ... Read More
    Diameter (Φmm)  About 60  Height (mm)  About 12  Material  Aluminum + brass  Mass (g)  About 100 
    from S$35.99
    Min. 6 days
  35. Spigot adapter S
    ETSUMI Spigot adapter S
    This adapter converts the Φ17mm female dowel, which is mainly installed at the tip of light stands made by domestic manufacturers, into the Φ16mm male dowel used for light stands made overseas. Both ends have male screws for 1/4 inch and 3/8 inch tripods, respectively, making it convenient for at... Read More
    Overall Length (mm)  68 (including thread)  Mass (g)  About 70  Maximum Diameter (Φmm)  19 
    from S$12.99
    Min. 6 days
  36. WG wrist strap mount
    RICOH WG wrist strap mount
    You can shoot by attaching the camera to your wrist or arm. It can be attached even from the top of the garment. * WG series cameras other than WG-M1 and M2 cannot be fixed directly, so be sure to attach them to the separately sold "WG Holder O-CH1470".
    Mass (g)  About 55 
    from S$44.99
    Min. 6 days
  37. Dot sight bracket
    ETSUMI Dot sight bracket
    A convenient bracket for attaching an external sight, mirrorless camera, and high-magnification zoom digital camera. Recommended for Olympus OM-D series + Olympus dot sight sighting device EE-I. By opening both eyes while looking into the EVF with the right eye and looking into the sight with the... Read More
    Height (mm)  (Accessory shoe) 23  Mass (g)  90  Dimension (mm)  About 100 × 90  Mounting Plate Thickness (mm)  About 5 
    from S$55.99
    Min. 9 days
  38. Hot shoe adapter
    ETSUMI Hot shoe adapter
    For full-scale lighting, it is essential to keep the strobe away from the camera. Even if you want to use a large strobe, many entry SLRs do not have the essential sync contacts. By attaching this product to the camera's hot shoe (general shape), you can connect a synchro cord type strobe. It... Read More
    Mass (g)  About 15 
    from S$12.99
    Min. 7 days
  39. Ball head
    Hama Ball head
    The strong stopper is made in Germany. A small free platform recommended for those who can understand the difference. Its features are smooth operability and a powerful stopper. Recommended for high-end compact cameras.
    Diameter (Φmm)  (Head) 20  Height (mm)  39  Mass (g)  About 40  Size 
    from S$29.99
    Min. 7 days
  40. Tripod vertical bracket
    Velbon Tripod vertical bracket
    A vertical bracket for mirrorless interchangeable-lens cameras that can convert the center of gravity of the camera to the vertical position without significantly deviating from the tripod. You can shoot comfortably because changes in composition can be kept small. It attaches directly to a Velbo... Read More
    Mass (g)  62  Suitable for  Compatible shoe: QB-42, QB-32  Dimensions, Width W x Depth D x Height H (mm)  97×32×54  Slide width (mm)  36  Plate Dimensions, Width W x Depth D x Height H (mm)  89×24×46  Mounting Plate Thickness (mm)  Mounting Screw  Camera: UNC1 / 4 
    from S$59.99
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 217

Set Ascending Direction