There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
Hole Diameter d (Φmm) 25.4 Outer Diameter D (Φmm) 75 Material MCO (cobalt High Speed Steel)
A metal saw with a special coating of titanium and aluminum that has "high hardness", "excellent abrasion resistance", "difficult to cause side welding", and is ideal for cutting stainless steel and alloy steel.
Cutting iron, stainless steel, non-ferrous metals, etc.... Read More
A metal saw with tough stickiness and rigidity made from carefully selected materials. Suitable for cutting general steel materials such as round bars, angles, and square pipes.
Cutting iron, stainless steel, non-ferrous metals, etc.
For stainless steel. Titanium special coating treatment has high hardness, excellent wear resistance, and side welding is unlikely to occur.
Stainless steel, iron, non-ferrous metals, etc.
Homo treatment for MCO tool cutting: Effective in preventing welding.
* Products with "Maruha" in the product number cannot be processed as they are because they are masters before the blade is attached. Please note that you need to attach the blade yourself.
Surface Treatment Homo processing product Abbreviation CMS
MCO tool: High speed steel with cobalt (MCO) is used as the material. MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9). Metal grooving and precision cutting * With key groove
6 types of work (R surface processing, curved surface processing, cutting processing, grooving processing, accurate grooving processing, rough cutting) can be done at will. Carbide blade can be used 360 °. Can be attached to a disc grinder with an outer diameter of 100 mm / 125 mm.
Shaving (rough... Read More
Outer Dia. x Inner Dia. (Φmm) 100×22 Appropriate number of revolutions (rev / min) 15000 / or less Hole Diameter (Φmm) 22 Number of Tips 4 Blade Thickness (mm) 8 Material (Blade) Carbide Material (Main Unit) Ordinary steel Included Accessories Torx wrench Material to be cut Wood / hardwood
A circular saw blade for cutting that uses MCO material (cobalt high-speed steel). Ideal for high-efficiency machining. Homo processing is applied.
Thickness T (mm) 2.0 Material MCO material (Cobalt high speed steel) Pin Hole (d3 x d2 x number) 50×9.0×2 Blade Diameter D (Φmm) 250 Surface Treatment Homo processing Hole Diameter d1 (Φmm) 32
Grooving of cast iron and steel Precision cutting of general metals
Keyway Corner Radius r (mm) 1.2 Outer Diameter D (Φmm) 150 Hole Diameter d (Φmm) 25.4 Keyway Depth E (mm) 28(+0.250) Keyway Width F (mm) 6.35(+0.31～+0.13) Number of Tips 68 Material MCO (cobalt High Speed Steel) Thickness Tolerance (mm) ±0.03
There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
Hole Diameter d (Φmm) 25.4 Outer Diameter D (Φmm) 75 Material MCO (cobalt High Speed Steel)
If the blade is worn, rotate the tip before use. Please purchase this new tip when you turn it 360 degrees and use it up.
Carbide Egli Cutter Replacement Tip and Screw
Suitable for For Aegli Cutter No.560 Set Contents 4 tips / screws
There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
Outer Diameter D (Φmm) 100 Hole Diameter d (Φmm) 25.4 Material MCO (cobalt High Speed Steel)
There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
Outer Diameter D (Φmm) 100 Hole Diameter d (Φmm) 25.4 Material MCO (cobalt High Speed Steel)
When using the Eguri Cutter series, set the safety protection cover / Proguard before use. You can reduce the scattering of wood chips during work. Can be attached to a 100 mm disc grinder with an auxiliary handle.
Protective cover to be attached to the Egli Cutter series
Suitable Tool Disc grinder Suitable for For Aegli Cutter No.560 Material (Main Unit) Resin
There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
Outer Diameter D (Φmm) 125 Hole Diameter d (Φmm) 25.4 Material MCO (cobalt High Speed Steel)
The most standard metal saw used for cutting general materials such as ordinary steel and carbon steel. For the first time in Japan, a homo treatment that applies a black oxide film to the surface of the saw blade is adopted. It helps the cooling effect of cutting oil, enhances the welding preven... Read More
Suitable Manufacturer For high-speed electric machines Material High speed tool steel (SKH-51)
A circular saw blade for cutting that uses MCO material (cobalt high-speed steel). Ideal for high-efficiency machining. Homo processing is applied.
Thickness T (mm) 3.0 Surface Treatment Homo processing Material MCO material (Cobalt high speed steel) Blade Diameter D (Φmm) 370 Pin Hole (d3 x d2 x number) 66×11×4 Hole Diameter d1 (Φmm) 45
Ideal for grooving and cutting MCO tools. Uses MCO material (cobalt high speed steel).
* Customers who have "Maruha" in the product number must cut the blade by themselves.
There are blades on the outer circumference, and blades are attached alternately on the sides and used for grooving. The material is MCO Cobalt Highs (equivalent to SKH55).
Outer Diameter (Φmm) 100 Hole Diameter (Φmm) 25.4 Material MCO3 (Cobalt high speed steel)
The most standard metal saw used for cutting general materials such as ordinary steel and carbon steel. For the first time in Japan, a homo treatment that applies a black oxide film to the surface of the saw blade is adopted. It helps the cooling effect of cutting oil, enhances the welding preven... Read More
Number of pinholes 2 Suitable Manufacturer For Hitachi Koki Material High speed tool steel (SKH-51)
Okazaki Seiko Metal SawGrooving of cast iron and steel Precision cutting of general metalsHole Diameter d (Φmm) 25.4 Outer Diameter D (Φmm) 75 Material MCO (cobalt High Speed Steel)
