Safety Boots
Other Related Pages
- MonotaRO Safety Boots with CoverSafety boots with steel toecap. Since the inner material is made of sweat-absorbent material, it relieves discomfort caused by sweat. * Regarding water absorption and quick-drying, a part of the original fabric is used as our standard, and it is within 8 seconds based on the water absorption JIS ... Read MoreFoot Width 3E Length (cm) About 36.5 (26cm) Standard Mass (grams per one foot) About 830 (26cm) Type of Shoes Boots Shape High cut Material (Cover) PVC Function Quick drying Material (Upper) Rubber Material (Sole) Rubber Type With cover Material (Toe Protector) Steel Material (Inner Lining) Sweat-ABSorbing knitted fabric
- MIDORI ANZEN Safety boots MPB-7700With a hood, it prevents water and dust from entering the inside of the boots. Not only safety and functionality, but also design creates a work scene.Standard Mass (grams per one foot) 1000 Mass (kg) 2 Length (cm) 40 Color Black Grey Type of Shoes Boots Foot Width EEE Shape High cut Type Safety boots Specification With hood
- MIDORI ANZEN Safety Boots (Short Type) MPB-185The short length makes it easy to move. Not only safety and functionality, but also design creates a work scene.Standard Mass (grams per one foot) 750(L) Color Blue / grey Foot Width EEE Type of Shoes Half boots Shape Middle cut Type Safety shoes Material (Toe Protector) Steel Material (Upper) Synthetic rubber Material (Sole) Synthetic rubber Specification With hood
- XEBEC Short length safety boots 85711The short length makes it easy to wear and move. The deeply carved rubber sole makes it hard to slip and is safe. Hard and light steel toecap. By using a sweat-absorbing dry fabric for the inner, stuffiness in the shoes is reduced. With a thick body design that can be worn comfortably, it is also... Read MoreMass (g / leg) 1640(M) Foot Width 3E Type of Shoes Half boots Shape Middle cut Type Safety shoes Material (Toe Protector) Steel Material (Inner Lining) Sweat-absorbent dry fabric Material (Sole) Synthetic rubber Material (Upper) Synthetic rubber (no gloss)
- MIDORI ANZEN Safety boots MPB-200Safety boots with steel toecap. The surface is a matte type.Height (cm) 34 Foot Width 3E Type of Shoes Boots Shape High cut Type Safety bootsfrom S$55.99Min. 2 days
- FUKUYAMA RUBBER IND G Rex 3 BlackShort length and lightweight. The torso has a 4-layer structure that makes it difficult to tear. Civil engineering and general water workMass (kg) 1 Load Capacity (kN) 10 Foot Width 3E Color Black Type of Shoes Half boots Function Lightweight Material (Toe Protector) Made of steel Shape Middle cut Material Rubber Type Safety shoes Material (Inner Lining) Sweat absorption knit
- FUJITE (TENGYU) Safety rubber bootsWith JIS S class equivalent iron toecap. Cylinder specification. With reflective tape. With side logo.Length (cm) 37(26cm) Foot Width 3E Standard Mass (grams per one foot) 970(26cm) Material (Sole) American rubber Type of Shoes Boots Color Green Shape High cut Standard JIS S class equivalent Material (Upper) Rubber Type Safety shoes Material (Toe Protector) Steel
- XEBEC Safety Boots20% lighter than before !! Sweat-absorbent dry fabric is used on the back side to reduce the crowd in the shoes. Comes with a cuff cover to prevent water, snow and foreign matter from entering. With reflective material, night work is safe and secure. With a 5mm thick EVA insole, it absorbs shocks... Read MoreMass (g) 1580 (both legs L) Type of Shoes Boots Foot Width EEE Shape High cut Function Lightweight Material (Toe Protector) Resin Material (Upper) Rubber Shoe Sole Rubber Type Safety boots Material (Inner Lining) Sweat-absorbent dry fabric Manufacturing Method Vulcanization process
- KOHSHIN RUBBER Safety bootsSafety boots with sole guard. Comes with a step-through prevention version (step-through resistance 1100N) The backing cloth is made of sweat-absorbing material to reduce discomfort. Uses steel toecap (equivalent to JIS standard S class) with reflective tape for night use) Ideal for construction ... Read MoreStep-through resistance (N (kgf)) 1100 Outside dimensions (cm) 32 (+ cover 6) Standard Mass (grams per one foot) About 980 (26cm) Color Black Type of Shoes Boots Finish Gloss Shape High cut Type Safety shoes Material (Toe Protector) Steel (S class equivalent) Material (insole) Sweat absorption flat Material Sweat lining clothfrom S$74.99Min. 2 days
- MIDORI ANZEN Safety boots MPB-5000NWith a hood, it keeps water and dust out of the boots. Not only safety and functionality, but also design creates a work scene. Civil engineering, construction work, etc.Length (cm) 37 Type of Shoes Boots Foot Width EEE Color Green Shape High cut Type Safety boots Specification With hoodfrom S$58.99Min. 32 days
- TAKADA SHOJI Highfield safety ankle bootsSafety short boots with an iron core equivalent to JIS S class. For all kinds of work such as transportation in rainy weather, warehousing distribution, civil engineering, construction, ironwork, agriculture, forestry, etc. * Be careful not to slip when using in a place wet with oil or water or i... Read MoreFoot Width EEE Color Gray / black Type of Shoes Half boots Shape Middle cut Type Safety shoes Material (Toe Protector) Steelfrom S$55.99Min. 6 days
- MonotaRO Safety Boots with Cover to Prevent SteppingBoots with toe box equipped with a plate on the sole to prevent treading. Since it has a cover, it prevents mud and sand from entering from above. The inner material is made of a material that absorbs sweat, so it relieves discomfort caused by sweat. The heel has a kicker that makes it easy to ta... Read MoreFoot Width 3E Length (cm) About 36.5 (26cm) Standard Mass (grams per one foot) About 960 (26cm) Shape High cut Material (Cover) PVC Material (Sole) Rubber Material (Upper) Rubber Type With step-out prevention plate / cover Material (Toe Protector) Steel Material (Inner Lining) Sweat-ABSorbing knitted fabric
- MARUGO Safety Proharks # 870Uses a specially formulated PVC with excellent oil resistance. It has a bottom design that drains well and does not slip easily. Antibacterial processing prevents the growth of germs. The sweat-absorbing material has improved foot stuffiness.Standard Mass (grams per one foot) 1040(26cm) Length (cm) 38.5(26cm) Foot Width 3E Color Black Type of Shoes Boots RoHS directive (corresponding to 10 substances) Correspondence Shape High cut Material (Toe Protector) Made of steel Material (Sole) PVC Material (Upper) PVC Type Safety shoes
- TULTEX Safety rubber boots AZ-4702Sweat-absorbent dry lining, with steel toecap, with reflective tape.Foot Width 3E Standard Mass (grams per one foot) 940 Length (cm) Approx. 38 (26cm) Type of Shoes Boots Shape High cut Color Navy x yellow Material (Upper) Rubber Material (Sole) Rubber Type Safety shoes Material (Toe Protector) Steel Function Sweat ABSorption
- TULTEX Safety Boots with Toe Cap, with Stepping Prevention AZ-58601The rubber quality is strong elasticity. With a stepping resistance plate. Contains an iron core equivalent to JIS L class.Foot Width 3E Height (cm) 40 (boots 31cm + cover 9cm) Length (cm) 40 (boots 31cm + cover 9cm) Standard Mass (grams per one foot) About 900 (26cm) Color Black Type of Shoes Boots Shape High cut Standard JIS L class equivalent Material (Back) Knitting Material (Upper) Rubber Type Safety shoes Material (Toe Protector) Steel Function Stepping prevention Material (Sole) Synthetic rubber
- MonotaRO Safety boots With cover BlackSafety boots with steel toe box. Since it comes with a top cover, you can prevent water from entering by tightening the string. The inner material is made of a material that absorbs sweat, so it relieves discomfort caused by sweat. * Regarding water absorption and quick drying, we use a part of t... Read MoreFoot Width 3E Length (cm) About 36.5 (26cm) Standard Mass (grams per one foot) About 850 (26cm) Color Black Type of Shoes Boots Shape High cut Material (Cover) PVC Function Quick drying Material (Upper) Rubber Material (Sole) Rubber Type With cover Material (Toe Protector) Steel Material (Inner Lining) Sweat-ABSorbing knitted fabric
- LOGU ANTOS (CO-COS NOBUOKA) Safety Boots to Prevent SteppingSafety: Equipped with toe protection toe core and stepping prevention plate. Durability: The weak points of safety boots have been greatly reinforced. With a hood, it shuts out mud, sand, etc. General work, civil engineering construction work, outdoor activities, etc.Standard Mass (grams per one foot) 1070(L) Foot Width 3E Length (cm) 40 (for LL size) Material (Inner Lining) Antibacterial dry cloth Type of Shoes Boots Shape High cut Color Navy Material (Upper) Rubber Type Safety boots Material (Toe Protector) Steel Function Stepping prevention
- KOHSHIN RUBBER Zona Safety S-01The height of the opening can be adjusted in 3 steps (35.0 cm, 30.0 cm, 26.0 cm for size 26.0 cm). Uses polyester fabric with excellent moisture absorption and quick-drying. Anti-corrosion surface-treated steel toecap prevents rust from occurring due to moisture and sweat inside the toes.Length (cm) 35(26cm) Foot Width 3E Standard Mass (grams per one foot) 980(25.5cm) Color Black Type of Shoes Boots Shape High cut Material (Toe Protector) Rust-proof steel Type Safety shoes
- LOGU ANTOS (CO-COS NOBUOKA) Safety bootsUses good quality rubber. Ideal for hard work. Dry meshLength (cm) 37 Foot Width 3E Standard Mass (grams per one foot) 790(L) Color Black (with gloss) Type of Shoes Boots Function Breathable Shape High cut Material (Upper) Rubber Type Safety boots Material (Toe Protector) Steel Material (Inner Lining) Sweat absorption knit
- MARUGO Safety professional hacks # 890It is a short type, lightweight and has excellent fit, and it is hard to get tangled even after long-term use! Uses a specially formulated PVC with excellent oil resistance. With hood and reflective material (rear part of hood). Antibacterial, deodorant, sweat-absorbent material lining. Oil resis... Read MoreLength (cm) 27 (L size) Foot Width 3E Standard Mass (grams per one foot) 720(L) Type of Shoes Boots Shape High cut Material (Sole) PVC Material (Upper) PVC Material (Toe Protector) Resin Type Safety shoes
- KITA Safety short rubber boots (with cover) 7310Short safety boots blue that are easy to put on and take off are available in large sizes from 4L (28.5 to 29.0) and 5L (29.5 to 30.0). The lining is a dry mesh fabric that reduces stickiness and absorbs sweat and dries quickly! With a cover to prevent rainwater and small dust from enteringFoot Width 3E Length (cm) About 26 (26cm) Standard Mass (grams per one foot) Approx. 800 (L) Type of Shoes Half boots Shape Middle cut Function Perspiration and quick drying Material (Sole) Rubber bottom Type Safety shoes Material (Toe Protector) Steel core Material (Upper) Synthetic rubber
- KITA Soft EVA safety rubber bootsIt is a safety boot with a resin toecap made of EVA rubber material, which is an ultralight material. Because it has no lining, it can be washed completely if it gets dirty! Softer, more flexible and easier to wear than regular EVA material! With an injection method and EVA material with a kickba... Read MoreFoot Width 3E Mass (g) Approx. 460 (L size) Type of Shoes Boots Material (Main Unit) EVA resin Synthetic rubber Shape High cut Material (Toe Protector) Resin core Type Safety shoes Function Super lightweight and flexible
- FUKUYAMA RUBBER IND Jordic Safety DXHigh-strength boots with a 4-layer structure (rubber, nylon mesh, rubber + sweat-absorbing knitted fabric) on the torso. Safety boots with an iron core in the toe. The soft synthetic leather cover on the cuff prevents foreign matter from entering. The back side has a non-slip engraving structure ... Read MoreMass (kg) 1.64(26.0cm) Compression Load (kN) 15 Foot Width 2E Length (cm) 35 Standard Mass (grams per one foot) 820(26cm) Type of Shoes Boots Shape High cut Material (Inner Lining) Knitting Color Navy Function Non-slip, sweat-absorbent knit Material (Upper) Rubber Material (Sole) Rubber Type Safety shoes Material (Toe Protector) Steel
- OTAFUKU GLOVE Safety light rubber bootsLight and semi-type safety boots using thick rubber. Steel toecap equivalent to JIS standard S class. With iron plate to prevent stepping For general and civil engineering workLength (cm) 30.5 Foot Width 3E Standard Mass (grams per one foot) Approximately 825 (26cm) Type of Shoes Half boots Shape High cut Standard JIS standard S class equivalent Material (Back) Knitting Material (Upper) Natural rubber Type Safety shoes Material (Toe Protector) Steel Function Stepping prevention
- KOHSHIN RUBBER Safety bootsProfessional specification. It has a long-lasting design that prevents the rubber from breaking and can be used for a long time. Sweat-absorbent material is used for the backing cloth to reduce discomfort. Comes with reflective tape for night use. Uses steel toecap (equivalent to JIS standard S c... Read MoreFoot Width 3E Type of Shoes Boots Shape High cut Material (Toe Protector) Steel (S class equivalent) Material (insole) Sweat absorption flat Material Sweat lining cloth
- K-WORK Safety belly short bootsVery short type with a total length of 16 cm (L size) and easy to put on and take off. Recommended for those who often take off and put on. Reflective material is used for the heel strap, so it is safe to use at night. Weight reduction has been achieved by using resin for the toecap.Color Black Type of Shoes Half boots Function Lightweight Shape Middle cut Toe Protection Resin Type Safety shoes
- XEBEC Safety Boots 85718Sweat-absorbent dry fabric is used for the lining material to reduce stuffiness. Comes with a cuff cover to prevent water and foreign matter from entering. It also comes with a reflective material, making it safe to work at night or in the dark. The 4mm thick EVA insole absorbs shock and reduces ... Read MoreMass (g) 1760 (L) (both legs) Cover Dimension (mm) 60 Type of Shoes Boots Foot Width EEE Shape High cut Type Safety shoes Toe Protection Steel tip Function Sweat absorption Manufacturing Method Vulcanization process
- XEBEC Safety boots with step-through prevention plate 85719Sweat-absorbent dry fabric is used for the lining material to reduce stuffiness. Comes with a cuff cover to prevent water and foreign matter from entering. It also comes with a reflective material, making it safe to work at night or in the dark. Comes with a steel stepping prevention plate that p... Read MoreCover Dimension (mm) 60 Color No. 90 Color Black Type of Shoes Boots Foot Width EEE Shape High cut Type Safety shoes Toe Protection Steel tip Function Sweat absorption Manufacturing Method Vulcanization process
- KITA Safety rubber boots 9010Light and half type safety boots The lining is a dry mesh fabric, which reduces stickiness and absorbs sweat and dries quickly! The wavy sole has grip, and it has good flexibility and is easy to use! Wide variety of sizes, from 24 cm to 30 cm!Foot Width 3E Standard Mass (grams per one foot) Approx. 790 (26cm) Color Black Type of Shoes Boots Shape High cut Function Perspiration and quick drying Material (Sole) Rubber bottom Type Safety shoes Material (Toe Protector) Steel core Material (Upper) Synthetic rubber
- XEBEC Safety boots 85704Boots with a toecap that are particular about safety and comfort. Civil engineering, construction, fishing, food processing.Foot Width 3E Length (cm) 40(26cm) Standard Mass (grams per one foot) 980(25cm) Type of Shoes Boots Material (insole) EVA Shape High cut Color Navy blue Material (Sole) Rubber Material (Upper) Rubber Type Safety boots Material (Toe Protector) Steel
- GD Japan Ultralight safety bootsLightweight safety boots with 70% rubber in EVA. It is stronger than EVA boots and lighter than rubber boots. Abrasion resistance tests are conducted at the production plant. Can be used up to -10 ° C without hardening. The toe part contains a resin toecap. Factory / architecture / food / general... Read MoreStandard Mass (grams per one foot) About 480 (L) Type of Shoes Boots Material (Sole) EVA + synthetic rubber Material (Upper) EVA + synthetic rubber Shape High cut Function Lightweight Material (Toe Protector) Made of resin Type Safety boots
- KITA Safety short pvc bootsShort length safety PVC boots. Modest camouflage shadow embossing that doesn't give a flashy impression makes your feet look fashionable! It is a product born from the customer's request for durable boots, not on the site where oil is used. Because of the injection manufacturing method an... Read MoreFoot Width 3E Standard Mass (grams per one foot) 680 (L) Height (cm) About 22.5 (L) Function Antibacterial and deodorant processing Color Black Type of Shoes Half boots Shape Middle cut Material (Upper) PVC resin Material (Sole) PVC resin Type Safety shoes Material (Toe Protector) Steel core
- OTAFUKU GLOVE Safety shoesContains a steel plate to prevent stepping. Has excellent oil resistance. The sole has a two-layer polyurethane sole with different foam densities, so it has good cushioning properties. The perishable toecap instep is made of genuine cow leather with excellent durability. Wise is a wide design of... Read MoreFoot Width 4E Type of Shoes Half boots Standard JSAA Class A certification Shape Middle cut Type Safety shoes
- XEBEC Safety boots 85720Work industry's first "rubber injection manufacturing method" boots Safety boots that have achieved high durability with a weight reduction of 1480g on both feet and resistance to bending by the injection manufacturing method, which is the first in rubber boots.Mass (g) 1480 (L size / both legs) Type of Shoes Boots Foot Width EEE Function Flex, durable, lightweight Material (Inner Lining) Knitting Material (Toe Protector) Made of steel Material (Upper) Rubber Material (Sole) Rubber Type Safety shoes Instep Type Slip-on type Manufacturing Method injection Target unisex
- ROUTE66 PVC safety bootsROUTE66 JIS.S grade equivalent oil-resistant sole with iron core, antibacterial and deodorant processed boots. * The sole is oil resistant, but the instep is not oil resistant.Length (cm) 38.5 (L size representative) Foot Width 3E Standard Mass (grams per one foot) 950 (L representative) Type of Shoes Boots Shape High cut Function Oil resistant, antibacterial, deodorant Material (Upper) PVC Material (Bottom) PVC (oil resistant) Type Safety shoes Material (Toe Protector) Steel
- KOHSHIN RUBBER Pender safetySafety boots with a cover to prevent water from entering. Sweat-absorbent material is used for the backing cloth to reduce stuffiness. Uses steel toecap (equivalent to JIS standard S class) with reflector for nighttime use Construction site work. General workOutside dimensions (cm) 32 (+ cover 5) Standard Mass (grams per one foot) About 850 (26cm) Type of Shoes Boots Finish Gloss Shape High cut Type Safety shoes Material (Toe Protector) Steel (S class equivalent) Material (insole) Sweat absorption flat Material Sweat lining cloth
- KITA Soft EVA Rubber Safety Short Rubber BootsShort length safety boots with resin toecap made of ultra-lightweight EVA rubber. Since there is no lining, you can wash it completely if it gets dirty! Safety boots that combine the lightness of EVA resin with the excellent flexibility of rubber Because it contains synthetic rubber, it is softer... Read MoreFoot Width 3E Material EVA resin Type of Shoes Half boots Shape Middle cut Material (Toe Protector) Resin core Type Safety shoes Function Ultra lightweight flex
- TULTEX Safety rubber bootsSafety model with steel stepping resistance plate. JIS standard equivalent steel toecap that covers from hard sites to general workType of Shoes Boots Shape High cut Material Rubber Type Safety shoes Material (Toe Protector) Steel
- Soukaido Spike Toughman Pro (built-in guard)Hood with squeeze that prevents dust from entering Impact-resistant / blade-proof Instep protective plate pressure-resistant / impact-proof / blade-proof Steel toecap hard to remove Double pinStandard Mass (grams per one foot) About 1050 (medium) Specification Includes aluminum armor plate Color Orange Material (Sole) Rubber + metal (pin) Toe Protection Steel
- HANSHIN SHAVING Disaster bootsIdeal for work. Multi-functional boots with built-in toecap and stepping prevention plate.Type of Shoes Boots Shape High cut Material PVC Type Safety shoes Specification With hood