End Mills
An end mill is a cutting tool used to smoothly cut the surface of parts such as metal and plastic. There are many types of end mills, and they are classified into many types according to the number of cutting edges and the cutting length. Although there are differences depending on the cutting method, a two-blade end mill is used for general cutting operations. A multi-blade end mill is suitable for cutting narrow parts such as side cuts. The appropriate blade length will vary depending on the depth of cut. Use caution when using a blade length that is too long, as vibration will occur and it will not be cut well.
Other Related Pages
MonotaRO High-speed Steel Square End Mill Short 4-BLade Center CutA high-speed end mill suitable for side machining and finishing. Carbon steel, alloy steel, cast iron, aluminum alloy * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～+0.03 Number of Tips 4 Material Cobalt high speed steel Shank Diameter Tolerance (mm) h6- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2.5D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Material Cemented carbide Type Cutting edge gash pad Cutting Edge Shape Cutting edge gash pad
- MonotaRO Square High-Speed Steel End Mill, Short, 2-FluteSuitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Helix Angle (°) 30 Shank Diameter Tolerance (mm) h6
- MonotaRO Carbide Square End Mill TiAlN Coated 4-flute 2.5D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Number of Tips 4 Material Cemented carbide Type Cutting edge gash pad Surface Treatment TiAIN
- MonotaRO Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cadTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Material Cemented carbide Surface Treatment TiAlN Cutting Edge Shape Tip pin type Type Tip pin type
- MonotaRO High-speed square end mill, long, 4-flute, center cutSuitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～+0.03 Helix Angle (°) 30 Number of Tips 4
- MonotaRO High-speed ball end mill, 2-flute* Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.030 Number of Tips 2 Helix Angle (°) 30
- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Maximum Drilling Capacity 2D Helix Angle (°) 30 Material Cemented carbide Type Cutting edge gash pad Surface Treatment TiAlN
- SANKO MFG 4 Blade Long Blade End Mill* For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.Dimension Tolerance (mm) +0.03～0 Helix Angle (°) 30 Number of Tips 4
- NACHI (NACHI-FUJIKOSHI) SG-FAX Roughing end mill Fine pitch shortSG coating is applied to powdered highs to enable high-efficiency machining like carbide. Lifespan is more than 3 times that of conventional products. Supports from mold steel to difficult-to-cut materials. Carbon steel, alloy steel, pre-hardened steel, die steel, heat resistant alloy, cast iron,... Read MoreSurface Treatment SG (TiCN) coating Helix Angle Standard Tolerance (μm) ±100from S$99.90Min. 4 days
- SANKO MFG 4-flute regular blade end mill* For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.Number of Tips 4 Material Cobalt high speed (HS-Co)from S$29.99Min. 4 days
- SANKO MFG 2-Flute Ball End Mill Regular BladeNumber of Tips 2 Material High cobalt high speed (SKH57)from S$56.99Min. 109 days
- SANKO MFG 2-flute ball end mill short blade* For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.Tolerance for Ball Endmill Radius (mm) 0～-0.03 Number of Tips 2 Helix Angle (°) 30 Shank Diameter (Φmm) 6 Material Cobalt high speed HS-Cofrom S$49.99Min. 4 days
- Zhuzhou Tools Carbide Square End Mill, 2-Flute For Aluminum ProcessingSide processing, shoulder cutting, groovingNumber of Tips 2 Helix Angle (°) 55 Applicable Workpiece Materials Aluminum: ◎ Material Carbide Surface Treatment Non-coatedfrom S$12.99Min. 6 days
- MOLDINO (Former Hitachi Tool) Carbide / C coated 2-flute end mill (long blade length)Number of Tips 2 Helix Angle (°) 30 Surface Treatment C coat Material Carbide (CARBIDE) Specification Medium finishing and finishing Shank Diameter Tolerance (mm) h6from S$119.90Min. 3 days
- SANKO MFG Estec Muscle 3-Flute End Mill Regular BladeUses high-grade powder highs. The original blade mold enables from heavy cutting to finishing.Outer Diameter Tolerance (mm) 0～-0.03 Number of Tips 3 Helix Angle (°) 50 Material High-class powder HSS (STEC)from S$46.99Min. 182 days
- NACHI (NACHI-FUJIKOSHI) Super hard long end mill 4-fluteA general-purpose end mill that can process copper, stainless steel, and aluminum. Suitable for wide side surface and deep side surface processing.Number of Tips 4 Helix Angle Standard Shank Diameter Tolerance (mm) h7from S$48.99Min. 4 days
- ESCO 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)Blade Length (mm) 12 Blade Diameter (Φmm) 4 Number of Tips 4 Overall Length (mm) 60 Shank Diameter (Φmm) 8 Material Cobalt heiss Esco Part No. EA824RB-4.0 Surface Treatment TiN coatfrom S$54.99Min. 6 days
- Mitsubishi Materials RadiuscutterRadius cutter for high feed. Stable cutting is possible with a strong tip clamp. Coolant holes are standard equipment on both urban and shank types.from S$359.90Min. 4 days
- SANKO MFG N coating REα nick end mill 3D typeAdopting a new surface treatment "N coating", it achieves a long life of 1.8 times or more compared to general products. Four types of blade lengths are available to suit your needs.Helix Angle (°) 30 Material Cobalt high speed (HS-Co) Surface Treatment N coatingfrom S$87.99Min. 4 days
- Fukuda Seiko (FKD) 3S end mill 6 blades special long blade 6XLFShank Diameter (Φmm) 42 Number of Tips 6 Material HSS-Co(SKH56)from S$1,899.00Min. 5 days
- EMUGE Top cut series Composite multilayer coating AlTinUniversal end mill boasting ease of use and high cutting performance We do not choose opponents (workpieces) from steel, carbon steel, stainless steel, cast iron to difficult-to-cut materials such as titanium alloys and heat-resistant alloys, and high-hardness steel up to HRC55. Suppresses chatte... Read MoreNumber of Tips 4 Material Carbide Surface Treatment TiAlNfrom S$86.99Min. 4 days
- ISCAR D Solid end mill COATCarbide ball end mill Medium to finish processing in milling processing ※The image is an image.from S$87.99Min. 3 days
- SANKO MFG DLC coated carbide end millBlade Diameter (Φmm) 1.5 Number of Tips 2 Blade Length (mm) 4 Shank Diameter (Φmm) 4 Overall Length (mm) 40 Surface Treatment DL (DLC) coating Material Ultra fine grain cemented carbide (MGC)from S$58.99Min. 4 days
- Mitsubishi Materials Throwaway end mill* If you order by cash on delivery, it may be shipped the next day or later.from S$389.90Min. 5 days
- MonotaRO Carbide Square End Mill TiAlN Coated 4-Flute Gash Strong TwistBy adjusting the twist of the blade to 45 °, it is possible to cut high hardness materials and high feed machining, and the rigidity is also increased. In addition, it can be machined for a long time and the cut surface is finished cleanly. * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.02 Number of Tips 4 Helix Angle (°) 45 Material Cemented carbide Cutting Edge Shape Gouache guess Surface Treatment TiAlN
- MonotaRO Carbide Long Neck Square End Mill TiAlN Coat 2 FluteTool interference during deep engraving can be avoided. * Please use protective goggles when working as there is a risk of damage. * Do not touch the cutting edge with your bare hands. * Be careful not to get injured by scattering chips or wrapping.Blade Diameter Tolerance (mm) 0～-0.02 Neck angle (°) 15 Number of Tips 2 Helix Angle (°) 30 Material Carbide Surface Treatment TiAlN Shank Diameter Tolerance h6
- MonotaRO Carbide Square End Mill TiAlN Coated 4-Flute 2.5D PincadTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Maximum Drilling Capacity 2.5D Helix Angle (°) 30 Number of Tips 4 Material Cemented carbide Surface Treatment TiAIN Type Tip pin type
- MonotaRO Carbide Ball End Mill TiAlN Coat 2 Flute* Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.030 Number of Tips 2 Helix Angle (°) 30 Surface Treatment TiAIN Coating TiAlN
- MAKINO BSK end mill caseWith an adjuster mechanism, it can be adjusted according to the length of the stored items. Because it is transparent, you can see the inside well. The durable case protects the stored items. As a tool case for drills, etc., for managing small itemsNumber of Storage (pieces) 1 Specification Body, lid set
- MonotaRO High sluffing end mill, short, 4-flute* Do not use for anything other than its intended purpose.Helix Angle (°) 30 Number of Tips 4 Material Cobalt high speed steel
- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2D PincadTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Maximum Drilling Capacity 2D Helix Angle (°) 30 Material Cemented carbide Surface Treatment TiAlN Type Tip pin type
- MonotaRO Carbide End Mill for ResinBy manufacturing with an end mill using a fine-grained whetstone, the surface accuracy of the resin machined surface can be finely finished, and it can also be used for aluminum processing. Processing of resin, aluminum, etc. * Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.02 Number of Tips 2 Helix Angle (°) 30 Material Cemented carbide Tip Shape Pinkado
- MAKINO BSK end mill drill caseWith an adjuster mechanism, it can be adjusted according to the length of the stored items. Because it is transparent, you can see the inside well. The durable case protects the stored items. As a tool case for end mills and drills. For managing small items.Number of Storage (pieces) 1 Specification Body, lid set Material Polypropylene (PP)
- MonotaRO Carbide long neck ball end mill, AlCrN coated, 2-fluteMade by a safe domestic manufacturer. Abrasion resistance is improved by using AlCrN coating. Since it is a deep rib type, tool interference during deep engraving can be avoided. For deep carving. * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any... Read MoreNumber of Tips 2 blades Helix Angle 30θ Surface Treatment AlCrN coating Material Carbide
- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 3D GashTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Helix Angle (°) 30 Maximum Drilling Capacity 3D Material Cemented carbide Type Cutting edge gash pad Surface Treatment TiAlN
- MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 3D PincadTiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read MoreBlade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Helix Angle (°) 30 Maximum Drilling Capacity 3D Material Cemented carbide Surface Treatment TiAlN Type Tip pin type
- TCT Japan Micro Carbide End MillsCarbide 2-flute square end mill with excellent wear resistance. A sharp edge design has been achieved with a unique cutting edge design. Suitable for processing a wide variety of work materials such as non-ferrous metals, plastics, resins, carbon fibers, wood, paper, concrete and glass.Shank Diameter (Φmm) 3.175 Overall Length (mm) 38.1 RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO High-speed end mill for aluminum, short, 2-flute* Do not use for anything other than its intended purpose.Blade Diameter Tolerance (mm) 0～-0.03 Number of Tips 2 Helix Angle (°) 42 Shank Diameter Tolerance (mm) h6
- Mitsubishi Materials 2-Flute MSTAR End Mill (M)A unique coating that applies miracle coating technology. General-purpose 2-flute square end mill General purpose * If you order by cash on delivery, it may be shipped the next day or later.Number of Tips 2 Helix Angle (°) 30 Surface Treatment MS coating Cutting Edge Shape Pinkado Shape Square Material Ultra fine particle carbide
