Hose & Tube Cutters

A tool for peeling the exodermis of the Elflex tube. Spatter-resistant tube peeling

Since it has two chevron blades, it can be rotated 180 ° and cut with a new cutting edge, and it has a built-in tape measure and can be cut to any length. (Measure length 1m) Since it comes with a tube guide, it can be cut cleanly and securely. Since it has a lock mechanism, it can be stored safely.

Tubes from Φ3 to Φ14 mm can be cut at right angles without breaking the circle. The replacement blade can be replaced with a single screwdriver. For cutting tubes from Φ3 to Φ14 mm. * Do not use for any other purpose.

You can easily cut without crushing the hose. Cutting various tubes up to Φ14 * Do not use for any other purpose. * The blade cannot be replaced.

Tubes from Φ3 to Φ16mm can be cut at right angles without breaking the circle. The transparent body makes it easy to cut with the cut mark on the tube. The spare blade can be easily replaced with a single screw. Low cost product series

For cutting rubber, sampler, and polyurethane hoses.

Smoothly cuts urethane and nylon tubes for pneumatic equipment piping (with tube guide). Uses high-grade cutlery steel with excellent sharpness and durability.

The replacement blade can be replaced with a single screwdriver. As a replacement blade for the Monotaro tube cutter TC-1. *Do not use for anything other than its intended purpose. *Not compatible with the old tube cutter (07320853).

The spare blade can be easily replaced with a single screw. Low cost product series

Assembly Tool M10: Lightweight and easy to carry. It can be assembled anywhere. Assembly machine M9: Significant reduction in assembly work time. Suitable for large numbers of hose assemblies. Hose Cutter HC01: Can cut hoses of all sizes. The pedestal has holes for fixing bolts and can be fixed. ... Read More

Ergonomic design makes it easy to grip. For cutting polyurethane tubes.

For cutting polyurethane tubes.

For cutting resin, polyethylene hoses, etc.

You can easily cut the groove just by inserting the tube and turning it. The fitting can be tightened firmly by making a groove in the tube.

It can cut PVC pipes with an outer diameter of up to 42 mm. Various resin hoses can be easily cut.

For cutting rubber, sampler and polyurethane hoses

Made of stainless steel, it is ideal for piping work of PTFE tubes. It can be placed on a tube support with a width of 20 mmΦ and cut at right angles with a light force.

A cutter for resin tubes and hoses with an outer diameter of up to 15 mm. It is a pocket-sized safety design that does not expose the steel blade due to the force of the spring when not in use. There is a 4mm hole on the handle to which the string can be attached.

Made of stainless steel, it is ideal for piping work of PTFE tubes. It can be placed on a tube support with a width of 20 mmΦ and cut at right angles with a light force.

For cutting PTFE tubes, there are two types, small and large. The tube can be cut at a right angle. It can be easily used at the work site.

A tool for peeling the outer skin of a spatter tube. Spatter-resistant tube peeling

For cutting plastic and rubber hoses.

It can be cut at a right angle without breaking the circle. For cutting tubes and hoses

By adopting a hexagonal blade, it lasts 6 times longer. Comes with a 1m measure. For cutting tubes and hoses

Spare blade for EA338A-28

Used for setting the spare blade on the main body.

Nipper type highly durable resin tube cutter. Can cut tubes up to 13 mm.

Since it is auto-cut, you can easily cut the copper tube. You can also work with a handle (sold separately: EA203CG-14).

Since it is auto-cut, you can easily cut the copper tube. You can also work with a handle (sold separately: EA203CG-16).

Spare blade for C-18. It can be easily replaced with a screwdriver. Spare blade for C-18

Since it is auto-cut, you can easily cut the copper tube. You can also work with a handle (sold separately).