All Category

Manifold Blocks

A manifold block is a unit that creates holes in the metal blocks, attaches solenoid valves, etc. to the positions of the holes, and creates an oil flow path between the holes in the block without connecting the equipment with piping. By combining modular stack valves and solenoid valves and connecting them to the manifold block, it is possible to configure several hydraulic flow paths. The solenoid valve sub-plate is a dedicated manifold block made to match the flow path of the solenoid valve, and there are sub-plates for various valve operations such as relief valves and pressure reducing valves. The pressure can be used from 7Mpa to 25Mpa.
View : Grid List
Filter

Items 1 - 40 of 70

Set Ascending Direction
  1. 02 series stack valve Bypass block
    DAIKIN INDUSTRIES 02 series stack valve Bypass block
    Pipe Connection Diameter  1/4  Maximum Operating Pressure (MPa)  25  Flow Rate (L/min)  (Maximum) 40  Control Port 
    from S$159.90
    Min. 32 days
  2. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking on a solenoid valve and a modular stack valve, you can easily configure a circuit of 1 to 3 systems.
    Specification  Manifold block  Pipe Connection Diameter  1/2  Maximum Operating Pressure (MPa)  35  Type of Thread  Rc  Number of Port 
    from S$1,399.00
    Min. 32 days
  3. Manifold (branch)
    Koyo Manifold (branch)
    Material  (Joint body) JIS H3250 C3604  Operating Temperature Range (℃)  -20 to 150 (no condensation)  Maximum Operating Pressure (MPa)  21  Regular Working Pressure (MPa)  14  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$27.99
    Min. 2 days
  4. Block manifold for hydraulic / pneumatic / air
    No Brand Block manifold for hydraulic / pneumatic / air
    Material (Main Unit)  SS400  Surface Treatment  Trivalent Chromate  Withstand Pressure (MPa)  20.6 
    Rating:
    80%
    from S$26.99
    Min. 2 days
  5. Manifold (terminal straight)
    Koyo Manifold (terminal straight)
    Material  (Joint body) JIS H3250 C3604  Operating Temperature Range (℃)  -20 to 150 (no condensation)  Maximum Operating Pressure (MPa)  21  Regular Working Pressure (MPa)  14  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$29.99
    Min. 12 days
  6. Base block
    NACHI (NACHI-FUJIKOSHI) Base block
    It is a block when using two or more solenoid valves and modular valves, and the piping is double-sided.
    Pipe Connection Diameter  3/8  Maximum Operating Pressure (MPa)  25  Flow Rate (L/min)  40 
    from S$169.90
    Min. 2 days
  7. Subplate for solenoid valve
    DAIKIN INDUSTRIES Subplate for solenoid valve
    Specification  Sub plate  Maximum Operating Pressure (MPa)  21  Type of Thread  Rc 
    from S$77.99
    Min. 2 days
  8. Destar Uni DB
    SHOWA Destar Uni DB
    Piping parts for multiple branches Combined use with flow proper unit and continuity unit
    from S$9.69
    Min. 5 days
  9. Dester Uni DA
    SHOWA Dester Uni DA
    Piping parts for multiple branches Combined use with flow proper unit and continuity unit
    Pipe Connection Diameter  M8×1.0 
    from S$11.99
    Min. 5 days
  10. Block manifold for water pressure
    No Brand Block manifold for water pressure
    Material (Main Unit)  SUS303  Surface Treatment  None 
    from S$57.99
    Min. 15 days
  11. High tegra manifold (025)
    JTEKT Fluid Power Systems (former TOYOOKI KOGYO) High tegra manifold (025)
    The 025 type has been standardized from 1 to 5 stations. As a control system, an electromagnetic switching valve, a high-tegral valve, etc. are stacked to form a circuit. All ports (P, R, A, B) are symmetrically drilled, so it is a very convenient specification when using a pressure switch circui... Read More
    Pipe Connection Diameter  3/8  Nominal Size  25  Type of Thread  Rc 
    from S$249.90
    Min. 8 days
  12. Mounting bolt (Hexagon socket head cap screw)
    JTEKT Fluid Power Systems (former TOYOOKI KOGYO) Mounting bolt (Hexagon socket head cap screw)
    Hexagon socket head cap screw for fixing electromagnetic switching valves, high-tegral valves, etc. as a control system on the manifold. 025 type and 03 type can be stacked from 2 to 5 layers. One set of four is used per circuit (one solenoid valve).
    Specification  Hexagon socket head bolt 
    from S$2.49
    Min. 4 days
  13. Connecting plate
    Yuken Kogyo Connecting plate
    Used for line pressure detection. For P and B lines
    from S$67.99
    Min. 5 days
  14. Dester block
    SHOWA Dester block
    The Destarp block DS type is a fixed quantity distributor that is a compact version of the conventional Destar block DSB type and has a very small discharge rate. The main body is integrated by die-casting, and the operation can be visually detected by the pin protrusion. The pins project when oi... Read More
    Specification  Dester block  Type  DS type  Regular working pressure (MPa [kgf / cm 2 ])  1~3[10~30] 
    from S$54.99
    Min. 18 days
  15. Subplate for DSG-01 series
    Yuken Kogyo Subplate for DSG-01 series
    Port size D  (Rc)1/4 
    Rating:
    20%
    from S$69.99
    Min. 63 days
  16. Manifold body
    TAIYO Manifold body
    from S$249.90
    Min. 11 days
  17. Terminal block
    SHOWA Terminal block
    from S$38.99
    Min. 5 days
  18. end plate
    Yuken Kogyo end plate
    Bypass plates are used in unidirectional flow circuits that do not require an electromagnetic switching valve.
    from S$49.99
    Min. 5 days
  19. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking solenoid valves and modular stack valves, 1 to 5 systems of circuits can be easily configured. * Solenoid valve mounting dimensions differ between 1 / 4Φ and 3 / 8Φ calibers.
    Specification  Manifold block  Maximum Operating Pressure (MPa)  25 
    from S$329.90
    Min. 3 days
  20. Dester Block DSA
    SHOWA Dester Block DSA
    Dester block is a low pressure discharge type metering distributor. The oil sent from the pump is held once and discharged by spring pressure. Used with a post-installation type positive displacement distributor and positive displacement pump
    Specification  Dester block  Type  DSA type  Regular working pressure (MPa [kgf / cm 2 ])  0.5~3[5~30] 
    from S$46.99
    Min. 5 days
  21. Sub plate
    DAIKIN INDUSTRIES Sub plate
    Specification  Sub plate  Maximum Operating Pressure (MPa)  21  Type of Thread  Rc  Dimension AG (mm)  24 
    from S$99.90
    Min. 3 days
  22. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking solenoid valves and modular stack valves, 1 to 5 systems of circuits can be easily configured.
    Specification  Manifold block  Pipe Connection Diameter  1/4  Type of Thread  Rc  Number of Port 
    from S$469.90
    Min. 4 days
  23. Gauge removal block
    NACHI (NACHI-FUJIKOSHI) Gauge removal block
    It is a modular block for connecting a pressure gauge etc. to the P port. Installation on the port is extremely easy.
    Type of Sign  Gasket mounting type  Nominal Diameter  1/8  Maximum Flow Rate (L/min)  50  Maximum Operating Pressure (MPa [kgf/cm 2 ])  25(255) 
    from S$68.99
    Min. 2 days
  24. Base block
    NACHI (NACHI-FUJIKOSHI) Base block
    It is a block when using two or more solenoid valves and modular valves, and the piping is double-sided.
    Pipe Connection Diameter  1/2  Maximum Operating Pressure (MPa)  25  Flow Rate (L/min)  80 
    from S$379.90
    Min. 2 days
  25. Dester Block DSB
    SHOWA Dester Block DSB
    Dester block is a low pressure discharge type metering distributor. The oil sent from the pump is held once and discharged by spring pressure. Used with a post-installation type positive displacement distributor and positive displacement pump
    Specification  Dester block  Type  DSB type  Regular working pressure (MPa [kgf / cm 2 ])  0.5~3[5~30] 
    Rating:
    100%
    from S$77.99
    Min. 8 days
  26. Sub plate
    DAIKIN INDUSTRIES Sub plate
    Specification  Sub plate 
    from S$57.99
    Min. 3 days
  27. Sub plate
    Yuken Kogyo Sub plate
    Specification  Sub plate 
    from S$66.99
    Min. 5 days
  28. Modular valve base plate
    Yuken Kogyo Modular valve base plate
    Maximum Operating Pressure (MPa)  25 
    from S$109.90
    Min. 5 days
  29. Mounting bolts
    TAIYO Mounting bolts
    Screws  M5?85 
    from S$69.99
    Min. 7 days
  30. Seal block
    TAIYO Seal block
    Included Accessories  O-ring (P-9 / 1B) x 4 
    from S$48.99
    Min. 11 days
  31. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking solenoid valves and modular stack valves, 1 to 5 systems of circuits can be easily configured.
    Specification  Manifold block  Pipe Connection Diameter  1/4  Type of Thread  Rc  Number of Port 
    from S$689.90
    Min. 4 days
  32. Sub plate
    NACHI (NACHI-FUJIKOSHI) Sub plate
    Specification  Sub plate 
    from S$86.99
    Min. 32 days
  33. Screw connection type sub-plate
    DAIKIN INDUSTRIES Screw connection type sub-plate
    For relief valve SR-G03-1-13
    Specification  Sub plate  Pipe Connection Diameter  3/8  Type of Thread  Rc 
    from S$87.99
    Min. 3 days
  34. Gasket mounting type subplate
    DAIKIN INDUSTRIES Gasket mounting type subplate
    Pressure reducing valve JGB * -For G03
    Specification  Sub plate  Pipe Connection Diameter  3/8  Type of Thread  Rc 
    from S$88.99
    Min. 3 days
  35. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking solenoid valves and modular stack valves, 1 to 5 systems of circuits can be easily configured.
    Specification  Manifold block  Pipe Connection Diameter  3/8  Type of Thread  Rc  Number of Port 
    from S$389.90
    Min. 4 days
  36. Blocking plate
    Yuken Kogyo Blocking plate
    It is used as a spare mounting surface or for closing unnecessary circuits.
    Maximum Flow Rate (L/min)  70  Nominal Size  Maximum Operating Pressure (MPa)  25  Plate  Proking plate 
    from S$68.99
    Min. 43 days
  37. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking on a solenoid valve and a modular stack valve, you can easily configure a circuit of 1 to 3 systems.
    Specification  Manifold block  Pipe Connection Diameter  1/2  Maximum Operating Pressure (MPa)  35  Type of Thread  Rc  Number of Port 
    from S$659.90
    Min. 32 days
  38. Manifold block
    DAIKIN INDUSTRIES Manifold block
    By stacking on a solenoid valve and a modular stack valve, you can easily configure a circuit of 1 to 3 systems.
    Specification  Manifold block  Pipe Connection Diameter  1/2  Maximum Operating Pressure (MPa)  35  Type of Thread  Rc  Number of Port 
    from S$999.90
    Min. 32 days
  39. Closure plate
    NACHI (NACHI-FUJIKOSHI) Closure plate
    This is a modular valve plate for closing unnecessary circuits or using the relief modular valve alone.
    Pipe Connection Diameter  1/8  Maximum Operating Pressure (MPa)  25  Type of Connection  Gasket mounting type 
    from S$58.99
    Min. 2 days
  40. Base plate
    Yuken Kogyo Base plate
    Maximum Operating Pressure (MPa)  25 
    from S$109.90
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 70

Set Ascending Direction