All Category

Chucks

A scroll chuck is a tool that fixes an object by rotating the chuck and opening and closing the claws attached to the chuck. The chuck's claw is an integral type or a split type. Although it is very rarely used in ordinary households, it is used by attaching it to a lathe at the factory site.
View : Grid List
Filter

Items 1 - 40 of 312

Set Ascending Direction
  1. 3-jaw scroll chuck (integrated claw type)
    Kobayashi Tekko 3-jaw scroll chuck (integrated claw type)
    Number of Jaws  3 claws 
    Rating:
    80%
    from S$979.90
    Min. 2 days
  2. Precision manual chuck (single unit)
    JAPAN AUTOMATIC MACHINE Precision manual chuck (single unit)
    from S$779.90
    Min. 5 days
  3. Raw nail for Kitagawa
    MonotaRO Raw nail for Kitagawa
    * Do not use for any purpose other than its intended purpose.
    Material  S50C  Dimension E (mm) 
    Rating:
    89%
    from S$46.99
    Min. 2 days
  4. Chuck grease pro
    Kitagawa Iron Works Chuck grease pro
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$77.99
    Min. 2 days
  5. Chuck Handle
    Kitagawa Iron Works Chuck Handle
    * If you order by cash on delivery, it may be shipped the next day or later.
    Rating:
    70%
    from S$67.99
    Min. 2 days
  6. Kitagawa Nail (Hydraulic / Pneumatic) HO
    KATO Kitagawa Nail (Hydraulic / Pneumatic) HO
    Since it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.
    Material  S50C  Teeth Spacing  1.5 
    Rating:
    20%
    from S$59.99
    Min. 2 days
  7. Raw nail (for scroll) for sole (empire chuck)
    IZS Raw nail (for scroll) for sole (empire chuck)
    Dimension E (mm)  Type  For scrolling  Material  S45C 
    from S$74.99
    Min. 2 days
  8. Kitagawa raw nail (for scroll chuck) SK
    KATO Kitagawa raw nail (for scroll chuck) SK
    Since it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.
    Shape  Material  S50C  Dimension E (mm)  Dimension F (mm)  3.5 
    Rating:
    60%
    from S$69.99
    Min. 2 days
  9. Kitagawa T Nut (Jaw Nut)
    KATO Kitagawa T Nut (Jaw Nut)
    By setting it on the replacement claw in advance, you can replace the claw just by replacing it, and the setup change will be more efficient.
    Shape 
    Rating:
    40%
    from S$97.99
    Min. 2 days
  10. 3-jaw scroll chuck
    Mr. Meister 3-jaw scroll chuck
    Since the three claws work together, it is easy to center the material and it is used to grasp the material such as a circular prism or a triangular prism. Grasp the material
    Rating:
    73%
    from S$359.90
    Min. 2 days
  11. Iron raw nails for Kitagawa HO
    ARM SANGYO Iron raw nails for Kitagawa HO
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$87.99
    Min. 2 days
  12. Iron claw for Kitagawa scroll chuck
    ARM SANGYO Iron claw for Kitagawa scroll chuck
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$89.99
    Min. 2 days
  13. 3-jaw universal chuck
    PROXXON 3-jaw universal chuck
    Hole Diameter (Φmm)  10  Outer Diameter (Φmm)  49  Material  Iron  Mounting dimensions (mm)  Regular nail / Φ25, Reverse nail / Φ50  Suitable Model  Wood lace (No.27020) 
    Rating:
    100%
    from S$149.90
    Min. 2 days
  14. Iron raw nails for Kitagawa B
    ARM SANGYO Iron raw nails for Kitagawa B
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$86.99
    Min. 3 days
  15. 3 Jaws Scroll Chuck (Split Claw Type)
    Kobayashi Tekko 3 Jaws Scroll Chuck (Split Claw Type)
    Number of Jaws  3 claws 
    Rating:
    100%
    from S$1,299.00
    Min. 5 days
  16. Kitagawa raw nail (for scroll) SK
    IZS Kitagawa raw nail (for scroll) SK
    Material  S45C  Dimension E (mm) 
    Rating:
    53%
    from S$67.99
    Min. 2 days
  17. 3-jaw scroll chuck
    Mr. Meister 3-jaw scroll chuck
    Equivalent to the three-claw scroll chuck that comes standard with the Precision Mini Lathe Compact 3. Since the claws of this scroll chuck are reversible type, it can be used as a reverse claw or a normal claw by changing the claw replacement position.
    RoHS directive (corresponding to 10 substances)  Chuck Diameter D (Φmm)  50 
    from S$379.90
    Min. 2 days
  18. Hard Jaw
    Kitagawa Iron Works Hard Jaw
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$459.90
    Min. 2 days
  19. Scroll chuck integrated claw type / straight inlay
    Kitagawa Iron Works Scroll chuck integrated claw type / straight inlay
    Adoption of steel body Adoption of epoch-making steel body and cross guide The high rigidity design eliminates body distortion and realizes a dramatic extension of life.
    Maximum Operating Speed (min -1 [rpm])  2500  Type  One-piece nail 
    from S$1,199.00
    Min. 3 days
  20. Chuck mate (raw nail molding holder)
    Kawashimo Chuck mate (raw nail molding holder)
    Just insert three stop pins into the spot facing holes of the raw nail mounting holes and tighten the chuck (the tension chuck opens), and you're ready to go! Raw nail molding setup is completed within 1 minute. Center runout accuracy is improved within 10 microns and gripping power is also i... Read More
    from S$279.90
    Min. 2 days
  21. HO / HO Small Diameter
    GiGA SELECTION HO / HO Small Diameter
    Material  S45C 
    from S$46.99
    Min. 4 days
  22. Scroll chuck integrated claw type / straight inlay
    Kitagawa Iron Works Scroll chuck integrated claw type / straight inlay
    Adoption of steel body Adoption of epoch-making steel body and cross guide The high rigidity design eliminates body distortion and realizes a dramatic extension of life.
    from S$1,299.00
    Min. 3 days
  23. High Claw
    IZS High Claw
    It is a high claw of the chuck for Kitagawa ironworks. It is processed and used depending on the intended use.
    Dimension D (mm)  14  Dimension B (mm)  36  Dimension A (mm)  90  Dimension F (mm)  25  Material  S45C  Dimension E (mm)  Dimension G (mm)  45  Teeth Spacing  1.5 
    from S$109.90
    Min. 2 days
  24. Scroll Chuck Hard Jaw
    Kitagawa Iron Works Scroll Chuck Hard Jaw
    Dimension T6 (mm)  7.94  Maximum static Gripping Force (KN [kgf])  (31[3161])  Dimension T3 (mm)  40  Dimension T1 (mm)  80  Dimension T2 (mm)  28  Maximum Operating Speed (min -1 [rpm])  3500  Mass (kg)  13.4  Suitable for  HBS07C (hard nail)  Dimension T9 (mm)  40  Type  Split claw  Handle Torque (Nm [kgfm])  (107.9[11.0]) 
    from S$469.90
    Min. 2 days
  25. Iron claws for Nippon Steel
    ARM SANGYO Iron claws for Nippon Steel
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$86.99
    Min. 3 days
  26. Kitagawa high claw (for scroll)
    IZS Kitagawa high claw (for scroll)
    Material  S45C  Dimension E (mm) 
    from S$149.90
    Min. 4 days
  27. 4-jaw chuck
    PROXXON 4-jaw chuck
    For mounting irregularly shaped materials and eccentric processing
    RoHS directive (corresponding to 10 substances)  Correspondence  Material  Made of reinforced resin  Suitable Model  Wood Race DX (No.27020) 
    Rating:
    100%
    from S$87.99
    Min. 2 days
  28. T nut (Jaw nut) for Kitagawa
    GiGA SELECTION T nut (Jaw nut) for Kitagawa
    Hardness  HRC38  Material  SCM440 
    Rating:
    80%
    from S$97.99
    Min. 4 days
  29. 3 jaw scroll chuck Hard jaw type
    DI CHUN IRON WORK 3 jaw scroll chuck Hard jaw type
    from S$779.90
    Min. 4 days
  30. Howa's raw claws (hydraulic / pneumatic)
    IZS Howa's raw claws (hydraulic / pneumatic)
    Material  S45C 
    from S$49.99
    Min. 4 days
  31. HO22M/H27MA(HO37M)
    GiGA SELECTION HO22M/H27MA(HO37M)
    Material  S45C 
    from S$49.99
    Min. 4 days
  32. Raw nail forming jig Chuck assist ring
    Victor Raw nail forming jig Chuck assist ring
    Material  Steel 
    from S$389.90
    Min. 3 days
  33. Raw nail forming jig Chuck adjustable dummy
    Victor Raw nail forming jig Chuck adjustable dummy
    Material  Steel 
    from S$389.90
    Min. 3 days
  34. Jaw nut
    TRUSCO Jaw nut
    They tend to utilize a large number of chucks, such as pallet changers and work grippers. At that time, it takes too much time to replace the claws if the jawnuts are shared when changing the setup, so set the jawnuts on the next replacement claw in advance. By doing so, next time, you can replac... Read More
    Material  S45C 
    Rating:
    60%
    from S$139.90
    Min. 2 days
  35. B-200 / B-200 small diameter
    GiGA SELECTION B-200 / B-200 small diameter
    Cell Spacing (mm)  (Serration) 1.5 × 60 °  Material  S45C 
    from S$45.99
    Min. 4 days
  36. Chuck adjustable dummy for small diameter
    ZTEC Chuck adjustable dummy for small diameter
    The diameter of the work dummy can be adjusted as desired! No need to search for a suitable dummy! The molding accuracy of nails has improved dramatically.
    Thickness (mm)  13  Outer Diameter (Φmm)  30/35/40/45  Set Contents  AD30/35/40/45 
    from S$389.90
    Min. 5 days
  37. SBS-B scroll raw nail
    GiGA SELECTION SBS-B scroll raw nail
    Material  S45C 
    from S$64.99
    Min. 4 days
  38. Round raw nails for Kitagawa, Toyokazu, Matsumoto
    THECUT Round raw nails for Kitagawa, Toyokazu, Matsumoto
    from S$459.90
    Min. 4 days
  39. Chuck Adjustable Dummy Chuck AD
    ZTEC Chuck Adjustable Dummy Chuck AD
    The diameter of the work dummy can be adjusted as desired! No need to search for a suitable dummy! The molding accuracy of nails has improved dramatically.
    Outer Diameter (Φmm)  50/60/70/80/90  Thickness (mm)  13  Set Contents  AD50/60/70/80/90 
    from S$329.90
    Min. 5 days
  40. High claw for scroll chuck
    TRUSCO High claw for scroll chuck
    Material  S45C 
    Rating:
    100%
    from S$119.90
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 312

Set Ascending Direction