All Category

Cutting Tools / Abrasives

View : Grid List
Filter

Items 1 - 40 of 62287

Set Ascending Direction
  1. Waterproof Sandpaper
    MonotaRO Waterproof Sandpaper
    It can be used for woodworking, metal, vehicle bases, finish polishing, and plastic polishing. Water sharpening and empty sharpening are possible with a light force. For polishing metal, wood, plastic, pottery, etc. * Do not use for any other purpose.
    Color  (Base material) Brown, (Abrasive) Black  Sheet Size (mm)  230×280  Base Material  Kraft paper CW  Suitable Material  Metal, wood, plastic, pottery  Shape  Sheet type  Abrasive  Silicon carbide 
    Rating:
    88%
    from S$2.39
    Min. 2 days
  2. Cutting Wheel Kin no Tamago
    Resiton Cutting Wheel Kin no Tamago
    Instant cutting, ideal for stainless steel! Bali is not burnt! For cutting stainless steel and metal * Be sure to attach the grindstone cover before use. * Please wear protective goggles and a dust mask. * Please use at the maximum operating peripheral speed or less. * Use an appropriate flange. ... Read More
    Maximum Operating Peripheral Speed (m / min)  80[4800]  Abrasive Grain  AZ (aluminum oxide-zirconia)  Series  Golden egg  Main Materials, to Cut  Stainless steel/metal 
    Rating:
    93%
    from S$4.39
    Min. 2 days
  3. Abrasive disc Alumina
    MonotaRO Abrasive disc Alumina
    Uses an alumina abrasive, which is a base cloth with a high self-sustaining action (the blunted polished surface is replaced with a new one). It boasts high grinding power and grinding speed. You can work efficiently under light to moderate pressure. For deburring, rust removal, scratch removal, ... Read More
    Outer Diameter (Φmm)  100  Maximum Operating Speed (min -1 [rpm])  13600  Hole Diameter (Φmm)  15  Abrasive  Alumina  Suitable for  Disc Grander  Suitable Material  Iron etc.  Suitable Tool  grinder  Abrasive Structure  sandpaper 
    Rating:
    91%
    from S$2.19
    Min. 2 days
  4. Abrasive Belt Alumina Width 10Mm Length 330Mm
    MonotaRO Abrasive Belt Alumina Width 10Mm Length 330Mm
    It is ideal for deburring, grinding, and polishing metal by attaching it to the belt sander of electric and air tools. * Do not use for anything other than its intended purpose.
    Belt Width (mm)  10  Dimension (mm)  10×330  Belt Length (mm)  330  Abrasive  Alumina  Suitable Material  Metal 
    Rating:
    74%
    from S$7.69
    Min. 2 days
  5. Channel brush J type
    MonotaRO Channel brush J type
    Since the J type has a bent tip, it can be used even in places where cleaning is difficult, such as corners. * Do not use for any purpose other than its intended purpose.
    Head Shape  J type  Material (Handle)  Steel 
    Rating:
    76%
    from S$3.29
    Min. 2 days
  6. Scotch Brite Industrial Pad 7447
    3M Scotch Brite Industrial Pad 7447
    It is a polishing pad that has a track record of nearly 40 years as a product made in Japan and has been supported by many people. With a high repeat rate, it has outstanding reliability and a sense of security. It is a standard product used for all purposes such as rust removal. Rust removal Scr... Read More
    Abrasive Grain Size  #320  Dimension (mm)  150×230  Abrasive  A (aluminum oxide)  Color  Red tea  Grade  VF 
    Rating:
    96%
    from S$3.99
    Min. 2 days
  7. Sponge Abrasive
    3M Sponge Abrasive
    Flexibility that fits well on curved surfaces, and familiarity due to the cushioning effect. It is hard to get clogged and can be washed with water. An elastic abrasive made by applying and adhering abrasive particles to a sponge with moderate elasticity. Excellent polishing ability. Finish polis... Read More
    Dimension (mm)  114×140  Thickness (mm)  Abrasive  A (aluminum oxide)  Suitable Material  Wood, plastic, pottery, metal, etc. 
    Rating:
    92%
    from S$3.59
    Min. 2 days
  8. Hex Axis Drill & Step Drill Set TiN Coat
    MonotaRO Hex Axis Drill & Step Drill Set TiN Coat
    Excellent bite to the material due to the cross-thinning process at the tip (3 mm or more). With a step bit that is convenient for drilling curved surfaces such as pipes. * Please use protective goggles when working as there is a risk of damage. * Do not touch the cutting edge with your bare hand... Read More
    Tip Angle (°)  118  Shank Diameter (Φmm)  6.35  Material  High speed steel (HSS)  Helix Angle  Standard  Surface Treatment  TiN coating  Drill Thinning Shape  X-type thinning (Φ3mm or more) 
    Rating:
    82%
    from S$21.99
    Min. 2 days
  9. Brass Brush with Handle
    MonotaRO Brass Brush with Handle
    Since the brass wire is soft, it is suitable for glazing work. For glazing work / polishing * Depending on the object to be polished, its performance may not be fully exhibited. Work so that you do not hit the ends of your hair strongly.
    Dimension C (mm)  235  Mass (g)  35  Dimension A (mm)  15  Material (Brush Part)  Brass 
    Rating:
    89%
    from S$1.99
    Min. 2 days
  10. SKS Hand Tap
    Hayasaka Mfg. SKS Hand Tap
    It is a general tap and is used in all directions. For 3rd grade gauge
    Material  Alloy tool steel (SKS)  Type of Thread  Shape  M6 and below are protruding centers 
    Rating:
    93%
    from S$3.29
    Min. 2 days
  11. Bimetal Hole Saw
    NICOTEC Bimetal Hole Saw
    The cutting edge of high-grade high-grade (M42) and tough spring steel are welded with an electron beam to achieve high cutting performance that could not be achieved with conventional solid hole saws. By adopting a combination pitch, vibration during drilling is suppressed and highly accurate ma... Read More
    Effective Cutting Capacity (mm)  3.2  Drill Diameter (Φmm)  Suitable Tool  Electric drill, drilling machine  Number of Tips  Unequal (4/6) 
    Rating:
    85%
    from S$25.99
    Min. 2 days
  12. Cutting Wheel Super Cut RSC
    NIPPON RESIBON Cutting Wheel Super Cut RSC
    Bringing together technical capabilities and know-how. A high-performance cutting wheel with greatly improved work efficiency. A cutting wheel for metals that uses cubicron abrasive grains. It enables sharpness that is nearly twice that of conventional products. Resibon's epoch-making cutting... Read More
    Rating:
    94%
    from S$4.19
    Min. 2 days
  13. TiN Coated Straight Drills Set
    MonotaRO TiN Coated Straight Drills Set
    By applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.3 mm. Achieves improved processing speed by adopting titanium coating. * Please use protective goggles when working as there is a risk of damage. * Do no... Read More
    Tip Angle (°)  118  Material  High speed steel (HSS)  Helix Angle  Standard  Surface Treatment  TiN coating  Drill Thinning Shape  X-type thinning (Φ3mm or more) 
    Rating:
    82%
    from S$11.99
    Min. 2 days
  14. High-speed Steel Square End Mill Short 4-BLade Center Cut
    MonotaRO High-speed Steel Square End Mill Short 4-BLade Center Cut
    A high-speed end mill suitable for side machining and finishing. Carbon steel, alloy steel, cast iron, aluminum alloy * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~+0.03  Number of Tips  Material  Cobalt high speed steel  Shank Diameter Tolerance  h6 
    Rating:
    90%
    from S$12.99
    Min. 2 days
  15. Super Green
    NEW REGISTON Super Green
    Flexible grindstone for light grinding / polishing Since no pad can be used for grinding / polishing, there is no need to use a pad. An almighty whetstone that does not require different whetstones depending on the type of steel material. Grindability is improved because there is little clogging,... Read More
    Series  Super green 
    Rating:
    91%
    from S$3.19
    Min. 2 days
  16. Saver saw blade
    MonotaRO Saver saw blade
    Pipes can also be cut For metal * Do not use for anything other than its intended purpose.
    Blade Thickness (mm)  0.9 
    Rating:
    84%
    from S$23.99
    Min. 2 days
  17. Cutting Wheel Double-Side Reinforcement AHX Outer Diameter 106mm X Thickness 1.0mm / 1.2mm Non-Slip Type
    MonotaRO Cutting Wheel Double-Side Reinforcement AHX Outer Diameter 106mm X Thickness 1.0mm / 1.2mm Non-Slip Type
    Since it is an integrated flange, it can be firmly fixed and does not slip easily! Wave cut, safe, fast cut, long lasting! By reviewing the composition of the abrasive material, the sharpness and durability have been further improved. Stainless steel, for ironwork, angles, round bars, thin steel ... Read More
    Thickness (mm)  1.0/1.2  Outer Diameter (Φmm)  106  Maximum Operating Speed (min -1 [rpm])  14400  Hole Diameter (Φmm)  15  Abrasive Grain Size  60  Maximum Operating Peripheral Speed (m / min)  80[4800]  Abrasive  AHX  Binder  B/F  Color  Black  Suitable Tool  Disc grinder  Specification  Double-sided reinforcement  Hardness 
    Rating:
    90%
    from S$2.59
    Min. 2 days
  18. Impact Hole Saw
    NICOTEC Impact Hole Saw
    Hole sawing can be performed with an impact driver. It can also be used with a cordless drill driver with general drill chuck specifications or an electric drill. A low power consumption, low torque type hole saw. Achieves powerful machining with a tough hexagonal shaft and a tough and unrivaled ... Read More
    Effective Length (mm)  12.5  Shape of Shank  Hex axis  Suitable Thickness of Workpiece (mm)  1.6  Teeth Spacing  Shank  Hex axis 6.35mm  Hex Shank across Flats  6.35 
    Rating:
    86%
    from S$29.99
    Min. 2 days
  19. Hexagonal Spiral Tap
    MonotaRO Hexagonal Spiral Tap
    It can be attached to an electric drill with a forward / reverse switching function, and screw holes can be easily machined. The spiral shape allows chips to be discharged upward, making it suitable for blind hole drilling. For threading blind holes. * Do not use for any purpose other than its in... Read More
    Hex Width Across (mm)  6.35  Type of Thread 
    Rating:
    83%
    from S$9.79
    Min. 2 days
  20. Drills Set for Stainless Steel
    MonotaRO Drills Set for Stainless Steel
    Uses cobalt high-speed steel, making it ideal for processing stainless steel. By applying X-shaped thinning processing (3 mm or more) to the cutting edge, outstanding bite and sharpness are achieved. Center runout range 0.3 mm. * Please use protective goggles when working as there is a risk of da... Read More
    Drill Thinning Shape  X type thinning  Material  Cobalt high-speed steel (HSS Co)  Tip Angle (°)  135  Helix Angle  Strong twist 
    Rating:
    81%
    from S$7.89
    Min. 2 days
  21. Wheel Wire Brush with Shaft
    MonotaRO Wheel Wire Brush with Shaft
    Since it is wheel-shaped, it is convenient for work in narrow areas such as grooves. For rust removal work. For deburring work. * Be sure to use safety protective equipment (glasses, mask, gloves, etc.) during work. * Please use at the maximum rotation speed or less. * Since it is a wire processe... Read More
    Thickness (mm)  12  Maximum Operating Speed (min -1 [rpm])  20000  Shaft Length (mm)  30  Shank Diameter (Φmm) 
    Rating:
    86%
    from S$3.79
    Min. 2 days
  22. Short Drill Bit with Threaded Tip for Woodworking
    MonotaRO Short Drill Bit with Threaded Tip for Woodworking
    Ideal for drilling holes in boards and boards, the tip of the drill is a tip screw type, so smooth drilling is possible without pressing. General wood * Do not use for anything other than its intended purpose.
    Shank Diameter (Φmm)  6.35  Material  S45C  Tip Shape  Tip thread type 
    Rating:
    79%
    from S$5.19
    Min. 2 days
  23. Super Green Sigma
    NEW REGISTON Super Green Sigma
    The offset whetstone changes with this one piece. No inventory is required for each abrasive material, particle size, or hardness. Any steel material. Suitable for both general steel and stainless steel. Eliminates the need to stock multiple types. Flexible with performance higher than offset. A ... Read More
    Abrasive Grain Size  36  Maximum Operating Peripheral Speed (m / min)  72[4300]  Series  Super green 
    Rating:
    90%
    from S$3.49
    Min. 2 days
  24. Carbide Square End Mill TiAlN Coated 2-Flute 2.5D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 2-Flute 2.5D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Material  Cemented carbide  Type  Cutting edge gash pad  Cutting Edge Shape  Cutting edge gash pad  Coating  TiAlN 
    Rating:
    92%
    from S$11.99
    Min. 2 days
  25. Carbide Hole Saw 278
    MIYANAGA Carbide Hole Saw 278
    Sharpness for cutting from steel plate, stainless steel plate to synthetic resin plate. Compared to the high-speed blade, a high-speed electric motor can be used, enabling speedy drilling. For drilling holes in steel plates, stainless steel plates, copper plates, aluminum plates, etc. up to a pla... Read More
    Effective Length (mm)  Compatible Motor  Electric drill (use only for rotation) 
    Rating:
    86%
    from S$46.99
    Min. 2 days
  26. Diamond File for Smooth Work Set
    MonotaRO Diamond File for Smooth Work Set
    * Do not use for anything other than its intended purpose.
    Overall Length (mm)  140  Length of File Part (mm)  50  Suitable Material  Ironworker, ceramic, glass, etc. 
    Rating:
    77%
    from S$17.99
    Min. 2 days
  27. Cermet tip saw for both iron and stainless steel
    MonotaRO Cermet tip saw for both iron and stainless steel
    Iron / stainless steel combined type. The cutting edge uses a cemented carbide cermet tip that is resistant to chipping and wear. Clean cut with less sparks and dust when cutting. Quick cutting leaves no burns, burrs or burrs. Angle steel, graching, round / square pipe, PVC pipe, channel steel, C... Read More
    Suitable Material  Iron・ stainless steel 
    Rating:
    84%
    from S$34.99
    Min. 2 days
  28. Electroplated Diamond Bar
    MonotaRO Electroplated Diamond Bar
    Excellent grinding power due to the large amount of abrasive grains protruding. Suitable for rough machining, small diameter hole drilling, and grinding finish machining of dies and jigs. Ideal for non-ferrous metals such as cemented carbide, ceramics, stones, glass, rubber, silicon, plastics, FR... Read More
    Shank Diameter (Φmm)  Overall Length (mm)  45 
    Rating:
    87%
    from S$5.69
    Min. 2 days
  29. Scotch Bright Industrial Pad 7448
    3M Scotch Bright Industrial Pad 7448
    This is the type that gives the finest finish among the pads. It is used for finishing nameplates, finishing electronic parts before plating, matting wood-painted surfaces, and blurring scratches on stainless steel, aluminum, and copper. Extra fine finish
    Abrasive Grain Size  #800  Trusco Part No.  126-6390  Dimension (mm)  150×230  Color  Gray  Abrasive  S (silicon carbide)  Grade  UF 
    Rating:
    92%
    from S$3.89
    Min. 2 days
  30. Magnetic Drilling Machine Cutter
    MonotaRO Magnetic Drilling Machine Cutter
    You can work efficiently by improving the drilling speed without the need for pilot holes. It is possible to drill holes up to a thickness of 35 mm. For drilling holes in steel plates, shaped steel, stainless steel, cast iron, etc. * Do not use for any purpose other than its intended purpose. * P... Read More
    Effective Length (mm)  35  Overall Length (mm)  74  Applicable Workpiece Materials  Mild steel, stainless steel  Shank size (mm)  Φ19.05×L23 
    Rating:
    96%
    from S$66.99
    Min. 2 days
  31. Nice Men G (Chamfering Cutter)
    TRUSCO Nice Men G (Chamfering Cutter)
    Longer life due to titanium coating. Beautiful surface finish without chattering. Smooth surface finish with a single blade.
    Chamfer Angle  90°  Blade Shape  Others  Material  SKH-51 (High Speed) 
    Rating:
    62%
    from S$39.99
    Min. 2 days
  32. Reinforcement of 1 cutting wheel A Diameter 100mm x Thickness 2.0mm
    MonotaRO Reinforcement of 1 cutting wheel A Diameter 100mm x Thickness 2.0mm
    Excellent cost performance and sharp sharpness! * Avoid using the product in excess of the maximum peripheral speed and avoid impact on the grindstone. * Be sure to use the grindstone cover and protective equipment. * Please install the grindstone correctly. * Please use the proper flange. * Do n... Read More
    Specification  1 sheet reinforcement  Outer Diameter (Φmm)  100  Hole Diameter (Φmm)  15  Thickness (mm)  Abrasive Grain Size  46  Maximum Peripheral Speed (m/s)  72  Abrasive  Alumina  Binder  BF  Hardness 
    Rating:
    83%
    from S$8.99
    Min. 2 days
  33. Square High-Speed Steel End Mill, Short, 2-Flute
    MonotaRO Square High-Speed Steel End Mill, Short, 2-Flute
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter Tolerance  h6 
    Rating:
    92%
    from S$13.99
    Min. 2 days
  34. Regular-use Vito Grindstone WA Red No.1
    Noritake Regular-use Vito Grindstone WA Red No.1
    Since it is an abrasive grain with high hardness and good crushability, it is ideal for work that avoids grinding burns such as general light grinding, precision grinding, and tool grinding. Hardened carbon steel, alloy steel, tool steel, etc. (SxxC, SCr, SK, SKS).
    Peripheral Speed (m/s [m/min])  (Whetstone) 40  Shape  No. 1 (flat type)  Suitable Material  SC, sCr, sK, sKS, etc.  Binder  V36R  Abrasive Grain  WA  Abrasive  WA red 
    Rating:
    93%
    from S$13.99
    Min. 2 days
  35. King Deluxe Whetstone
    KING King Deluxe Whetstone
    This product was developed as a grindstone for medium sharpening of all types of blades. Since it is manufactured with a special abrasive material, the quality is permanent, it takes a short time, and it has a sharp blade with sharpness, which improves work efficiency. For rough sharpening (grain... Read More
    Dimension (mm)  207 x 66 x 34 (whetstone only)  Material  Special abrasive 
    Rating:
    98%
    from S$29.99
    Min. 2 days
  36. Regular-use Vito Whetstone GC No.1
    Noritake Regular-use Vito Whetstone GC No.1
    It is made of silicon carbide, has a very high hardness, and has good crushability, so it exhibits excellent sharpness. Non-ferrous and non-metals such as cemented carbide, ceramics, copper and aluminum.
    Abrasive  GC  Shape  No. 1 (flat type)  Binder  V81R 
    Rating:
    85%
    from S$21.99
    Min. 2 days
  37. SDS Plus Bit S4L
    BOSCH SDS Plus Bit S4L
    [SDS Plus Bit S4L] Greatly improved efficiency in drilling concrete! ● Strength is increased with a new shape tip! Reinforcing bar performance and deck plate performance have been improved. ● Drilling speed increased by about 25%! (Compared to our conventional products) ● Lifespan is increased by... Read More
    Rating:
    88%
    from S$9.59
    Min. 2 days
  38. Metal Master (Powder Titanium Tip Saw)
    YAMASHIN SEIKYO (YAMASHIN) Metal Master (Powder Titanium Tip Saw)
    A newly developed material powder titanium tip is used for the cutting edge. General mild steel, striped steel plate, angle, channel steel, deck plate, keystone plate, lining pipe, VLP pipe, conduit pipe, PVC pipe, stainless steel
    Blade Thickness (mm)  1.6  Hole Diameter (Φmm)  20  Material  Iron (SK material) 
    Rating:
    79%
    from S$43.99
    Min. 2 days
  39. Carbide Square End Mill TiAlN Coated 4-flute 2.5D Gash
    MonotaRO Carbide Square End Mill TiAlN Coated 4-flute 2.5D Gash
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. Because it is a gash type, it has high cutting edge strength and excellent chipping resistance. * ... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Number of Tips  Material  Cemented carbide  Type  Cutting edge gash pad  Surface Treatment  TiAIN  Coating  TiAlN 
    Rating:
    89%
    from S$18.99
    Min. 2 days
  40. Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cad
    MonotaRO Carbide square end mill, TiAlN coated, 2-flute 2.5D pin cad
    TiAlN coating is a coating with excellent heat resistance and is suitable for medium and high speed cutting of alloy steel, austenitic steel, etc., and for machining castings and non-ferrous metals. The cutting edge is sharp and the processing accuracy is good, making it suitable for precision fi... Read More
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Maximum Drilling Capacity  2.5D  Helix Angle (°)  30  Material  Cemented carbide  Coating  TiAlN  Type  Tip pin type  Cutting Edge Shape  Tip pin type 
    Rating:
    85%
    from S$11.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 62287

Set Ascending Direction
Filter by categories