All Category

Hooks for Fall Protection Equipment

Other Related Pages

View : Grid List
Filter

40 Item(s)

Set Ascending Direction
  1. TSUYORON Fall Protection Hook Hanger
    FUJII DENKO TSUYORON Fall Protection Hook Hanger
    It can be installed on either the left or right side. A hanger for hanging large-diameter hooks when wearing a safety belt.
    Material  Nylon resin  Mass (g)  10  Trusco Part No.  769-2714  Suitable Belt Width (mm)  50 
    from S$6.69
    Min. 2 days
  2. Hook No.H-10
    TOYO SAFETY Hook No.H-10
    RoHS directive (corresponding to 10 substances)  Dimensions, Height x Width (mm)  About 210 x about 130  Mass (g)  About 375  Material  Iron 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  3. Fall prevention equipment (safety belt) Hook hanger
    Tajima (TJM DESIGN) Fall prevention equipment (safety belt) Hook hanger
    A resin hook for hanging on the belt when the safety belt hook is not used. There are two places, one with a lock that won't fall even if you move it, and the other where you put it when you want to open your hand a little.
    Mass (g)  17  Trusco Part No.  406-9978  Suitable for  50mm wide belt  Material  Resin 
    Rating:
    54%
    from S$5.29
    Min. 2 days
  4. Retrofit hook hanger Harness fall prevention device (safety belt)
    Tajima (TJM DESIGN) Retrofit hook hanger Harness fall prevention device (safety belt)
    Wide outer shape that allows the hook to be easily stored and fits comfortably. Easy to install and remove. Retrofit hook hanger for harness * If you use it incorrectly, it may fall, so please do not use it. * Product specifications are subject to change without notice. Please note.
    Applicable belt thickness (mm)  Within 1.5  Suitable Belt Width (mm)  Within 48 
    Rating:
    87%
    from S$5.89
    Min. 2 days
  5. Fall prevention equipment (safety belt) Thigh belt hanger for harness
    Tajima (TJM DESIGN) Fall prevention equipment (safety belt) Thigh belt hanger for harness
    Eliminates the inner sagging of the thigh belt Thigh belt hanger for SEG harness * Please use in combination with a harness with the SEG mark. Product specifications are subject to change without notice. Please note.
    Trusco Part No.  796-5664  Suitable for  SEG harness S / M / L 
    Rating:
    100%
    from S$42.99
    Min. 2 days
  6. Safety Belt Parts Hook Hanger
    TRUSCO Safety Belt Parts Hook Hanger
    ● A hanger for hanging large-diameter hooks when wearing a safety belt. ● 50mm dedicated type used for general work safety belt. ● Can be installed on either the left or right side. If the safety belt you are currently using is worn, scratched, or dirty, you can easily replace it. * Do not apply ... Read More
    Mass (g)  10  Suitable Belt Width (mm)  50  Trusco Part No.  255-1730 
    Rating:
    89%
    from S$2.39
    Min. 2 days
  7. Fall Protection Hook
    FUJII DENKO Fall Protection Hook
    With double retaining device
    Overall Length (mm)  219  Tensile Strength (kN)  13.0 or more  Suitable Rope Diameter (Φmm)  16 or less  Mass (g)  About 390  Maximum Jaw Opening (mm)  50 
    Rating:
    90%
    from S$58.99
    Min. 2 days
  8. Fall Protection Hook Hanger
    FUJII DENKO Fall Protection Hook Hanger
    Suitable for  50~60mm 
    Rating:
    100%
    from S$2.29
    Min. 2 days
  9. Retrofit hook hanger For torso belt Fall prevention device (safety belt)
    Tajima (TJM DESIGN) Retrofit hook hanger For torso belt Fall prevention device (safety belt)
    A newly designed metal gate with excellent durability that can be attached without removing the belt and is resistant to skidding. Retrofit hook hanger for torso belt * If you use it incorrectly, it may fall, so please do not use it. * Product specifications are subject to change without notice. ... Read More
    Applicable belt thickness (mm)  Within 3  Suitable Belt Width (mm)  50 (within 53) 
    Rating:
    70%
    from S$12.99
    Min. 2 days
  10. Wire rope hanger
    TSUKUSHI KOBO Wire rope hanger
    For organizing sling wire ropes, etc. Since it has a clamp (welded), please install it on a single pipe. If the delivery destination is a private house (detached house / apartment house), the shop name is required. Please note that delivery may not be possible if there is no store name. * Dependi... Read More
    Mass (kg)  0.77  Trusco Part No.  481-2352  Material  Steel 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  11. Full harness type fall prevention device  Protector  Work positioning rope  Work positioning  For full harness
    3M Full harness type fall prevention device Protector Work positioning rope Work positioning For full harness
    Please use it for work positioning when working on pillars. It cannot be used for fall prevention purposes. For fall prevention at aerial work such as construction sites and factories
    Rope Length (m)  Mass (kg) 
    Rating:
    100%
    from S$149.90
    Min. 2 days
  12. Hook catch
    TSUKUSHI KOBO Hook catch
    Easy to install and remove. It is a fall prevention device that attaches a hook catch to all the screws (3/8 inch) embedded in the ceiling and hooks the safety belt so that it can be used.
    Mass (g)  265  Trusco Part No.  366-8746  Dimensions, Height x Width (mm)  75×75  Material  Steel 
    from S$94.99
    Min. 2 days
  13. Hook hanger for harness
    Polymer Gear Hook hanger for harness
    It has a wide opening and is easy to hook. Since it can be attached and detached, it can be installed in the desired position. Replacement of hook hanger for harness * Dedicated to the harness body (belt width 43 mm). * Never use it for U-shaped suspension.
    Mass (g)  10  Color  Black 
    from S$2.69
    Min. 2 days
  14. Hook hanger for 50mm width
    TOYO SAFETY Hook hanger for 50mm width
    RoHS directive (corresponding to 10 substances)  Mass (g)  12  Suitable Belt Width (mm)  50  Material  Nylon 
    from S$3.19
    Min. 4 days
  15. Stainless Rebar Wire Twister Hook
    DOGYU Stainless Rebar Wire Twister Hook
    Made of stainless steel and resistant to rust. Hacker hook.
    Suitable Tool  Hacker, chalk, folding scale, etc.  Shape  Movable belt through 4 hole type 
    from S$88.99
    Min. 5 days
  16. Mr. Ototo
    TSUKUSHI KOBO Mr. Ototo
    For preventing the soundproof panel used for building demolition work from falling. For preventing the scaffolding mesh sheet and vertical net tensioning work from falling. Lightweight and easy to carry. It can be handled like a safety belt. The rope is always stretched and there is no anxiety. E... Read More
    Mass (g)  850  Rope Length (m)  1.5 
    from S$159.90
    Min. 5 days
  17. Hook Hanger (for Fall Protection Equipment)
    ESCO Hook Hanger (for Fall Protection Equipment)
    Esco Part No.  EA998JA-2 
    from S$7.49
    Min. 6 days
  18. Wandering
    UNIT (UNIT SAFETY SIGNS) Wandering
    The safety belt rope does not twist. A must-have item for indoor wiring and plumbing work on the ceiling. You can work safely and efficiently without twisting the safety belt rope. Proven safety in drop tests. Safety was confirmed by a drop test with a 75 kg sand sac attached to the safety belt. ... Read More
    Mass (g)  140  Trusco Part No.  741-8892  Dimension (mm)  94×64  Material  Special steel 
    from S$69.99
    Min. 5 days
  19. Wire hanger
    UNIT (UNIT SAFETY SIGNS) Wire hanger
    Dimension (mm)  130×1200  Mass (kg)  Trusco Part No.  739-6015  Included Accessories  Clamp bracket x 2 welding  Material / Finish  Iron / Unichrome plating 
    from S$119.90
    Min. 5 days
  20. Holder (For Full Harness Fall Protection Equipment)
    ESCO Holder (For Full Harness Fall Protection Equipment)
    With a hanger function for hooking hooks and a clip function for bundling straps. When not working, the lanyard can be folded, inserted and stored.
    Esco Part No.  EA998FD-200  Suitable for  45mm wide belt  Mass (g)  20 
    from S$14.99
    Min. 6 days
  21. Hook pocket +49123
    KIYO (KH) Hook pocket +49123
    Width (mm)  150  Height (mm)  248  Mass (g)  60  Color  Black 
    from S$3.49
    Min. 6 days
  22. Hook guide + FUGID
    KIYO (KH) Hook guide + FUGID
    Length (mm)  26  Width (mm)  36  Height (mm)  69  Mass (g)  Color  Black 
    from S$4.59
    Min. 6 days
  23. Hanging holder
    DOGYU Hanging holder
    Shank Diameter (Φmm)  Material  Stainless steel 
    from S$17.99
    Min. 5 days
  24. Hook No.F-0
    TOYO SAFETY Hook No.F-0
    RoHS directive (corresponding to 10 substances)  Mass (g)  About 190  Material  Iron 
    from S$9.19
    Min. 4 days
  25. Full harness type for fall prevention equipment  Thigh belt hanger
    ESCO Full harness type for fall prevention equipment Thigh belt hanger
    Thickness (mm)  1.7  Length (mm)  375 
    from S$39.99
    Min. 5 days
  26. CARITOOL Harness Tool Holder
    PETZL CARITOOL Harness Tool Holder
    A tool holder for carrying tools that can be attached to the waist belt of Petzl's full harness. You can take out and store tools with one hand. With a clip on the inside, it can be set in the slot or webbing of the webbing belt of the harness. A gate with an integrated plastic cover reduces ... Read More
    Rating:
    100%
    from S$14.99
    Min. 2 days
  27. Hook No.F-1
    TOYO SAFETY Hook No.F-1
    RoHS directive (corresponding to 10 substances)  Mass (g)  About 190  Material  Iron 
    from S$11.99
    Min. 4 days
  28. Hook No.F-3
    TOYO SAFETY Hook No.F-3
    RoHS directive (corresponding to 10 substances)  Mass (g)  About 125  Material  Iron 
    from S$15.99
    Min. 4 days
  29. Full harness type for fall prevention equipment  Hook hanger
    ESCO Full harness type for fall prevention equipment Hook hanger
    Dimension (mm)  130×90×33  Belt Width (mm)  48  Material  Nylon 
    from S$7.49
    Min. 5 days
  30. Stainless tool hook
    DOGYU Stainless tool hook
    A fixed U-shaped hook that can be used through the waist belt. * The tool hook cannot completely fix the tool. Please use the safety cord together.
    Rating:
    100%
    Discontinued
  31. Stainless tool hook
    DOGYU Stainless tool hook
    Suspend tools, etc.
    Rating:
    80%
    Discontinued
  32. Hook hanger for TR150
    Tajima (TJM DESIGN) Hook hanger for TR150
    A special hook hanger that also serves as a hole crusher to prevent the hook from hanging on the reel part of the main body. By attaching the hook hanger for TR150, the vertical safety belt "TR150" you are using can be hung on two hooks. Easy installation and neat storage of hooks. The ... Read More
    Material  (Hook receiving part) Stainless steel  Mass of Main Unit (g)  17  Main Unit Dimensions, Width W x Depth D x Height H (mm)  24×28×75  Trusco Part No.  447-6948  Specification  For vertical safety belt TR150 only 
    Rating:
    20%
    Discontinued
  33. Tsuyoron safety belt hook
    FUJII DENKO Tsuyoron safety belt hook
    The structure is such that the mouth of the hook cannot be opened unless two or more consecutive operations are performed. (Double hook with stopper) This product is a safety belt part, but it can also be used for lifting lightweight objects.
    Mass (g)  About 220 
    Discontinued
  34. MC tool hook
    DOGYU MC tool hook
    Discontinued
  35. Plastic cover ring for hammer hook
    DOGYU Plastic cover ring for hammer hook
    Discontinued
  36. Tuyoron safety hook
    FUJII DENKO Tuyoron safety hook
    The structure is such that the mouth of the hook cannot be opened unless two or more consecutive operations are performed. (Double hook with stopper) This product is a safety belt part, but it can also be used for lifting lightweight objects.
    Mass (g)  About 220 
    Discontinued
  37. Tsuyoron Rotating hook
    FUJII DENKO Tsuyoron Rotating hook
    Overall Length (mm)  195  Breaking Load (kN)  19 
    Discontinued
  38. Bra Meta Hook
    DOGYU Bra Meta Hook
    Discontinued
  39. Hook No.EH-11
    TOYO SAFETY Hook No.EH-11
    Mass (g)  About 360  Material  Iron 
    Discontinued
  40. Hanging hook
    Toei Kanamono Hanging hook
    Discontinued
View : Grid List
Filter

40 Item(s)

Set Ascending Direction