Gaskets
Packing is a padding used to prevent leakage of materials flowing through machinery and piping. By using this, the joint between piping and piping can be filled firmly. It is also used for the purpose of preventing foreign matters from entering by eliminating gaps. Packings are used in various places such as pumps and boilers, and there are various materials such as rubber and plastic, so they can be used properly according to the fluid and the place to use.
Other Related Pages
Osaka Spirit Middle packing for flange (EPDM rubber) (10K)A rubber material with weather resistance and high heat resistance. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure... Read MoreMaterial EPDM (ethylene propylene rubber) Maximum Operating Pressure (MPa) 1 Maximum Operating Temperature (℃) 120 Nominal Pressure 10Kfrom S$0.81Min. 2 days- NICHIAS Naflon carbon fiber packing (for rotation)Has excellent heat resistance. Carbon fiber has excellent chemical resistance and can be used for most fluids except strongly oxidizing acids. Maintains excellent sealing performance for a long period of time. The sliding torque is small and seizure is unlikely to occur. Various pumps, stirrers, ... Read MoreMaximum Operating Pressure (MPa) 2 Maximum Operating Temperature (℃) 260 Operating pH Range 0～14 Feature Heat resistance, chemical resistancefrom S$129.90Min. 13 days
- VALQUA Union packing (for steam)A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read MoreType Union packing Material Non-asbestos Operating Temperature Range (℃) -50～214 Tensile Strength (MPa) (Landscape) 13.1 Flexibility (Vertical direction) 11 Compression Ratio (%) 9 (at 34.3MPa) Return Ratio (%) 67 (at 34.3MPa) Feature Heat-resistant
- SEKISUI Eslon packing EPDMExcellent resistance to chlorine water. High sealing performance with double round protrusions. High sealing performance with low tightening torque. General industrial pipingMaterial Ethylene propylene rubber (EPDM) Type JIS10K Operating Pressure 10K Maximum Operating Temperature (℃) 100 Nominal Pressure 10K
- VALQUA Union packing (non-ass)Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.Type Union packing Material Non-asbestos Color Blue Operating Temperature Range (℃) -50～100 Density (g/cm3) 1.81 Tensile Strength (MPa [kgf/cm2]) Horizontal direction 15.3 (153) Compression Ratio (%) 10.0 (at 34.3MPa) Return Ratio (%) 55.0 (at 34.3MPa)
- ASAHI AV AV Full Face Type GasketSince it is an integrally molded product, there is no uneven thickness and the surface is smooth. Since there are two O-ring-shaped protrusions, it will not leak even if the surface pressure is low. Since the hardness of the rubber is appropriate, it can buffer against thermal stress and piping s... Read MoreMaterial EPDM (ethylene propylene rubber), etc. Standard 10K RoHS directive (corresponding to 10 substances) Correspondence Nominal Pressure 10K
- VALQUA Full face packing for flange (for steam)A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read MoreType Full face packing for flange Material Non-asbestos Operating Temperature Range (℃) -50～214 Tensile Strength (MPa) (Horizontal direction) 12.5 Flexibility (Vertical direction) 12 Compression Ratio (%) 10 (at 34.3MPa) Return Ratio (%) 64 (at 34.3MPa) Feature Heat-resistant
- VALQUA Middle packing for flange (for steam)A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read MoreType Middle packing for flange Material Non-asbestos Operating Temperature Range (℃) -50～214 Tensile Strength (MPa) (Horizontal direction) 12.5 Flexibility (Vertical direction) 12 Compression Ratio (%) 10 (at 34.3MPa) Return Ratio (%) 64 (at 34.3MPa) Feature Heat-resistant
- NICHIAS Union packing (NA joint sheet)A brown NA (non-asbestos) joint sheet that does not contain any asbestos by adding an inorganic filler to inorganic fibers and aramid fibers and blending oil-resistant synthetic rubber as a binder. Gaskets for flanges, valves, equipment, etc. of various pipesType Union packing Material Non-asbestos Operating Temperature Range (℃) -100～183 JIS Standard JIS F 0602 HJ、JIS F 7102 HJH Density (g/cm3) 1.84 Tensile Strength (N/mm2) 24.1 Compression Ratio (%) 7(34.3N/mm2) Return Ratio (%) 65(34.3N/mm2) Feature Oil resistance
- VALQUA Spiral Wound Gasket (Inner and Outer Rings)It does not require any skill because it can be sealed by simply tightening it to the specified mounting thickness (for example, changing the nominal thickness of 4.5 mm to 3.2 to 3.4). Especially for those with an outer ring, this ring is also useful as a guide for the tightening thickness. It w... Read MoreType Clean tight
- VALQUA Full face packing for flange (Non-Assembly)Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.Type Full face packing for flange Material Non-asbestos Color Blue Operating Temperature Range (℃) -50～100 Density (g/cm3) 1.81 Tensile Strength (MPa [kgf/cm2]) Horizontal direction 15.3 (153) Compression Ratio (%) 10.0 (at 34.3MPa) Return Ratio (%) 55.0 (at 34.3MPa) Nominal Pressure 10K
- No Brand Middle packing for flange (natural rubber)Industrial packing, gasket material, cushioning material, etc.Type Middle packing for flange Operating Temperature Range (℃) -50～70 Standard 5K JIS Standard K6380(AAD6040) Main Component Natural rubber, SBR Elongation (%) 250 Tensile Strength (MPa) 3 Hardness (Durometer A) 63 Compression Set (%) 22 (70 ° C, 22 hours)
- VALQUA Middle packing for flange (non-ass)Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships. * Steam piping cannot be used Steam and steam (up to 100 ° C) are different, so please be careful when using them.Type Middle packing for flange Material Non-asbestos Color Blue Operating Temperature Range (℃) -50～100 Density (g/cm3) 1.81 Tensile Strength (MPa [kgf/cm2]) 17.0 [170] horizontal Compression Ratio (%) 10.0 (at 34.3MPa) Return Ratio (%) 57.0 (at 34.3MPa) Nominal Pressure 10K
- NICHIAS NA vortex gasket Spiral wound gasket (inner / outer ring) non-ass typeEconomical vortex with NA paper as a filler.Maximum Operating Pressure (MPa) 7 Maximum Operating Temperature (℃) 350from S$9.89Min. 2 days
- VALQUA Gland Packing Carbon Fiber / Black V # 6201Coil packing made by treating carbonized fiber yarn with PTFE dispersion and lubricating oil, braiding it into a square cross section, and finishing it with PTFE, fine graphite, and lubricating oil. It is possible to service a relatively wide variety of fluids. Allowable PV value and peripheral s... Read MoreSpecification Aggressiveness to the axis, excellent Color Black Maximum Operating Pressure (MPa) 1.0 pH Value 2～12 Maximum Operating Temperature (℃) 200
- VALQUA Full face packing for flangeA non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read MoreType Full face packing for flange Material Non-asbestos Operating Temperature Range (℃) -50～214 Tensile Strength (MPa) (Landscape) 13.1 Flexibility (Vertical direction) 11 Compression Ratio (%) 9 (at 34.3MPa) Return Ratio (%) 67 (at 34.3MPa) Feature Heat-resistant
- Osaka Spirit Full face packing for flange (non-asbestos) (3T 10K)A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read MoreSuitable Fluid General piping such as water and oil Maximum Operating Temperature (℃) 150 Nominal Pressure 10K
- ThreeBond Three Sheet S Type (for Medium Surface Pressure)A versatile standard type for medium pressure. It is a standard product.Operating Temperature Range (℃) -40～150 Heat Resistance Temperature (℃) 150
- VALQUA Union packing (high function type)Black Hyper No. GF300 is a non-asbestos sheet that is mainly composed of graphite and PTFE and has excellent heat resistance and chemical resistance. Since it is composed only of materials with excellent heat resistance and does not contain rubber at all, it is possible to tighten the rubber mate... Read MoreType Union packing Temperature Range (℃) -200～300 Feature Heat resistance, chemical resistance
- VALQUA Full face packing for flange (Non-Assembly)Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.Type Full face packing for flange Material Non-asbestos Color Blue Operating Temperature Range (℃) -50～100 Density (g/cm3) 1.81 Tensile Strength (MPa [kgf/cm2]) 17.0 [170] horizontal Compression Ratio (%) 10.0 (at 34.3MPa) Return Ratio (%) 57.0 (at 34.3MPa) Nominal Pressure 10K
- No Brand Full face packing for flange (EPDM)The main raw material is carefully selected ethylene propylene rubber (EPDM), and since it does not have a double bond in the main chain, it has excellent heat resistance, ozone resistance, and weather resistance. In addition, because it has excellent water vapor resistance and low temperature ch... Read MoreType Full face packing for flange Material EPDM Color Black Operating Temperature Range (℃) -40～100 Standard 10K JIS Standard K6380(BAD6353) Elongation (%) 350 Hardness (Durometer A) A65S Tensile Strength (MPa [kgf/cm2]) 7.0[71] Low Temperature Impact Embrittlement Temperature (℃) -55 Ozone Degradation Test (50pphm 40℃ 200h 20% elongation) No crackfrom S$2.59Min. 2 days
- NICHIAS Soft SealIt has excellent acid resistance, chemical resistance, and solvent resistance, and has a soft string-like shape with adhesive. It can be easily attached to a sealing surface with a complicated shape. Piping flange gaskets, piping sealants, tanks, casings, ducts, pressure vessels.Operating Temperature Range (℃) -100～260 Base Material Fluororesin (PTFE) soft type
- VALQUA Middle packing for flange (for steam)A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read MoreType Middle packing for flange Material Non-asbestos Operating Temperature Range (℃) -50～214 Tensile Strength (MPa) (Landscape) 13.1 Flexibility (Vertical direction) 11 Compression Ratio (%) 9 (at 34.3MPa) Return Ratio (%) 67 (at 34.3MPa) Feature Heat-resistant
- MonotaRO Gland packingA highly complex gland packing that uses a special square mesh method by blending and impregnating carbon fiber with PTFE and special lubricating oil. Pumps for general chemicals, seawater and oil * Please do not use for any other purpose. * Store in a dry warehouse or indoors at room temperature... Read MoreMaterial Carbon fiber + PTFE + special lubricant Color Black Maximum Operating Pressure (MPa) 1 pH Value 2～12 Maximum Operating Temperature (℃) 200
- NICHIAS Full face packing for flange (NA joint sheet)A brown NA (non-asbestos) joint sheet that does not contain any asbestos by adding an inorganic filler to inorganic fibers and aramid fibers and blending oil-resistant synthetic rubber as a binder. Gaskets for flanges, valves, equipment, etc. of various pipesType Full face packing for flange Material Non-asbestos Operating Temperature Range (℃) -100～183 JIS Standard JIS F 0602 HJ、JIS F 7102 HJH Density (g/cm3) 1.84 Tensile Strength (N/mm2) 24.1 Compression Ratio (%) 7(34.3N/mm2) Return Ratio (%) 65(34.3N/mm2)
- SEKISUI Eslon packing EPDM 5K specificationRubber (EPDM) packing with excellent corrosion resistance. Has excellent chlorine water resistance and chemical resistance. Demonstrates high sealing performance with low tightening torque. It is suitable for various types of piping such as chemical piping in chemical factories, pure water piping... Read MoreSpecification JIS5K specification
- Osaka Spirit Middle packing for flange (non-asbestos) (1.5T 10K)A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read MoreMaterial Non-ass joint sheet Suitable Fluid General piping such as water and oil Maximum Operating Temperature (℃) 150 Nominal Pressure 10K
- Osaka Spirit Full face packing for flange (non-asbestos) (1.5T 10K)A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read MoreSuitable Fluid General piping such as water and oil Maximum Operating Temperature (℃) 150 Nominal Pressure 10K
- VALQUA Gland Packing Special Fiber Type, White V# 8137A coil packing made by treating a blended yarn of aramid fiber and artificial inorganic fiber with PTFE dispersion, braiding it into a square cross section, and finishing it with PTFE disversion. Clean packing that is white and does not use lubricating oil. It has excellent cost performance. It c... Read MoreSpecification Aggressiveness to the axis, excellent Color White pH Value 2～13 Maximum Operating Temperature (℃) 260
- Akitsu Flange packing (outer packing, non-asbestos joint sheet)A non-asbestos joint sheet with a practical temperature of 250 ° C (steam 200 ° C). No gasket paste required. Special surface treatment prevents sticking and corrosion. Joint sheet for flange.Operating Pressure 10K
- NICHIAS Joint sheet gasket TOMBO NO.1995 (inner packing, 10K)Material Inorganic filler, aramid fiber, NBR Operating Pressure 10Kfrom S$0.49Min. 2 days
- VALQUA Middle packing for flange (high function type)Black Hyper No. GF300 is a non-asbestos sheet that is mainly composed of graphite and PTFE and has excellent heat resistance and chemical resistance. Since it is composed only of materials with excellent heat resistance and does not contain rubber at all, it is possible to tighten the rubber mate... Read MoreType Middle packing for flange Temperature Range (℃) -200～300 Feature Heat resistance, chemical resistancefrom S$5.39Min. 2 days
- Osaka Spirit Full face packing for flange (natural rubber) (10K)It is the most elastic and general rubber material. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure is applied, it ... Read MoreMaterial Natural rubber Maximum Operating Pressure (MPa) 1 Maximum Operating Temperature (℃) 70 Nominal Pressure 10K
- VALQUA Middle packing for flange (non-ass)Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.Type Middle packing for flange Material Non-asbestos Color Blue Operating Temperature Range (℃) -50～100 Density (g/cm3) 1.81 Tensile Strength (MPa [kgf/cm2]) Horizontal direction 15.3 (153) Compression Ratio (%) 10.0 (at 34.3MPa) Return Ratio (%) 55.0 (at 34.3MPa) Nominal Pressure 10K
- NICHIAS Naflon Paste TOMBO No.9400Room temperature inert gasket paste in which colloidal particles of fluororesin are dispersed in water A versatile gasket paste that has excellent chemical resistance and can be used for acidic fluids and corrosive fluids. Various water-based fluids, various oil-based fluids, acidic fluids, corro... Read MoreOperating Temperature Range (℃) ～260 Hue Creamfrom S$87.99Min. 2 days
- VALQUA Spiral wound gasket (outer ring only)It does not require any skill because it can be sealed by simply tightening it to the specified mounting thickness (for example, changing the nominal thickness of 4.5 mm to 3.2 to 3.4). Especially for those with an outer ring, this ring is also useful as a guide for the tightening thickness. It w... Read MoreType Clean tight Nominal Pressure 10K
- No Brand Middle packing for flange (natural rubber)Industrial packing, gasket material, cushioning material, etc.Type Middle packing for flange Operating Temperature Range (℃) -50～70 Standard 10K Main Component Natural rubber, SBR Elongation (%) 250 Tensile Strength (MPa) 3 Hardness (Durometer A) 63 Compression Set (%) 22 (70 ° C, 22 hours)
- No Brand Full Face Packing for Flange (Natural Rubber) 10KIndustrial packing, gasket material, cushioning material, etc.Operating Temperature Range (℃) -50～70 Standard 10K JIS Standard K6380(AAD6040) Main Component Natural rubber, SBR Elongation (%) 250 Tensile Strength (MPa) 3 Hardness (Durometer A) 63 Compression Set (%) 22 (70 ° C, 22 hours)
- NICHIAS Clincil Top Flange Middle Packing (NA Joint Sheet)Since it is mainly composed of expanded graphite, it has excellent heat resistance, steam resistance, and corrosion resistance. It is not easily scratched and has excellent flexibility. Used for relatively hot flanges, valves and equipment. For low temperature fluids such as LNG, we recommend TOM... Read MoreMain Component NBR, aramid fiber, expanded graphitefrom S$1.39Min. 2 days
- SEKISUI Eslon packing EPDM 10K specificationSpecification JIS10K specification Material EPDM Maximum Allowable Pressure (MPa) 1.0(at20℃)from S$19.99Min. 2 days
