All Category

Ring Type Flange Gaskets

Middle packing for flanges is a sealing material used when connecting flanges (disc-shaped parts attached to the outside of pipes to connect them). Compared to the full-surface packing, it has a smaller ring shape. It can be tightened with low pressure to prevent leaks by sealing only around the pipe. There are products made of various materials such as natural rubber, Teflon, and joint sheets. Please be aware of this when purchasing, as durability and usage will vary depending on the material.
View : Grid List
Filter

Items 1 - 40 of 651

Set Ascending Direction
  1. Middle packing for flange (EPDM rubber) (10K)
    Osaka Spirit Middle packing for flange (EPDM rubber) (10K)
    A rubber material with weather resistance and high heat resistance. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure... Read More
    Maximum Operating Pressure (MPa)  Nominal Pressure  10K  Maximum Operating Temperature (℃)  120  Thickness (mm)  Material  EPDM (ethylene propylene rubber) 
    from S$0.81
    Min. 2 days
  2. Middle packing for flange (for steam)
    VALQUA Middle packing for flange (for steam)
    A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read More
    Tensile Strength (MPa)  (Horizontal direction) 12.5  Flexibility  (Vertical direction) 12  Operating Temperature Range (℃)  -50~214  Compression Ratio (%)  10 (at 34.3MPa)  Density (kg/m3 1759  Thickness (mm)  Return Ratio (%)  64 (at 34.3MPa)  Feature  Heat-resistant  Type  Middle packing for flange  Material  Non-asbestos 
    Rating:
    92%
    from S$2.49
    Min. 2 days
  3. Middle packing for flange (natural rubber)
    No Brand Middle packing for flange (natural rubber)
    Industrial packing, gasket material, cushioning material, etc.
    Elongation (%)  250  Main Component  Natural rubber, SBR  JIS Standard  K6380(AAD6040)  Thickness (mm)  Compression Set (%)  22 (70 ° C, 22 hours)  Operating Temperature Range (℃)  -50~70  Tensile Strength (MPa)  Hardness (Durometer A)  63  Type  Middle packing for flange  Standard  5K 
    Rating:
    76%
    from S$1.49
    Min. 2 days
  4. Middle packing for flange (non-ass)
    VALQUA Middle packing for flange (non-ass)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships. * Steam piping cannot be used Steam and steam (up to 100 ° C) are different, so please be careful when using them.
    Operating Temperature Range (℃)  -50~100  Thickness (mm)  1.5  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Nominal Pressure  10K  Tensile Strength (MPa [kgf/cm2])  17.0 [170] horizontal  Return Ratio (%)  57.0 (at 34.3MPa)  Color  Blue  Type  Middle packing for flange  Material  Non-asbestos 
    Rating:
    100%
    from S$1.19
    Min. 2 days
  5. Soft Seal
    NICHIAS Soft Seal
    It has excellent acid resistance, chemical resistance, and solvent resistance, and has a soft string-like shape with adhesive. It can be easily attached to a sealing surface with a complicated shape. Piping flange gaskets, piping sealants, tanks, casings, ducts, pressure vessels.
    Operating Temperature Range (℃)  -100~260  Base Material  Fluororesin (PTFE) soft type 
    Rating:
    93%
    from S$299.90
    Min. 2 days
  6. Middle packing for flange (for steam)
    VALQUA Middle packing for flange (for steam)
    A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read More
    Tensile Strength (MPa)  (Landscape) 13.1  Flexibility  (Vertical direction) 11  Operating Temperature Range (℃)  -50~214  Thickness (mm)  1.5  Density (kg/m3 1761  Return Ratio (%)  67 (at 34.3MPa)  Compression Ratio (%)  9 (at 34.3MPa)  Feature  Heat-resistant  Type  Middle packing for flange  Material  Non-asbestos 
    Rating:
    84%
    from S$1.19
    Min. 2 days
  7. Middle packing for flange (non-asbestos) (1.5T 10K)
    Osaka Spirit Middle packing for flange (non-asbestos) (1.5T 10K)
    A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read More
    Thickness (mm)  1.5  Nominal Pressure  10K  Maximum Operating Temperature (℃)  150  Suitable Fluid  General piping such as water and oil  Material  Non-ass joint sheet 
    Rating:
    70%
    from S$0.56
    Min. 2 days
  8. Joint sheet gasket TOMBO NO.1995 (inner packing, 10K)
    NICHIAS Joint sheet gasket TOMBO NO.1995 (inner packing, 10K)
    Operating Pressure  10K  Material  Inorganic filler, aramid fiber, NBR 
    from S$0.49
    Min. 2 days
  9. Middle packing for flange (high function type)
    VALQUA Middle packing for flange (high function type)
    Black Hyper No. GF300 is a non-asbestos sheet that is mainly composed of graphite and PTFE and has excellent heat resistance and chemical resistance. Since it is composed only of materials with excellent heat resistance and does not contain rubber at all, it is possible to tighten the rubber mate... Read More
    Temperature Range (℃)  -200~300  Feature  Heat resistance, chemical resistance  Type  Middle packing for flange 
    from S$5.39
    Min. 2 days
  10. Middle packing for flange (non-ass)
    VALQUA Middle packing for flange (non-ass)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Nominal Pressure  10K  Thickness (mm)  Return Ratio (%)  55.0 (at 34.3MPa)  Color  Blue  Tensile Strength (MPa [kgf/cm2])  Horizontal direction 15.3 (153)  Type  Middle packing for flange  Material  Non-asbestos 
    Rating:
    100%
    from S$1.79
    Min. 2 days
  11. Middle packing for flange (natural rubber)
    No Brand Middle packing for flange (natural rubber)
    Industrial packing, gasket material, cushioning material, etc.
    Main Component  Natural rubber, SBR  Elongation (%)  250  Standard  10K  Compression Set (%)  22 (70 ° C, 22 hours)  Hardness (Durometer A)  63  Thickness (mm)  Type  Middle packing for flange  Tensile Strength (MPa)  Operating Temperature Range (℃)  -50~70 
    Rating:
    100%
    from S$1.19
    Min. 2 days
  12. Clincil Top Flange Middle Packing (NA Joint Sheet)
    NICHIAS Clincil Top Flange Middle Packing (NA Joint Sheet)
    Since it is mainly composed of expanded graphite, it has excellent heat resistance, steam resistance, and corrosion resistance. It is not easily scratched and has excellent flexibility. Used for relatively hot flanges, valves and equipment. For low temperature fluids such as LNG, we recommend TOM... Read More
    Main Component  NBR, aramid fiber, expanded graphite 
    from S$1.39
    Min. 2 days
  13. Middle packing for flange (non-asbestos) (3T 10K)
    Osaka Spirit Middle packing for flange (non-asbestos) (3T 10K)
    A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read More
    Nominal Pressure  10K  Maximum Operating Temperature (℃)  150  Thickness (mm)  Suitable Fluid  General piping such as water and oil  Material  Non-ass joint sheet 
    from S$0.83
    Min. 2 days
  14. Middle packing for flange (NA joint sheet)
    NICHIAS Middle packing for flange (NA joint sheet)
    A brown NA (non-asbestos) joint sheet that does not contain any asbestos by adding an inorganic filler to inorganic fibers and aramid fibers and blending oil-resistant synthetic rubber as a binder. Gaskets for flanges, valves, equipment, etc. of various pipes
    Operating Temperature Range (℃)  -100~183  Thickness (mm)  1.5  Density (g/cm3 1.84  Tensile Strength (N/mm2 24.1  Return Ratio (%)  65(34.3N/mm2 Compression Ratio (%)  7(34.3N/mm2 JIS Standard  JIS F 0602 HJ、JIS F 7102 HJH  Type  Middle packing for flange  Material  Non-asbestos  Feature  Oil resistance 
    from S$0.86
    Min. 2 days
  15. Middle packing for flange (NA joint sheet)
    NICHIAS Middle packing for flange (NA joint sheet)
    A brown NA (non-asbestos) joint sheet that does not contain any asbestos by adding an inorganic filler to inorganic fibers and aramid fibers and blending oil-resistant synthetic rubber as a binder. Gaskets for flanges, valves, equipment, etc. of various pipes
    Operating Temperature Range (℃)  -100~183  Density (g/cm3 1.84  Tensile Strength (N/mm2 24.1  Thickness (mm)  Return Ratio (%)  65(34.3N/mm2 Compression Ratio (%)  7(34.3N/mm2 JIS Standard  JIS F 0602 HJ、JIS F 7102 HJH  Type  Middle packing for flange  Material  Non-asbestos  Feature  Oil resistance 
    Rating:
    100%
    from S$1.39
    Min. 2 days
  16. Code Seal Soft (Oval Type)
    VALQUA Code Seal Soft (Oval Type)
    A string-shaped size-free sealant made by modifying PTFE to make it soft and tough. It is used in places where the corrosion resistance of PTFE is required, the accuracy of the flange surface is not good, or the tightening force is insufficient.
    from S$299.90
    Min. 2 days
  17. Joint sheet gasket TOMBO NO.1120 (inner packing) 10K type
    NICHIAS Joint sheet gasket TOMBO NO.1120 (inner packing) 10K type
    Operating Pressure  10K  Material  Expanded graphite, aramid fiber, NBR 
    from S$1.99
    Min. 2 days
  18. Middle packing for flange (VALCALON gasket)
    VALQUA Middle packing for flange (VALCALON gasket)
    It is made into a sheet by blending PTFE with an inorganic filler. It requires chemical resistance and heat resistance, or is used as a gasket for extremely low temperature pipe flanges such as LNG, liquid nitrogen, liquid oxygen, and ethylene, and equipment. Not suitable for high concentrations ... Read More
    Temperature Range (℃)  -200~200  Type  Middle packing for flange 
    from S$4.79
    Min. 2 days
  19. Ring Type Gasket for Flange (EPDM)
    No Brand Ring Type Gasket for Flange (EPDM)
    The main raw material is carefully selected ethylene propylene rubber (EPDM), and since it does not have a double bond in the main chain, it has excellent heat resistance, ozone resistance, and weather resistance. In addition, because it has excellent water vapor resistance and low temperature ch... Read More
    Operating Temperature Range (℃)  -40~100  Low Temperature Impact Embrittlement Temperature (℃)  -55  Standard  10K  Thickness (mm)  Elongation (%)  350  Tensile Strength (MPa [kgf/cm2])  7.0[71]  Hardness (Durometer A)  A65S  Color  Black  Material  EPDM  JIS Standard  K6380(BAD6353)  Type  Middle packing for flange  Ozone Degradation Test (50pphm 40℃ 200h 20% elongation)  No crack 
    from S$0.96
    Min. 2 days
  20. Naflon PTFE punched gasket TOMBO NO.9007 (inner packing) 10K type
    NICHIAS Naflon PTFE punched gasket TOMBO NO.9007 (inner packing) 10K type
    A gasket molded from 100% pure fluororesin (PTFE). It is chemical resistant to almost all chemicals. It can be used in the production lines of high-purity chemicals and pharmaceuticals / foods that are highly pure and require high cleanliness. It complies with the Food Sanitation Law, foods, addi... Read More
    Operating Pressure  10K  Material  Fluorine resin (PTFE) 
    from S$2.49
    Min. 2 days
  21. Middle packing for flange (EPDM)
    No Brand Middle packing for flange (EPDM)
    The main raw material is carefully selected ethylene propylene rubber (EPDM), and since it does not have a double bond in the main chain, it has excellent heat resistance, ozone resistance, and weather resistance. In addition, because it has excellent water vapor resistance and low temperature ch... Read More
    Operating Temperature Range (℃)  -40~100  Low Temperature Impact Embrittlement Temperature (℃)  -55  Thickness (mm)  Elongation (%)  350  Standard  5K  Tensile Strength (MPa [kgf/cm2])  7.0[71]  Hardness (Durometer A)  A65S  Color  Black  JIS Standard  K6380(BAD6353)  Ozone Degradation Test (50pphm 40℃ 200h 20% elongation)  No crack 
    from S$1.09
    Min. 2 days
  22. VALFLON PTFE Adhesive Tape
    VALQUA VALFLON PTFE Adhesive Tape
    Length (m)  10  Base Material  Fluorine resin (PTFE)  Color  Gray  Adhesive  Silicone type 
    from S$46.99
    Min. 2 days
  23. Flange packing D6000 (inner packing, 10K)
    TRUSCO Flange packing D6000 (inner packing, 10K)
    Operating Pressure  10K 
    from S$0.73
    Min. 2 days
  24. Middle packing for flange (corrosion-proof type)
    VALQUA Middle packing for flange (corrosion-proof type)
    No.6500 anticorrosion type. Used as a gasket for stainless steel pipe flanges, equipment joints, covers, etc. It can be expected to suppress corrosion of stainless steel.
    Temperature Range (℃)  -50~183  Feature  Anticorrosion  Type  Middle packing for flange 
    from S$0.75
    Min. 2 days
  25. Joint sheet gasket TOMBO NO.1995 (inner packing, 5K)
    NICHIAS Joint sheet gasket TOMBO NO.1995 (inner packing, 5K)
    Operating Pressure  5K  Material  Inorganic filler, aramid fiber, NBR 
    from S$0.45
    Min. 5 days
  26. Flange packing FR4635
    ASK Flange packing FR4635
    No gasket paste required. A joint sheet that does not contain asbestos. It can be handled in the same way as conventional asbestos products. Heat resistance is improved by using a special heat resistant binder. It can withstand sudden temperature changes and pressure changes. High sealing perform... Read More
    Operating Temperature Range  -40 to 350 ℃ (saturated steam 250 ℃)  Thickness (mm)  Feature  Heat-resistant 
    from S$3.79
    Min. 2 days
  27. NA joint sheet gasket
    NICHIAS NA joint sheet gasket
    A general-purpose joint sheet that does not contain any asbestos. Gaskets for various piping flanges, valves, equipment, etc.
    Thickness (mm)  1.5  Operating Pressure  10k 
    from S$1.79
    Min. 2 days
  28. Middle packing for flange (non-asbestos joint sheet)
    Akitsu Middle packing for flange (non-asbestos joint sheet)
    A non-asbestos joint sheet (C-4430) with a practical temperature of 250 ° C (steam 200 ° C). No gasket paste required. Special surface treatment prevents sticking and corrosion. In addition to outstanding stress relaxation characteristics and pressure resistance load, it has outstanding resistanc... Read More
    Density (g/cm3 1.75  Operating Pressure  10k  Thickness (mm)  Return Ratio (%)  50(34.3N/mm2 Compression Ratio (%)  9(34.3N/mm2
    from S$3.09
    Min. 2 days
  29. Flange packing D6000 (Inner packing 5K)
    TRUSCO Flange packing D6000 (Inner packing 5K)
    Operating Pressure  5K 
    Rating:
    100%
    from S$0.62
    Min. 2 days
  30. Middle packing for flange (non-ass)
    VALQUA Middle packing for flange (non-ass)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Thickness (mm)  Return Ratio (%)  55.0 (at 34.3MPa)  Nominal Pressure  5K  Color  Blue  Tensile Strength (MPa [kgf/cm2])  Horizontal direction 15.3 (153)  Type  Middle packing for flange  Material  Non-asbestos 
    from S$1.49
    Min. 6 days
  31. Middle packing for flange (non-ass)
    VALQUA Middle packing for flange (non-ass)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Thickness (mm)  1.5  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Tensile Strength (MPa [kgf/cm2])  17.0 [170] horizontal  Return Ratio (%)  57.0 (at 34.3MPa)  Nominal Pressure  5K  Color  Blue  Type  Middle packing for flange  Material  Non-asbestos 
    from S$0.98
    Min. 6 days
  32. Code seal soft (flat cross section)
    VALQUA Code seal soft (flat cross section)
    Feature  Chemical resistance, heat resistance  Material  Fluorine resin (PTFE) 
    from S$299.90
    Min. 2 days
  33. Inside flange packing JIS5K
    Akitsu Inside flange packing JIS5K
    from S$0.71
    Min. 8 days
  34. Naflon PTFE punched gasket TOMBO NO.9007 (inner packing) 5K type
    NICHIAS Naflon PTFE punched gasket TOMBO NO.9007 (inner packing) 5K type
    Operating Pressure  5K  Material  Fluorine resin (PTFE) 
    from S$1.79
    Min. 5 days
  35. Joint sheet gasket TOMBO NO.1120 (inner packing) 5K type
    NICHIAS Joint sheet gasket TOMBO NO.1120 (inner packing) 5K type
    Operating Pressure  5K  Material  Expanded graphite, aramid fiber, NBR 
    from S$1.39
    Min. 5 days
  36. Code seal software (round section)
    VALQUA Code seal software (round section)
    Feature  Chemical resistance, heat resistance  Material  Fluorine resin (PTFE) 
    from S$339.90
    Min. 6 days
  37. Naflon PTFE low creep gasket TOMBO NO.9007-LC (inner packing) 10K type
    NICHIAS Naflon PTFE low creep gasket TOMBO NO.9007-LC (inner packing) 10K type
    Operating Pressure  10K  Thickness (mm)  Material  Fluororesin (PTFE), silica 
    from S$9.79
    Min. 5 days
  38. Middle packing for flange (non-asbestos joint sheet)
    Akitsu Middle packing for flange (non-asbestos joint sheet)
    A non-asbestos joint sheet with a practical temperature of 250 ° C (steam 200 ° C). No gasket paste required. Special surface treatment prevents sticking and corrosion. Joint sheet for flange.
    Thickness (mm)  Operating Pressure  5k  Type  Middle packing for flange  Material  Non-asbestos 
    from S$2.79
    Min. 2 days
  39. 50A / 2.0mm inner flange packing (JIS10K)
    ESCO 50A / 2.0mm inner flange packing (JIS10K)
    Nominal Diameter (A)  50  Esco Part No.  EA351CM-50 
    from S$8.99
    Min. 6 days
  40. 50A / 3.0mm inner flange packing (JIS10K)
    ESCO 50A / 3.0mm inner flange packing (JIS10K)
    Esco Part No.  EA351CN-50  Nominal Diameter (A)  50 
    from S$11.99
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 651

Set Ascending Direction