Pneumatic Auxiliary Equipment
A pneumatic auxiliary device is a regulator that maintains the pressure of the air compressed by the compressor, a filter for removing drain water and solid foreign matter generated by compressing the air, and lubricating oil mixed in the compressed air. This term refers to the role lubricator. Both play an important role in avoiding problems with pneumatic equipment, and many filters and regulators are integrated. There are also auto drain and semi-auto drain filters, so there are many that can easily drain water.
- MonotaRO Regulator Small SizeA small type pressure reducing valve. Keeps the pressure from the compressor stable. With pressure gauge and bracket Decompresses compressed air and supplies constant pressure throughout the pneumatic line * Do not use for any other purpose.Pressure Setting Range (MPa) 0.05~0.85 Maximum Operating Pressure (MPa) 0.96 Pipe Connection Diameter 1/4 Maximum Flow Rate (L/min) 1100 Operating Temperature Range (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa Type of Thread Rc Pressure Gauge Connection Size Rc1/8 Type of Sign With bracket Pressure Gauge With pressure gauge
- CKD Filter / regulator (SELEX) With auto drainCompact integration of air filter and regulator * Bracket is not includedFiltration (μm) 5 Suitable Fluid Compressed air
- KINKI FACTORY Mini air filterOperating Pressure Range (MPa) 0.7~1 Maximum Operating Pressure (MPa) 1 Withstand Pressure (MPa) 1.5 Mass (g) 106 Width (mm) 41 Overall Length (mm) 89 Type of Thread G、Rc Connector Diameter Inlet G1 / 4, Exit RC1 / 4
- CKD GA400 series differential pressure gaugeThe life of the air filter can be managed.
- MonotaRO Filter Regulator Semi-Auto DrainThe filter and regulator are integrated to save space! The filter is a semi-automatic drain type, so draining is easy. Drain is automatically drained when no pressure is applied. When pressure is applied, the drain can be drained manually. It is possible to remove solid foreign matter of 5 μm or ... Read MorePressure Setting Range (MPa) 0.05~0.85 (exit side) Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Drain Port Size (Rc) 1/8 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Material (Main Unit) Aluminum alloy Suitable Fluid Compressed air Set Pressure Unit MPa Material (Lid) Polyacetal Material (Bowl) Polycarbonate Type of Thread Rc Pressure Gauge Connection Size Rc1/8 Auto Drain Specification Semi-auto drain Type of Sign With bracket Pressure Gauge With pressure gauge Case Zinc alloy case with case guard
- MonotaRO Air Filter Semi-Auto DrainDrain removal of compressed air is possible. Since it is a semi-automatic drain type, draining is easy. When no pressure is applied, the drain will be discharged automatically. When pressure is applied, the drain can be drained manually. It is possible to remove solid foreign matter of 5 μm or mo... Read MorePressure Setting Range (MPa) 0.05~0.85 (exit side) Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Drain Port Size (Rc) 1/8 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Moisture Removal Rate (%) 82 Material (Main Unit) Aluminum alloy Drain cock Auto Type of Sign Bracket Material Bracket: Aluminum alloy, Body: Steel Suitable Fluid Compressed air Set Pressure Unit MPa Type of Thread PT Material (Lid) Polyacetal Material (Bowl) Polycarbonate Pressure Gauge Connection Size Rc1/8 Filter Semi-auto drain filter drain outlet With drain valve Material (Ball Guard) Zinc alloy
- MonotaRO Filter Regulator Auto DrainIt is convenient for removing compressed air from the compressor and adjusting the flow rate. Since it is an auto drain type, there is no need to drain water. * Do not disassemble the pressure adjustment knob. It may cause air leakage. * Please use under the condition that the set pressure range ... Read MorePressure Setting Range (MPa) 0.05~0.85 (exit side) Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Drain Port Size (Rc) 1/8 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Material (Main Unit) Aluminum alloy Suitable Fluid Compressed air Set Pressure Unit MPa Material (Lid) Polyacetal Material (Bowl) Polycarbonate Type of Thread Rc Pressure Gauge Connection Size Rc1/8 Type of Sign With bracket Pressure Gauge With pressure gauge Case Zinc alloy case with case guard Auto Drain Specification auto drain
- MonotaRO Air Filter Auto Drain NOConvenient for removing compressed air from the compressor. Since it is an auto drain type, there is no need to drain water. * Do not use for anything other than its intended purpose. * Please use under the condition that the minimum working pressure (MPa) is satisfied.Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Drain Port Size (Rc) 1/8 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Material (Main Unit) Aluminum alloy Drain cock Auto Auto Drain Specification Auto drain NO Specification Auto drain NO Included Accessories Bracket Suitable Fluid Compressed air Set Pressure Unit MPa Type of Thread PT Material (Bowl) Polycarbonate Type of Sign With bracket filter drain outlet With drain valve Material (Ball Guard) Zinc alloy
- MonotaRO regulatorKeeps the pressure from the compressor stable Decompresses compressed air and supplies constant pressure throughout the pneumatic line * Release the handle lock downward before adjusting the pressure.Pressure Setting Range (MPa) 0.05~0.85 Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Maximum Flow Rate (L/min) 2500 Operating Temperature Range (℃) 5~60 Suitable Fluid Compressed air Set Pressure Unit MPa Material (Lid) Polyacetal Pressure Gauge Connection Size R1/8 Type of Thread Rc Type of Sign With bracket Pressure Gauge With pressure gauge Material (Main Unit) Zinc alloy
- MonotaRO Filter Regulator + Lubricator, Semi-Auto Drain TypeA 3-piece set that combines a filter regulator integrated type and a lubricator. Since the filter is a semi-automatic drain type, draining is easy. Drain is automatically drained when no pressure is applied. When pressure is applied, the drain can be drained manually. Removal of solid foreign mat... Read MorePressure Setting Range (MPa) 0.05~0.85 (exit side) Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Lubricator Oil Capacity (mL) 125 Filtration (μ) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Material (Main Unit) Aluminum alloy Type of Terminal Fitting Bracket mounting Suitable Fluid Compressed air Recommended Oil ISO VG-32 Set Pressure Unit MPa Type of Thread PT Material (Lid) Polyacetal Material (Ball) Polycarbonate Case With case guard Pressure Gauge With pressure gauge Auto Drain Specification With semi-auto drain Material (Ball Guard) Zinc alloy
- CKD Snap DrainLightweight and compact automatic drain discharger.Operating Pressure Range (MPa) 0.1~1 Operating Temperature Range (℃) 5~60 Suitable for Air compressor / 0.75-75kW Suitable Fluid Drain (water or oil) in compressed air Type Normally open white type
- MonotaRO Water separatorPrevents rust by preventing the inflow of moisture into the air tool. Since it has a transparent body, you can check the drain inside, and you can drain water by pressing the push valve, so you can use it repeatedly. It can be used to remove water. * Never modify, process or disassemble. * Do not... Read MoreWithstand Pressure (MPa) 0.62 Overall Length (mm) 88 Type of Thread PF(G) Mounting Screw PF(G)1/4
- MonotaRO Drain cockYou can easily open and close it by operating the handle. For replacing the drain cock of the compressor. For air piping joints. * If water or air leaks, replace it with a new one immediately.Maximum Operating Pressure (MPa) 1 Suitable Fluid Air Material (Main Unit) Brass Thread Standard Inch size Type of Thread R Pipe Connection Diameter R1/4
- NIHON SEIKI Drain TrapA magnet is built in the float, and the drain is automatically discharged by magnetic force. Since it is a float type, there is no wasteful air consumption. The accumulated drain is automatically discharged.Mass (kg) 1.1 Nominal Diameter 15A Ambient Temperature (℃) 5~60 Suitable Fluid Compressed air Drain Discharge Float type Outlet Fitting Size G Outlet Pipe Diameter G1/4 Intake Fitting Size Rc Intake Pipe Diameter Rc1/2 Auto Drain Specification auto drain
- KOGANEI Filter RegulatorCompactly integrated 5 μm air filter and small regulator. A pressure gauge with a preset marker is standard equipment. * The type with BG at the end of the product number has a bowl guard.Maximum Operating Pressure (MPa) 0.93 Assured Pressure Resistance (MPa) 1.47 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa Drain Discharge Manual drain Material (Bowl) Polycarbonate Type of Thread Rc Type of Sign With bracket filter drain outlet With drain valve Pressure Gauge With pressure gauge Auto Drain Specification Without auto drain
- CKD Air Filter (with Auto Drain / SELEX)Maximum Operating Pressure (MPa) 1 Operating Temperature Range (℃) 5~60 Included Accessories Bowl guard Suitable Fluid Compressed air Flow direction Left → right Type of Thread Rc Type White type
- TRUSCO Pressure Reducing ValveIt regulates compressed air to a stable pressure. It is a compact mini type. With pressure gauge and bracketPressure Setting Range (MPa) 0.05~0.85 Mass (kg) 0.25 Process air flow rate (m 3 / min) (ANR) 0.6 Operating Pressure (MPa) 1 or less Pipe Connection Diameter 1/4 Trusco Part No. 254-9590 Fluid Temperature (℃) 5~60 Overall Length (mm) 71.5 Suitable Fluid Air Set Pressure Unit MPa Type of Thread Rc Type of Sign With bracket Pressure Gauge With pressure gauge
- TRUSCO Regulator with filterIt is a compact device that integrates an air filter and a regulator. Keeps the pressure constant by removing moisture and debris from the air. It is a compact mini type. With pressure gauge and bracket * For TP-3RTOFGB, drainage will be automatic when the pressure drops below 0.05MPa. * It is no... Read MorePressure Setting Range (MPa) 0.05~0.85 Operating Pressure (MPa) 1 Filtration Accuracy (μm) 5 Fluid Temperature (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa Type of Thread Rc Type of Sign With bracket Pressure Gauge With pressure gauge
- CKD Regulator (SELEX)Adjust the air pressure. A compact regulator (pressure reducing valve) with an embedded pressure gauge. Pressure adjustment can be done with one hand. Locking is just one push. Small and large flow rate FRL2000 series. It is compact with a face-to-face dimension of 50 mm. High performance with ne... Read MorePressure Setting Range (MPa) 0.05~0.85 Maximum Operating Pressure (MPa) 1 Operating Temperature Range (℃) 5~60 Suitable Fluid Compressed air Included Accessories Pressure gauge, panel mounting nut Type of Thread Rc Flow direction Standard flow (left to right) Type White type relief With relief mechanism Pressure Gauge With standard pressure gauge (G401-W)
- MonotaRO Pressure gaugeIt is a device that makes it easy to see the pressure notation. Regulator / filter Replacement pressure gauge for regulator. * Please do not use for any other purpose.Operating Pressure (MPa) 0~1 Connector Thread 1/8PT Suitable Fluid Air
- MonotaRO Filter + regulator + lubricator unitIt is convenient for removing compressed air from the compressor, adjusting the flow rate, and supplying oil. Since it is an auto drain type, there is no need to drain water. * Do not disassemble the pressure adjustment knob. It may cause air leakage. * Please use under the condition that the set... Read MorePressure Setting Range (MPa) 0.05~0.85 (exit side) Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Pressure Gauge Connection Size 1/8 Lubricator Oil Capacity (mL) 150 Filtration (μ) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Suitable Fluid Air Material (Main Unit) Aluminum alloy Recommended Oil ISO VG-32 Set Pressure Unit MPa Type of Thread PT Material (Lid) Polyacetal Material (Bowl) Polycarbonate Case Polycarbonate case with case guard Auto Drain Specification With auto drain filter drain outlet With drain guide 1/8 Pressure Gauge With pressure gauge Material (Ball Guard) Zinc alloy
- NIHON SEIKI Air FilterLarge capacity screwing seriesOperating Pressure (MPa) 0.05~1 Withstand Pressure (MPa) 1.5 Overall Length (mm) 176 Filtration (μm) 40 Mass (g) 450 Ambient Temperature (℃) 5~60 Suitable Fluid Air Type of Sign Bracket sold separately Set Pressure Unit MPa Type of Thread Rc filter drain outlet With drain valve Drain cock manual
- KOGANEI RegulatorSmall but stable pressure regulation and large flow rate. Push-lock type regulator handle. The pressure adjustment is light and smooth. A pressure gauge with a preset marker is standard equipment.Pressure Setting Range (MPa) 0.05~0.83 Maximum Operating Pressure (MPa) 0.93 Assured Pressure Resistance (MPa) 1.47 Operating Temperature Range (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa exhaust mechanism Non-relief type Type of Thread Rc Lubrication Unnecessary Type of Sign With bracket Pressure Gauge With pressure gauge
- MonotaRO Filter regulator + Lubricator unit Auto drain typeIt is convenient for removing compressed air from the compressor, adjusting the flow rate, and supplying oil. Since it is an auto drain type, there is no need to drain water. * Do not disassemble the pressure adjustment knob. It may cause air leakage. * Please use under the condition that the set... Read MorePressure Setting Range (MPa) 0.05~0.85 (exit side) Minimum Working Pressure (MPa) 0.2 (entrance side) Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.2 Pressure Gauge Connection Size 1/8 Lubricator Oil Capacity (mL) 150 Filtration (μ) 5 Operating Temperature Range (℃) 5~60 Filter Drain Storage Volume (mL) 80 Suitable Fluid Air Material (Main Unit) Aluminum alloy Recommended Oil ISO VG-32 Set Pressure Unit MPa Type of Thread PT Material (Lid) Polyacetal Material (Bowl) Polycarbonate Case Polycarbonate case with case guard Auto Drain Specification With auto drain Filter Regulator Drain Port With drain guide 1/8 Pressure Gauge With pressure gauge Material (Ball Guard) Zinc alloy
- CKD WR Series Water RegulatorKnob shape that makes it easy to adjust the pressure. The pressure adjustment knob can be locked with one push For pressure control, flow control, and device protection.Maximum Operating Pressure (MPa) 1 Assured Pressure Resistance (MPa) 1.75 Operating Temperature Range (℃) 5~60 relief Non-relief type Type of Thread Rc Pressure Gauge Connection Size Rc1/8
- NIHON SEIKI RegulatorA diaphragm type large capacity pressure reducing valve. It regulates the air to a stable pressure.Fluid Temperature (℃) 5~60 Suitable Fluid Air Flow direction Left → right Set Pressure Unit MPa Pressure Gauge None Type of Thread Rc
- CKD Automatic Drain Discharger Snap DrainA new drain discharger that achieves long life and high reliability by adopting a new mechanism of snap method in addition to being lightweight and compact. There are two connection ports, up and down, and you can connect according to your needs.Draining Type (Eject) snap mechanism Operating Pressure (MPa) 0.15~1.0 Assured Pressure Resistance (MPa) 1.5 Fluid Temperature (℃) 5~60 Suitable Fluid Drain (water or oil) in compressed air Type Normal closed type, White
- CHIYODA TSUSHO Bronze blazer vent (for air)It does not take up space as a space-saving muffler for exhausting small valves and pilot air. It is also ideal for pressure release purposes.Volume (dB) (Decrease volume) 20 or more Operating Pressure (MPa) 1 Fluid Temperature (℃) 5~150 Suitable Fluid Air RoHS directive (corresponding to 10 substances) Correspondence
- NIHON SEIKI regulatorThe protrusion of the pressure gauge is suppressed. Comes with a pressure gauge and bracket. It regulates the air to a stable pressure.Pressure Setting Range (MPa) 0.05~0.85 Mass (kg) 0.55 Operating Pressure (MPa) 1.0 or less Overall Length (mm) 129 Fluid Temperature (℃) 5~60 Suitable Fluid Air Flow direction Left → right Set Pressure Unit MPa Type of Thread Rc Type of Sign With bracket Pressure Gauge With pressure gauge
- KOGANEI Filter RegulatorCompactly integrated 5 μm air filter and small regulator. A pressure gauge with a preset marker is standard equipment.Pressure Setting Range (MPa) 0.05~0.83 Maximum Operating Pressure (MPa) 0.93 Assured Pressure Resistance (MPa) 1.47 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa Material (Bowl) Polycarbonate Type of Thread Rc Type of Sign With bracket filter drain outlet With drain valve Pressure Gauge With pressure gauge Auto Drain Specification auto drainfrom S$169.90Min. 2 days
- CKD Air Filter (Separate Type)Efficiently removes water droplets and dust with the cyclone effect, and cleans compressed air. The bowl and element can be easily attached and detached with a single touch for easy maintenance.Mass (kg) 0.1 Maximum Operating Pressure (MPa) 1.0 Assured Pressure Resistance (MPa) 1.5 Filtration (μm) 5 Fluid Temperature (℃) 5~65 Overall Length (mm) 92
- NIHON SEIKI Lubricator BN-2301AA proper amount of lubricating oil is atomized and mixed into the compressed air to smooth the pneumatic equipment and prevent wear. Set after the regulator.Operating Pressure (MPa) 1.0 or less Ambient Temperature (℃) 5~60 Suitable Fluid Air Type of Thread Rc
- NIHON SEIKI Filter regulatorIt is a compact device that integrates an air filter and an air regulator. Keeps the pressure constant by removing moisture and debris from the air. * Drain discharge will be automatic when the pressure drops below 0.05MPa.Pressure Setting Range (MPa) 0.05~0.85 Operating Pressure (MPa) 0.05~1 Mass (kg) 0.5 Withstand Pressure (MPa) 1.5 Overall Length (mm) 244 Filtration (μm) 5 Ambient Temperature (℃) 5~60 Suitable Fluid Air Configuration of Equipment Filter + regulator Set Pressure Unit MPa Type of Thread Rc Auto Drain Specification Semi-auto drain Type of Sign With bracket Pressure Gauge With pressure gauge
- KOGANEI Air filterLow pressure loss despite 5 μm element. Click-on bowl allows one-touch attachment / detachment of the bowlMaximum Operating Pressure (MPa) 0.93 Assured Pressure Resistance (MPa) 1.47 Filtration (μm) 5 Ambient and Flowing Fluid Temperature (℃) 5~60 Suitable Fluid Air Set Pressure Unit MPa Drain Discharge Manual drain Material (Bowl) Polycarbonate Type of Thread Rc filter drain outlet With drain valve Type of Sign Without bracket
- CKD Air Filter (SELEX)Maximum Operating Pressure (MPa) 1 Ambient and Flowing Fluid Temperature (℃) 5~60 Included Accessories Bowl guard Suitable Fluid Compressed air Flow direction Left → right Type of Thread Rc Type White type Drain Discharge With manual drain cock
- CKD Lubricator (SELEX)Maximum Switching Current 0.5A Maximum Operating Pressure (MPa) 1.5 Number of Control Points 1point Maximum Switching Capacity 50VA, 50W (whichever is smaller) Operating Temperature Range (℃) 5~60 Maximum Operating Voltage (V) AC240、DC200 Included Accessories Bowl guard Suitable Fluid Compressed air Type of Thread Rc Type White type
- CKD Clean air unit (with auto drain)Pressure Setting Range (MPa) 0.05~0.85 Filtration (μm) 5 Operating Temperature Range (℃) 5~60 Suitable Fluid Compressed air Type of Thread Rc Flow direction Standard flow (left to right) Pressure Gauge Standard pressure gauge (with G401-W) exhaust mechanism With relief mechanism
- KOGANEI Air FilterLow pressure loss despite 5 μm element. Click-on bowl allows one-touch attachment / detachment of the bowlMaximum Operating Pressure (MPa) 0.93 Assured Pressure Resistance (MPa) 1.47 Filtration (μm) 5 Ambient and Flowing Fluid Temperature (℃) 5~60 Suitable Fluid Air Drain cock Auto Included Accessory Auto drain type drain cock, bowl guard Set Pressure Unit MPa Material (Bowl) Polycarbonate Type of Thread Rc filter drain outlet With drain valve Type of Sign Without bracket
- SHINANO 1/4 air regulatorFor air flow rate adjustmentMass (g) 50 Trusco Part No. 857-1125 Suitable Fluid Air Pipe Connection Diameter R1/4・Rc1/4 Type of Thread R・Rc
Filter by categories