Oil Cooling Equipment
- DAIKIN INDUSTRIES LT cooler (water-cooled oil cooling equipment)An oil cooling device (water-cooled) that has a large cooling capacity with a small amount of water. For fresh water and construction water. (Seawater cannot be used) With brazing that reliably transfers the heat of the fins. The threaded fins stir the oil. It can be installed 360 ° freely. The l... Read More
- DAIKIN INDUSTRIES oil coolerAn LT type oil cooler that provides greater cooling capacity with a smaller amount of water.Dimension V (mm) 2.3 Maximum Operating Pressure (MPa [kgf/cm 2 ]) Oil side: 1 [10], water side: 0.7 [7]from S$549.90Min. 4 days
- Hisaka Works Insulation Material for Exclusive Use of Brazing Plate Type Heat ExchangerIt is a heat insulating material exclusively for the brazing plate type heat exchanger. Armaflex, which has excellent performance, workability, and environment, is used as the heat insulating material. * It is the customer's job to attach the heat insulating material to the heat exchanger. * ... Read MoreMaterial Polyethylene foamfrom S$109.90Min. 8 days
- Hisaka Works Ratchet spanner for plate heat exchanger maintenanceRatchet spanner for tightening bolts of plate heat exchangers.from S$189.90Min. 8 days
- Hisaka Works Gasket for plate heat exchanger NBRNBR gasket for UX-005A-J. If the plate heat exchanger is used for a long period of time, the gasket will deteriorate, so regular maintenance is required. regular maintenance *When attaching the D plate gasket to the plate, please use the separately sold special adhesive (S1). *For gasket installa... Read MoreMaterial NBRfrom S$559.90Min. 8 days
- DAIKIN INDUSTRIES Oil CoolerAn oil cooler for cooling the pump drain of the hydraulic unit.Maximum Flow Rate (L/min) (Amount of passing oil) 4 Maximum Operating Pressure (MPa) 0.1 Operating Temperature Range (℃) 0~40 Oil resistance temperature (℃) 0~90 Mass (kg) 1 Overall Height (mm) 204.7 Operating Humidity Range 20~85%RH Overall Length (mm) 249 Trusco Part No. 364-8494 Suitable Lubricant Oil Petroleum hydraulic oil
- Hisaka Works Blazing Plate Heat Exchanger (with Copper Brazing)A high-performance, lightweight, compact, and highly pressure-resistant domestic plate heat exchanger that is joined between plates with copper brazing. It greatly contributes to energy saving and space saving of various equipment. * Because the end face of the plate is sharp, please use cut-resi... Read MoreMaterial (Plate) SUS316 Specification Wax: Copperfrom S$589.90Min. 8 days
- Hisaka Works Gasket for plate heat exchanger EPDMEPDM gasket for UX-005A-J. If the plate heat exchanger is used for a long period of time, the gasket will deteriorate, so regular maintenance is required. regular maintenance *When attaching the D plate gasket to the plate, please use the separately sold special adhesive (S1). *For gasket install... Read MoreMaterial EPDMfrom S$559.90Min. 8 days
- Hisaka Works Blazing Plate Heat Exchanger (with Nickel Brazing)A high-performance, lightweight, compact, and highly pressure-resistant domestic plate heat exchanger that is joined between plates with nickel brazing. It greatly contributes to energy saving and space saving of various equipment. Suitable when using fluids that are corrosive to copper. * Becaus... Read MoreMaterial (Plate) SUS316 Specification Wax: Nickelfrom S$1,599.00Min. 8 days
- Hisaka Works Gasket type plate heat exchanger NBRA high-performance, compact plate heat exchanger with a structure that seals between plates with gaskets. Since the plate can be disassembled, maintenance is also excellent. Steam heating, oil cooler, brine cooler, hot water supplySetting Pressure (MPa) 0.5 Setting Temperature (℃) 130 Dimensions, Width x Length (mm) 60 x 250 (nozzle pitch) Material (Gasket) NBR Nozzle shape R 3/4 threaded Material (Plate) SUS316from S$2,399.00Min. 8 days
- Hisaka Works Gasket type plate heat exchanger EPDMA high-performance, compact plate heat exchanger with a structure that seals between plates with gaskets. Since the plate can be disassembled, maintenance is also excellent. Steam heating, brine cooler, hot water supplySetting Pressure (MPa) 0.5 Setting Temperature (℃) 150 Dimensions, Width x Length (mm) 60 x 250 (nozzle pitch) Material (Gasket) EPDM Nozzle shape R 3/4 threaded Material (Plate) SUS316 Suitable Fluid steam, fresh water, brinefrom S$2,399.00Min. 8 days
- Hisaka Works Brazing Plate Type Heat Exchanger Dedicated Fixing BracketStainless steel metal fittings for fixing the brazing plate heat exchanger. * Fixing bracket body, bolts, nuts, washers, and spacers are included. * The base plate on the back and bottom of the heat exchanger is not included.Material Stainless steelfrom S$58.99Min. 8 days
- Taisei Kogyo Air-Cooled Heat Exchanger ATKAn air-cooled oil cooler ideal for use in environments where cooling water cannot be used. Small air-cooled oil cooler. Selectable from a variety of voltage settings.Material (Radiator) Aluminum Maximum Operating Pressure (MPa) 1.0 Input (W) (50/60Hz) 35/33 Noise level (dB) (50 / 60Hz) 56/60 Suitable Fluid General hydraulic oilDiscontinued
- Taisei Kogyo Heat Exchanger FCDSince it is a floating tube plate type, the tube nest can be cleaned and replaced. Ideal for use in places with a lot of dirt on the shell side (oil side). Compact yet high-performance design using Φ9 / 28 mountain low fin tube made by the manufacturer. Three types of models can be selected for e... Read MoreDiscontinued
- DAIKIN INDUSTRIES oil coolerOil temperature (℃) 0~90 Suitable Lubricant Oil Petroleum hydraulic oil Mass (kg) 3 Trusco Part No. 364-8508 Length x height (mm) 249×288.9Discontinued
- Taisei Kogyo Air-cooled heat exchanger ATLAn air-cooled oil cooler that is ideal for use as a drain cooler. Small air-cooled oil cooler.Maximum Operating Pressure (MPa) 1.0 Material (Radiator) Aluminum Suitable Fluid General hydraulic oil Cooling area 0.65m2Discontinued