Heating Units
- Sakaguchi E.H VOC Sakaguchi Peltier Kit SPE-UC-100Operating Temperature Range (℃) -50 to 150 or less Rated Voltage (V) DC14 Type of Control PID type voltage suppression method Rated Current (A) 10 Output Voltage (V) Peltier side: (Maximum) DC14 Input Voltage (V) AC100(85-132) Output Current (A) Peltier side: (Maximum) 10 Accuracy (℃) ± 0.3 or ± 0.5% of set value Power Consumption (VA) (Maximum) 150 Temperature Display Accuracy 0.1℃ Motor Rating DC12V/0.21A Endothermic amount (W) (Maximum) 33from S$3,299.00Min. 6 days
- HAKKO (Hakko Electric) Hot air beam controllerSince the pressure gauge is built in the main body, it can be easily controlled. It has a built-in flow rate limit switch. If there is no air supply, the heater will not operate, so you can use it with confidence. It has a built-in temperature controller. From monitoring the air temperature to fi... Read MoreSpecification Front connection method Suitable for K type thermocouple Type Standard Terminal Screw M4 Temperature Control ON/OFF control Hysteresis 3℃ Driving System SSR (Solid State Relay) switching Temperature Display Accuracy ±(0.5%F.S.+1digit) Room Temperature Correction Accuracy ±2℃(5~40℃)from S$3,899.00Min. 4 days
- HAKKO (Hakko Electric) Hot air generatorIt has excellent durability. Even though it is small, it has high capacity and excellent safety. Supports 150 ° C circulation use.Specification With controller Type of Control PID control method (SSR drive) Motor Type Condenser induction motor Terminal Screw M3.5 Mounting Hole 4-7 × 14 round length Temperature Sensor K type thermocouple Cable Specification, Type VCT Heater Type Seeds heater Earth Terminal M4 Installation Posture Horizontal Intake Gas Temperature (℃) -10~150from S$4,599.00Min. 4 days
- Sakaguchi E.H VOC Sakaguchi Peltier Kit SPE-UC-200Operating Temperature Range (℃) -50 to 150 or less Rated Voltage (V) DC12 Type of Control PID type voltage suppression method Rated Current (A) 6 Output Voltage (V) Peltier side: (Maximum) DC14 Input Voltage (V) AC100(85-132) Output Current (A) Peltier side: (Maximum) 10 Accuracy (℃) ± 0.3 or ± 0.5% of set value Power Consumption (VA) (Maximum) 150 Temperature Display Accuracy 0.1℃ Motor Rating DC12V:/0.14A(MAX)×2 Endothermic amount (W) (Maximum) 64from S$4,899.00Min. 7 days
- HAKKO (Hakko Electric) CrotonIt is integrally molded with epoxy glass, which has excellent heat resistance and chemical resistance, and has excellent durability. A graft carbon baku surface heat element is used for the heat generating element, and the power-saving structure provides a quick temperature rise and heat retentio... Read MoreMaterial Epoxy resin impregnated glass cloth Regular Temperature (℃) 40 or less (liquid temperature)from S$389.90Min. 3 days
- HAKKO (Hakko Electric) Oil heating unitIt can be used simply by connecting the piping and connecting the power supply (three-phase 200V). The legs for installation are removable. The heating element is durable and structurally robust. A thermometer can be attached.Material (Main Unit) SPCC (paint) Voltage (V) Three-phase 200 Maximum Operating Pressure (MPa) 0.3 Temperature Control Range (℃) 33~120 Temperature Control Liquid expansion thermostat Dimension E Rp1 Dimension D Rp1 Material (Pipe) SGP
- HAKKO (Hakko Electric) Stainless water heating unitA clean and durable water heating unit that uses a stainless steel plug heater as a heating element. The heater and tube of the wetted parts are all stainless steel. The heating element uses a stainless plug heater of Yakko standard product. Since the surface is electropolished, it has excellent ... Read MoreCapacity (kW) 10 Voltage (V) Three-phase 200 Maximum Operating Pressure (MPa) 0.1 Internal Capacity (L) (Tube) 3.1 Maximum Operating Temperature (℃) 80 Minimum Flow Rate (L/h) 120 Dimension F Rp3/4 Dimension G Rp3/4 Liquid Expansion Thermostat 30~80℃ Density of Effective Heating Area (W/cm2) 7.5 Inspection pressure (MPa) 0.4from S$3,999.00Min. 5 days
- HAKKO (Hakko Electric) Water heating unitA clean and durable water heating unit that uses a stainless steel plug heater as a heating element. It has excellent durability and only the heating element can be replaced. It is safe because it is equipped with a thermostat for setting the upper limit temperature and a thermal fuse. Since the ... Read MoreVoltage (V) Three-phase 200 Maximum Operating Pressure (MPa) 0.3 Surface Treatment Electrolytic polishing (sheath) Material (Cover) Iron (painted) Maximum Operating Temperature (℃) 80 Material (Pipe) SUS304 (stainless steel) Liquid Expansion Thermostat 30~80℃ Material (Heater Sheath) SUS316L (stainless steel)from S$2,999.00Min. 5 days
- Sakaguchi E.H VOC Mounting parts for far infrared heater [Safety holder + NO.5]A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.Size Insulator: Large Type Cfrom S$7.69Min. 6 days
- Sakaguchi E.H VOC Hot air generator "Micro cable air heater"Due to the special structural design using a sheath heater for the heating element, the heating efficiency of gas has been greatly improved. Due to the special internal structure, the surface temperature of the pipe body has been reduced. An energy-saving type heater that reduces power consumptio... Read MoreVoltage (V) 200 Insulation Resistance (MΩ) (DC500V) 5 or more Maximum Operating Temperature (℃) 500 (with built-in thermocouple) Flow rate (NL / min) 20~100from S$1,999.00Min. 6 days
- HAKKO (Hakko Electric) Electric steam generatorClean and safe. Since it is heated by an electric heater, it is clean without exhaust gas. It is easy to operate and can be used safely with fully automatic control. Energy Conservation. It can be used in 10 minutes after switching on. Thermal efficiency has been further improved by special heat ... Read MoreType For pure water Voltage (V) Three-phase 200 Maximum Operating Pressure (MPa) 0.5from S$19,990.00Min. 16 days
- Sakaguchi E.H VOC Mounting parts for far-infrared heater [Safety holder + NO.7]A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.Size Insulator: Small Type Cfrom S$6.49Min. 6 days
- Sakaguchi E.H VOC Mounting parts for far-infrared heater [Safety holder + NO.3]A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.Size Insulator: Large Type Afrom S$4.39Min. 6 days
- HAKKO (Hakko Electric) Hot air beamThe hot air beam is a heater for gas heating that has excellent high temperature durability and uses a cykan heater, cartridge heater, etc. as a heating element. The housing is resistant to heat and mechanical shock, and provides stable heat.Included Accessories Sensor: K type thermocouple Type D Material (Main Unit) SUS304 Highest Temperature (℃) 600 (Air temperature) Continuous Use Temperature (℃) 500 (Air temperature)from S$2,299.00Min. 6 days
- Sakaguchi E.H VOC Mounting parts for far-infrared heater [Safety holder + NO.8]A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.Size Insulator: Large Type Cfrom S$7.69Min. 11 days
- ThreeHigh Bottom heater GOEMON-150D (with insulation cover)A heating / heat retaining heater (with a heat insulating cover) exclusively for pail and itto cans that can heat up to 4 cans at the same time. Energy-saving design because it heats efficiently at the bottom. Easy and safe design that anyone can use. RoHS compliant product Heater / heat retentio... Read MoreDiscontinued
- ThreeHigh Bottom heater GOEMON-150 (without insulation cover)A heating / heat retention heater exclusively for pail and itto cans that can heat up to 4 cans at the same time. Energy-saving design because it heats efficiently at the bottom. Easy and safe design that anyone can use. RoHS compliant product Heater / heat retention heater for pail cans and itto... Read MoreDiscontinued
- HAKKO (Hakko Electric) Hot air generator 2000 seriesA lightweight household step stool with a simple design. For indoor cleaning, light bulb replacement, picking, etc.Material / Finish Aluminum alloy Number of Tiers 3Discontinued