All Category

Hard Hat Related Products

Helmet-related products are items used for helmets used during work. Acts like a helmet accessory. The inner cap for the hat used in the helmet, the chin strap for the helmet that can be easily replaced periodically so that it can continue to be used hygienically, inside the helmet to enhance the safety of the head by light work There are a wide variety of liners to use, a pen holder that can easily hold a pencil or pen, and a clip that prevents the helmet from being removed when wearing goggles. The purpose is to make the work smooth and safe.
View : Grid List
Filter

Items 1 - 40 of 523

Set Ascending Direction
  1. Helmet Holder Clip
    GENTOS Helmet Holder Clip
    Compatible with all GENTOS headlight models * Headlight body is not included. It may not be possible to install depending on the type and shape of the helmet.
    Trusco Part No.  817-9639  Mass (g)  10 
    Rating:
    95%
    from S$7.49
    Min. 2 days
  2. Helmet chin string (transparent type)
    TANIZAWA SEISAKUSHO Helmet chin string (transparent type)
    Since ultraviolet rays are transmitted, the transparent chin strap that does not easily get sunburn marks is made of vinyl, so it can be cleaned and kept clean. Please check the shape of the chin strap hook for helmets made by Tanizawa Seisakusho.
    Mass (g)  30 (one set)  Material  Vinyl 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  3. TAKE visor
    TOYO SAFETY TAKE visor
    Mass (g)  About 78  RoHS directive (corresponding to 10 substances)  Correspondence  Intended Use  Measures against heat  Material  bamboo 
    Rating:
    95%
    from S$19.99
    Min. 2 days
  4. Goggles Clip
    RIKEN OPTECH Goggles Clip
    Prevents slippage and detachment when wearing goggles on a helmet. It also supports wide bands of goggles.
    Mass (g/piece)  4.5  Mass (g)  Material  Duracon (R)  Color  White 
    Rating:
    93%
    from S$4.79
    Min. 2 days
  5. NP Chin String
    DIC PLASTIC NP Chin String
    Rating:
    100%
    from S$5.29
    Min. 2 days
  6. Swan goggles clip 1 YC bracket
    YAMAMOTO (Yamamoto Kogaku) Swan goggles clip 1 YC bracket
    This is convenient when using a helmet and goggles at the same time. Improves the fit of goggles.
    Mass (g)  10  Dimensions, Width W x Length L (mm)  10×35  Natural Length (mm)  350  Trusco Part No.  812-1888  Material  Iron 
    from S$159.90
    Min. 2 days
  7. PA interior
    DIC PLASTIC PA interior
    EG4 specifications NP one-touch chin strap standard equipment
    Suitable for  SD-Y 
    from S$13.99
    Min. 7 days
  8. High visibility helmet cover N
    MIDORI ANZEN High visibility helmet cover N
    We use materials that comply with the high visibility standard (JIS T 8127). Machine washable You can use it just by putting it on your helmet * Cannot be attached to all helmets
    Trusco Part No.  120-9941  Color  Fluorescent yellow  Width (mm)  455  Height (mm)  440  Mass (g)  43  Specification  Free size (length 44cmX width 45.5cm) 
    Rating:
    60%
    from S$25.99
    Min. 2 days
  9. Hietare Hyper 2
    Japan Green Cross Hietare Hyper 2
    Reflects sunlight with aluminum coating × Cooling agent for helmets. Soak the main body in water, squeeze it lightly, and attach it to the back band of the helmet. The synergistic effect of the helmet-specific ice pack and the heat of vaporization suppresses the rise in body temperature. Installa... Read More
    Mass (g)  125  Dimension (mm)  160×220  Intended Use  Measures against heat 
    from S$19.99
    Min. 2 days
  10. Inner Cap for Helmet
    Reable Inner Cap for Helmet
    With rubber, it can be used for a wide range of head circumferences from 560 to 600 mm. As it is a foldable type, it does not take up space during storage. With a solid look, it protects the helmet from dirt. As an inner when wearing a helmet such as during a factory tour Since it is intended to ... Read More
    Folding dimensions (mm)  280×70  Head Circumference (cm)  56~60  Material  Polypropylene nonwoven fabric / rubber  Color  White 
    Rating:
    95%
    from S$37.99
    Min. 2 days
  11. Helmet Chin Strap
    TANIZAWA SEISAKUSHO Helmet Chin Strap
    You can keep it hygienic by replacing it regularly. The VQ-T16 has a thin ear strap of 10 mm for a natural fit.
    Rating:
    96%
    from S$6.49
    Min. 2 days
  12. Goggles Clip
    TOYO SAFETY Goggles Clip
    By attaching it to the helmet and fixing the band of the goggles, it prevents slippage and falling off due to hard work. As it is a clip type, it is easy to put on and take off.
    RoHS directive (corresponding to 10 substances)  Correspondence  Material  PC 
    Rating:
    92%
    from S$4.39
    Min. 2 days
  13. Whistle Holder
    TANIZAWA SEISAKUSHO Whistle Holder
    A hard hat-mounted holder that can be quickly put out when needed. The whistle can be pulled out when needed and rewound when not needed.
    Mass (g)  35  Color  Gray 
    Rating:
    82%
    from S$15.99
    Min. 2 days
  14. Cloth Hat Liner Bampino
    TANIZAWA SEISAKUSHO Cloth Hat Liner Bampino
    A special liner for cloth hats that can be used as a set with your hat. Ensuring head safety during light work. * Cannot be used in an environment where nationally certified products should be used.
    Width x Length (mm)  174×198  Trusco Part No.  399-3914  Mass (g)  80  Size  Free  Material  Polyethylene (PE)  Color  White 
    Rating:
    86%
    from S$4.79
    Min. 2 days
  15. 3 colors perspiration pad for microfiber helmet
    FUJIMOTO CORPORATION 3 colors perspiration pad for microfiber helmet
    Water absorption is 5 times that of cotton, and durability is 1.3 times that of cotton. It has good breathability and dries easily, so it is difficult for bacteria to grow.
    Intended Use  Sweat absorption  Material  Polyester, nylon  Dimensions (cm)  22×5.5 
    Rating:
    91%
    from S$8.59
    Min. 2 days
  16. Whistle Holder
    TOYO SAFETY Whistle Holder
    For helmet mounting. Smoothly stores unused whistles. It can be easily pulled out when used, and it stops at the required length with a rubber stopper. * Some helmets cannot be installed.
    Rating:
    73%
    from S$23.99
    Min. 2 days
  17. Headlight clip
    TOYO SAFETY Headlight clip
    With this headlight clip, you can prevent the rubber band from slipping when you attach the headlight or dustproof glasses (goggle type) to the protective cap. * Helmet and headlights are sold separately.
    RoHS directive (corresponding to 10 substances)  Correspondence  Suitable for  For TOYO No.391F, 392F  Set Contents  No.88-OK (2 pieces), No.88-L (2 pieces) 
    Rating:
    84%
    from S$6.69
    Min. 2 days
  18. One-touch Chin Strap for Helmet Small
    MonotaRO One-touch Chin Strap for Helmet Small
    Fits FS-100II, SS-100, SS-101, SS-830Z helmets * Do not use for anything other than its intended purpose.
    Suitable for  FS-100Ⅱ、SS-100、SS-101、SS-830Z  Specification  For SFOT jaws  Type  Ago string 
    Rating:
    90%
    from S$2.29
    Min. 2 days
  19. Inner Paper Hat for Helmet
    TRUSCO Inner Paper Hat for Helmet
    Inner paper hat for helmets. It is hygienic by wearing it directly on the hair. There is rubber on the back so you can adjust the size of your head. It is a top opening and closing lid box specification that is convenient for storage. As an inner for helmets. * It is used for hygienic purposes an... Read More
    Mass (kg)  1.4 / box  Trusco Part No.  432-9759  Dimension (mm)  519(±15)  Size  Free size  Material  Non-woven  Color  White 
    Rating:
    98%
    from S$129.90
    Min. 2 days
  20. Clip-on Type Pen Holder
    TOYO SAFETY Clip-on Type Pen Holder
    Pencils and ballpoint pens can be easily inserted. It can also be attached to helmets other than TOYO.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    68%
    from S$5.99
    Min. 2 days
  21. Hellcover
    TANIZAWA SEISAKUSHO Hellcover
    A soft material that does not damage the walls and interior. Used by covering it on a protective cap. For interior finishing work (soft cover) * Not compatible with helmets with a brim all around.
    Color  Blue  Material  Urethane foam 
    Rating:
    96%
    from S$17.99
    Min. 2 days
  22. Disposable paper hats
    TOYO SAFETY Disposable paper hats
    Inside the helmet when visiting the factory. It is soft and has excellent water absorption. made in Japan. * Up to 58.3 cm in head circumference.
    Mass (g)  About 11  RoHS directive (corresponding to 10 substances)  Correspondence  Intended Use  Sweat absorption 
    Rating:
    80%
    from S$14.99
    Min. 2 days
  23. Helmet inner mesh
    MonotaRO Helmet inner mesh
    An inner cap made of mesh material that prevents stuffiness when wearing a helmet. It also prevents the inside of the helmet from getting dirty and is hygienic. As it is washable, you can always use it in a clean state. With a convenient pocket that can hold a small ice pack. As an inner cap when... Read More
    Size (cm)  Approximately 50-58 (free)  Color  Black  Intended Use  Mule reduction  Material  Polyester 
    Rating:
    76%
    from S$8.99
    Min. 2 days
  24. Transparent Vinyl Chin StraPS Set
    TOYO SAFETY Transparent Vinyl Chin StraPS Set
    Agohimo for helmets. One-touch type. made in Japan.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$6.79
    Min. 2 days
  25. Chin strap for helmet
    MonotaRO Chin strap for helmet
    Replacement chin strap for Monotaro American type helmet (part number SHH-3012) and MP type helmet (part number SHH-2007). It is a set of chin strap and ear strap. Monotaro Helmet Part No. SHH-30 for 12/2007 * Do not use for helmets other than those designated by Monotaro.
    Specification  Chin strap for helmet 
    Rating:
    83%
    from S$1.99
    Min. 2 days
  26. Sweat-absorbing Helmet Inner
    COVER WORK Sweat-absorbing Helmet Inner
    Exhilarating mesh. For helmet hat
    Material  Polyester (mesh)  Intended Use  Sweat absorption 
    Rating:
    78%
    from S$12.99
    Min. 2 days
  27. LED Helmet Clip
    Tajima (TJM DESIGN) LED Helmet Clip
    Helmet clip for headband Helmet band fixing clip for LED headlights Product specifications are subject to change without notice. Please note.
    Rating:
    87%
    from S$5.39
    Min. 2 days
  28. Refreshing Cap
    TANIZAWA SEISAKUSHO Refreshing Cap
    An undercap with excellent sweat absorption and wicking properties that is worn under the protective cap. With a size adjustment function, it fits perfectly. Uses a sweat-absorbing and quick-drying material, Aqua Dry. * Helmet is sold separately.
    Mass (g)  27  Trusco Part No.  213-5531  Intended Use  Sweat absorption  Type  Under cap  Other  Helmet is not included 
    Rating:
    82%
    from S$19.99
    Min. 2 days
  29. Cool Touch Helmet Inner Cap SHAKE & COOL
    KITA Cool Touch Helmet Inner Cap SHAKE & COOL
    Cool helmet inner using Shake & Cool. It's easy to use in 3 steps and it gets cool and cold. UV 98% cut for UV protection. Antibacterial processing.
    Mix Rate (%)  100% polyester  Size  Free  Intended Use  Measures against heat 
    Rating:
    93%
    from S$12.99
    Min. 2 days
  30. Round paper hat for helmet (120 pieces)
    TRUSCO Round paper hat for helmet (120 pieces)
    Mass (kg)  1.8  Trusco Part No.  114-4182  Size  Free  Material  Paper  Color  White 
    Rating:
    80%
    from S$94.99
    Min. 2 days
  31. Chin Strap for Helmet
    MIDORI ANZEN Chin Strap for Helmet
    Mass (g)  10  Trusco Part No.  388-6913  Material  Polypropylene (PP) 
    Rating:
    60%
    from S$4.29
    Min. 2 days
  32. Helmet inner
    PAX-ASIAN Helmet inner
    High water absorption sheet as a cool cap to prevent sweating Helmet inner with high water absorption sheet "OASIS SAF", OASIS SAF 1g absorbs 120ml of water Helmet inner
    Size  Free  Intended Use  Sweat absorption 
    Rating:
    60%
    from S$17.99
    Min. 2 days
  33. Helmet storage bag
    MonotaRO Helmet storage bag
    A storage bag that is convenient for carrying and storing helmets. As it is a fastener type, it is easy to put in and take out. It is convenient to carry because it has a handle. You can even store a general American type helmet. It is a bag for storing a basic helmet, but it can also store shoes... Read More
    Dimensions, Width W x Depth D x Height H (mm)  Approx. 245 x 290 x 190 (maximum part)  Color  Navy  Material  Polyester 
    Rating:
    74%
    from S$19.99
    Min. 2 days
  34. Head Protective Equipment
    GUARDNER Head Protective Equipment
    Material  PE 
    Rating:
    90%
    from S$28.99
    Min. 2 days
  35. Sunshade
    DENZO Sunshade
    The surface of the shade is coated, making it resistant to water. There is a trivet inside the shade, and it floats a little from the head, so it is well ventilated and hard to get stuffy. For awning
    Set Contents  Gotoku 
    Rating:
    73%
    from S$18.99
    Min. 2 days
  36. Helmet inner cap
    TRUSCO Helmet inner cap
    The sweat pad on the part you want to keep sweat from dripping during work. Uses a material that dries quickly. Since it is black, it does not stand out even when wearing a helmet.
    Mass (g)  25  Trusco Part No.  856-6896  2018 Trusco page  9 0759  Color  Black  Size  Free  Specification  Inner cap for helmets and hats.  Material  Nylon, polyurethane, polyester 
    Rating:
    93%
    from S$12.99
    Min. 2 days
  37. Sweat pad for hats Strong adhesive type
    Japan Vilene Company Sweat pad for hats Strong adhesive type
    Trusco Part No.  447-7561 
    Rating:
    100%
    from S$67.99
    Min. 2 days
  38. Helmet Inner Parts Set FP-2QRA
    MIDORI ANZEN Helmet Inner Parts Set FP-2QRA
    A set of interior, ear straps and chin strap. * The interior that fits each helmet part number is different.
    Suitable Model  SC-9, 11, 12, PCL, S1, M series  Material  Polyethylene resin, etc.  Mass (g)  107  Trusco Part No.  396-4990 
    Rating:
    85%
    from S$17.99
    Min. 2 days
  39. Perspiration Pad for Helmet Sweat
    AS ONE Perspiration Pad for Helmet Sweat
    Put it on the inside of a hat or helmet to prevent sweat from getting into your eyes. It has a fast water absorption rate and excellent water retention.
    As ONE Part Number  1-9145-01  Intended Use  Sweat absorption 
    Rating:
    88%
    from S$4.89
    Min. 2 days
  40. Round Paper Hat (Nonwoven Fabric)
    TANIZAWA SEISAKUSHO Round Paper Hat (Nonwoven Fabric)
    A disposable undercap for a visitor's helmet. It is hygienic by putting it directly on the hair.
    Head Circumference (cm)  (Maximum support) 58  Mass (kg)  1.4  Trusco Part No.  492-4142  2018 Trusco page  6 0145  Size  Free  Specification  Free size  Material  Polypropylene (PP), cardboard  Color  White 
    from S$94.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 523

Set Ascending Direction