Tool Bits
A bit is a type of cutting tool with a blade used in machine tools such as lathes and drill presses. Used by attaching to the machine tool. The shape varies greatly depending on the machine tool (lathe, milling machine, drilling machine, etc.) to be installed and the type of processing (outer rounding, facing, threading). Also, even if the shape is the same, the type of cutting tool used varies depending on the material of the material to be processed. If you use a tool that is not suitable for your application, the quality of the cut surface of the material will deteriorate, and the tool will be damaged by the heat during cutting, so care must be taken.
Other Related Pages
KOSHUHA PRECISION Blade with cutting toolMaterial MV10 JIS Standard 67S type RoHS directive (corresponding to 10 substances) Correspondencefrom S$119.90Min. 5 days-
-
- MonotaRO Completion byte Square byteThis is the point! 1. The base material is Swedish steel, which is said to be the best high-speed steel in the world. 2. It is said that heat treatment of Heiss is difficult, but it is performed at a heat treatment factory that specializes in Heiss and boasts a history of 50 years. 3. Polishing i... Read MoreMaterial SKH57
-
-
-
-
-
- Mr. Meister High speed solidMaterial Heiss Shank 8mm square RoHS directive (corresponding to 10 substances) Correspondence
-
-
- SANWA SEISAKUSHO (Sanwa Bits) Type 11 (hole drilling tool)Rough / general turning, flat cutting, shape cutting, copying lathe, millingJIS Standard Type 11
- SANWA SEISAKUSHO (Sanwa Bits) Carbide Blade Bit (Diligent Bit)It is a JIS standard product.
-
-
-
-
- SANWA SEISAKUSHO (Sanwa Bits) Carbide cutting tool (parting tool)Material M20 JIS Standard 43 type
- ASSAB Completion byteMade from Swedish pure high-speed steel, it is carefully hardened and tempered, and has a structure consisting of a uniform arrangement of extremely fine particles, resulting in extremely high hardness (HRC68-69) and machinability. It is a typical high-quality finished bite that demonstrates.Hardness HRC 68～69 RoHS directive (corresponding to 10 substances) Correspondence
- SANWA SEISAKUSHO (Sanwa Bits) Carbide blade (right single blade)Material K10 JIS Standard 33 type
-
- SUPER TOOL The Cutting BitFor grooving and parting off.Material High speed steel (SKH57) Hardness HRC66～68 JIS classification S type
-
- SAKAI MACHINE TOOL Parting Plate Bit Holder (Bit Holder)Use by inserting the parting plate bite.Suitable Model ML210、ML360
-
-
-
- TOKO Finishing Square Bits (inch)High Co, high V, molybdenum-based high-speed. Has excellent wear resistance.Material SKH57 equivalentfrom S$27.99Min. 2 days
-
- KOSHUHA PRECISION Board biteRoHS directive (corresponding to 10 substances) Correspondence
- ASSAB Complete BitMade from Swedish pure high-speed steel, it is carefully hardened and tempered, and has a structure consisting of a uniform arrangement of extremely fine particles, resulting in extremely high hardness (HRC68-69) and machinability. It is a typical high-quality finished bite that demonstrates.RoHS directive (corresponding to 10 substances) Correspondence
- SANWA SEISAKUSHO (Sanwa Bits) Carbide blade (right single blade)Material M20 JIS Standard 33 typefrom S$29.99Min. 2 days
-
- KOSHUHA PRECISION Tapping tool 42 type hole turning tool for turningThe steel type of the blade is for turning (NK-4 steel type), and the one that is most suitable for each cutting condition is used. It is a JIS standard product.JIS Standard 42 type Hardness HRC (Blade) 64～67 Material (Tip) NK4 Material (Shank) S55Cfrom S$64.99Min. 2 days
- SANWA SEISAKUSHO (Sanwa Bits) Blade with cutting edgeIt uses a material that has better high-temperature hardness and wear resistance than conventional high-speed steel.
- SUPER TOOL Stick tool holder set (with stick tool)A set of holder and bite. Since the holder is a hail type, the shock given to the bite can be softened. For grooving and parting off.
- HICUT Type 37 (Right Sumibite)Right or Left Hand Right JIS Standard 37 type
- Mr. Meister [General purpose] Carbide slotted parting tool 8mm squareCarbide slot air bite for parting off, ideal for cutting workpieces and grooving. A cutting tool with replaceable inserts designed for small lathes. The shank is 8 mm square and can be used with most models in the Mr. Meister / Small Machine Tool series. If the parting tip is also worn, the tip c... Read MoreMaterial (Chip) Carbide Shape (Chip) box Shank 8mm square RoHS directive (corresponding to 10 substances) Correspondencefrom S$159.90Min. 2 days
- KOSHUHA PRECISION Cutting tool 52 type hole threading tool for turningThe steel type of the blade is for turning (NK-4 steel type), and the one that is most suitable for each cutting condition is used. It is a JIS standard product.Suitable Model lathe JIS Standard 52 type Hardness HRC (Blade) 64～67 Material (Tip) NK4 Material (Shank) S55Cfrom S$53.99Min. 2 days
![[General purpose] Carbide slotted parting tool 8mm square](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono48909735-161222-02.jpg)
