Measuring Tools
After disassembling and servicing the car, the parts and body must be assembled. A device that checks whether the assembled parts are normal is a measuring instrument. Although it is used sequentially during assembly, it is checked with measuring equipment whether it is assembled as designed. The joint part of the car is tightened with bolts, etc., but the measurement tool to check this tightening force is a torque wrench. Cars also have complex electrical systems and built-in microcomputers. The measuring instruments for this are multimeters and code readers. The current and voltage can be measured to diagnose the cause of abnormal car operation. Vernier calipers for measuring dimensions and tachometers for measuring rotational force are measuring instruments stipulated by the law for certification by maintenance shops.
Other Related Pages
Mother Tool Full color handy type 2 phenomenon oscilloscope + 4000 count DMM4000 counts All-in-one, full-color handy oscilloscope with true effective value type DMM function Equipped with USB communication function, data can be transferred to a personal computerVoltage Axis Range 5mV/div～5V/div LCD Specifications 3.8 inch color LCD AC Voltage (V) 4～400 AC Current 40mA～20A Resistance 400Ω～40MΩ Dimensions, Width W x Height H x Depth D (mm) 113×180×40 Coupling AC・DC Capacitance 51.2nF-100μF Mass (g) About 690 Time Axis Range 5ns/div～5s/div Sampling Up to 100 MS / S DC Vurrent 40mA～20A DC Voltage 400mV～400V Input Impedance 1MΩ Frequency Band (MHz) 20from S$1,199.00Min. 2 days- JTC Sound scopeIt is possible to switch by sensor while driving and accurately detect the location of abnormal noise.RoHS directive (corresponding to 10 substances) Correspondencefrom S$459.90Min. 2 days
- JTC Compression test adapterRoHS directive (corresponding to 10 substances) Correspondencefrom S$199.90Min. 6 days
- MonotaRO Electroscope tester with LED + buzzer DC6-24V onlyYou can check the energization not only with light but also with buzzer sound. The LED light is also distinguished by red (-) and green (+), and the polarity can be confirmed. Electroscope work such as checking energization and polarity * Do not use for anything other than its intended purpose. *... Read MoreMaterial (Cap) PP (both front and rear) Material (Needle) Iron (nickel plating) Electricity Detection Range (V) (DC)6～24 Material (Body) ABS (blue part), AS (transparent part)
- MonotaRO Electroscope Tester DC6 ~ 24V OnlyYou can detect the voltage of the wiring cord. If the power is on, the incandescent lamp built into the handle will illuminate. * Do not use for anything other than its intended purpose.Electricity Detection Range (V) (DC)6～24 Material (Grip) AS material Cable Length (m) 0.8
- MonotaRO Sound scope with sound collectorIt is a stethoscope for automobiles that can hear various abnormal noises such as valves, bearings, and water pumps in engines and missions. In addition, it is equipped with a sound collector so that you can hear fine sounds. Since it is a 3mm shaft, it is effective even in narrow spaces. If you ... Read MoreIncluded Accessories Sound collector Shaft Diameter (Φmm) 3 Hose Length (mm) 662 Shaft Length (mm) 275 Overall Length (mm) 87 (excluding shaft)
- MonotaRO Compression testerYou can easily measure the cylinder compression of a gasoline engine. Comes with 2 types of aluminum tubes (straight and curved types), allowing you to measure various engines. Various adapters for standard cylinders are included. Equipped with a self-locking mechanism on the rubber hose. No need... Read MoreAdapter size M10×1.0・M12×1.25・M14×1.25・M18×1.5 Measuring Range (kPa) 0～2100
- ANEX Buzzer & LED auto testerAdopting a long-life LED, you can know the presence or absence of voltage and polarity judgment of the car by sound and light.Tip Needle type Specification Energization check, DC polarity judgment DC Voltage (V) 6～24 Trusco Part No. 276-0037 Mass (g) 43
- Amon Industry Voltage Detection TesterEasy-to-use basic type Check energization with LED lightCable Length (m) 0.8 Allowable Voltage Range For DC6V ~ 24V
- MonotaRO Code readerThe code reader is a DTC (Diagnostic Trouble Cord) reader that can be easily handled simply by inserting it into the OBDII standard socket (connection port 16 pin), and reads and displays the P code (power train system) of the engine transmission. It is a fault diagnosis machine for automobiles t... Read MoreOperating Ambient Temperature (℃) 0～50 Display 2 inches Cable Length (m) 550 Dimension (mm) 70×110×16 Rated Operating Voltage (V) DC12 Language Display English Included Accessories Exclusive drawstring bag
- MonotaRO Torque Wrench Preset Type for Large VehiclesEasy-to-grip handle design with easy torque adjustment. Even large sockets can be easily removed with a push button. Since it can be used for both right and left rotation, it can also be used for tightening reverse screws like truck left tires. The quality complies with DIN/ASME standards. For ti... Read MoreOverall Length (mm) 1234 Torque Measurement Range (Nm) 150～800 Square Drive (mm) 25.4 Minimum Scale (Nm) 5 Mass (kg) 5.6 Material (Main Unit) Carbon steel Included Accessories Plastic case, lock key Surface Treatment Satin chrome Material (Handle) TPR
- MonotaRO Universal Pitch GaugeFour types of pitch gauges can measure various millimeter / inch size screw pitches and bolt diameters. For measuring screw pitch and bolt diameter * Do not use for any other purpose.Material Aluminum
- JTC Plastic gaugeFor metal clearance measurementOverall Length (cm) 30 RoHS directive (corresponding to 10 substances) Correspondence
- Amon Industry Voltage detection testerStylish and sharp form with particular attention to design You can check the energization of DC6V to DC24V with the LED light and buzzer sound. Polarity can be confirmed with 2-color LED (red / green)LED One 2-color LED (red / green) Usable voltage (V) DC6～DC24
- Amon Industry Digital voltage testerYou can check the energization with the digital display of the voltage value. You can see the voltage value with the digital display even for the minus line. You can check the continuity between two points With auto-off function to prevent forgetting to turn off Button battery with manual that su... Read More
- MonotaRO Cordless circuit testerWhen the needle part at the tip of the tester touches the target object, the rear LED light will light up and a buzzer will sound if the tester is energized. A cordless cord tester that can detect the voltage of a DC circuit without using a ground wire. When a positive voltage is detected, the bu... Read MoreOverall Length (mm) 147 Mass (g) 50 Included Accessories A23 dry cell (12V) x 2 Suitable Battery AAA battery x 2 Measuring Range DC3～28V
- MonotaRO Torque Angle GaugePlace the L-shaped rod against the surrounding object to fix the main body, and turn it to the specified angle. After tightening with a torque wrench, when tightening further depending on the angle. * Do not use for anything other than its intended purpose. * Check that the snap ring is not loose... Read MoreSquare Drive (mm[inch]) 12.7[1/2"] Mass (g) 160 (including wrench) Minimum Scale 2° Angle Measuring Range (°) 360 Gauge diameter (Φmm) 68
- Mother Tool Digital MultimetersMulti-function 4000 count indicator board Japanese support makes range setting easy to understand.Duty Ratio 0.1%～99.9% AC Voltage (V) 400m/4/40/400/750 DC Voltage 400mV/4V/40V/400V/1000V Resistance 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ DC Vurrent 400μA/4000μA/40mA/400mA/4A/10A AC Current 400μA/4000μA/40mA/400mA/4A/10A Capacitance 40nF/400nF/4μF/40μF/400μF/4000μF Frequency 9.999Hz～10MHz Dimensions, Width W x Height H x Depth D (mm) 98×177×39 Power Supply 9V(006P)×1 Mass (g) About 300 Included Accessories Instruction Manual / Battery / Test Lead
- JTC Code readerNo complicated settings required! Ready to use! No version upgrade required! Maintenance fee 0 yen! For reading and erasing P-codes. * Only for light car to ordinary car enginesRoHS directive (corresponding to 10 substances) Correspondence
- SIGNET Mechanic test scopeA scope that can clearly detect injector operating noise and noise from the engine and transmission. The aluminum needle with a total length of 280 mm makes it easy to access narrow and hard-to-reach places and catch fine noise clearly. If you replace the needle with the attached rubber trumpet, ... Read MoreOverall Length (mm) 280 (needle)
- Pro-Auto Torque wrench for automobile drainMinimum Scale (Nm) 0.5 Mass (kg) 0.9 Measurement range (N.m) 10～60 Overall Length (mm) 285 Square Drive (mm) 9.5
- KTC Wheel nut dedicated torque wrenchHighly accurate torque management is possible with dedicated settings for each torque specified by the manufacturer. The total length is set to the optimum length so that the tire and hands do not interfere. Work time is shortened by adopting a ratchet head (36 gears). A single-purpose torque wre... Read MoreOverall Length (mm) 423 Trusco Part No. 807-0914 Set torque (Nm) 103 Square Drive Size 12.7 Mass (kg) 1
- KTC 12.7 sq. Preset type torque wrenchSquare Drive (mm) 12.7 Number of Teeth 36
- Mother Tool Pocket Digital MultimeterMulti-function type with 6000 count bar graphDimensions, Width W x Height H x Depth D (mm) 79×120×17 Mass (g) About 125 Frequency 1Hz～10MHz DC Vurrent 60mA/600mA Resistance 600Ω/6KΩ/60KΩ/600KΩ/6MΩ/60MΩ DC Voltage 600mV/6V/60V/600V Power Supply CR2023 x 1 (Built-in body) Capacitance 40nF/400nF/4μF/40μF/400μF/4000μF AC Voltage (V) 6/60/600 AC Current 60mA/600mA
- SIGNET Brake fluid testerGood or bad is judged by the amount of water in the brake oil. Since it is composed of 5 LEDs, you can grasp the status in detail. * Uses AAA (1.5V) batteries (sold separately)
- EMERSON Digital Torque WrenchEasy-to-read digital display for easy torque setting Sockets and extensions are also included! * This product is a torque wrench for tightening only. Do not use for loosening work. It may reduce the accuracy of the torque wrench or cause injury. * Be sure to take measures to prevent falling when ... Read MoreAutomatic Power Off (Display) 60 seconds Minimum Scale (Nm) 0.5 Mass of Main Unit (kg) 1.4 Specification 103Nm preset type Square Drive (mm) 12.7 Torque setting range (N.m) 40～200 Main Unit Dimensions, Width W x Depth D x Height H (mm) About 515 × 47 × 55 Case dimensions (width x depth x height) (mm) About 537 × 100 × 93 Battery Button 3V (CR2032) Accuracy (%) ±3
- SUNFLAG (SHINKI MFG) Auto Tester Pencil Tip TypeUses 6V to 24V dual-purpose balls, applicable to small to large vehicles. It can be used as a tester for disconnection tests and timing lights of internal heat engines such as automobiles and motorcycles, tail lights, turn signals, fuses, sockets, etc. For detecting the power of car batteries.Overall Length (mm) 120 Mass (g) 36 Voltage (V) 6～24 Trusco Part No. 853-2719 RoHS directive (corresponding to 10 substances) Correspondence
- NPA (Toyo Tech) Handy vacuum pumpA device that manually generates vacuum pressure. Since it can be decompressed to any pressure, it is an indispensable device for maintenance of equipment operated by vacuum pressure.Diameter (Φmm) (Meter) 50 Maximum Scale -100kPa (about 75cmHg) Minimum Scale (kPa) 2 Mass (g) About 800 Included Accessories Hose (500mm)from S$339.90Min. 2 days
- Pro-Auto Torque Wrench 3/8Ideal for tightening spark plugs and cylinder head bolts. For tightening spark plugs and cylinder head bolts. For tightening work with the specified torque.Minimum Scale (Nm) 0.1 Overall Length (mm) 275 Case Dimensions (mm) 310×70×60 Tightening Torque (Nm) 5～25 Mass (g) 600 Trusco Part No. 838-4883 Square Drive (mm[inch]) 9.5[3/8]
- MonotaRO Camber caster gaugeA gauge can be attached to the side of the wheel to read the position of air bubbles on the top of the main unit. * Do not knock it down or drop it. * Do not shake or vibrate.Measuring Accuracy (°) 0.5 Overall Length (mm) 191 Minimum Size (mm) 78 (minimum measurement)
- MonotaRO Gear set torque wrench replacement* This is a replacement gear set exclusively for Monotaro Torque Wrench MTR1-800. *Please do not use it for anything other than its intended purpose. *We recommend that you ask a company that provides repair services to replace gears. We may not be able to compensate if you perform the replacemen... Read More
- Pro-Auto Oil drain dedicated torque wrenchFor drain plug onlyMass (kg) 0.6 Overall Length (mm) 275 Tightening Torque (Nm [kgfm]) 40(4) Case Dimensions (mm) 75×310×60 Trusco Part No. 853-6071 Socket Insertion Angle (mm) 9.5
- JTC Compression tester full setMeasuring Range (kPa) 0～2100 Hose Length (mm) 440 RoHS directive (corresponding to 10 substances) Correspondence Adapter size M10×1.0・M12×1.25・M14×1.25・M18×1.5 Length (mm) Pipe adapter 190 each
- JTC Digital Depth GaugeLiquid crystal displayUnit of Measurement 0.01mm Measuring Range (mm) 0～25.4 Operating Temperature Range (℃) 0～40 RoHS directive (corresponding to 10 substances) Correspondencefrom S$53.99Min. 2 days
- Pro-Auto Torque wrench for automotive wheel nutsA dedicated torque wrench designed for tightening automobile wheel nuts with a torque value of 103 Nm. Work efficiency is improved by the ratchet mechanism. The quick release mechanism makes it easy to attach and detach the socket.Tightening Torque (Nm) 103 Square Drive (mm) 12.7 Mass (kg) 2.1 Overall Length (mm) 590 Case Dimensions (mm) 655×70×60
- JTC Brake gauge setYou can easily measure the remaining amount of brake pads. Very convenient for vehicle inspection!Overall Length (mm) 130 RoHS directive (corresponding to 10 substances) Correspondencefrom S$47.99Min. 2 days
- JTC Brake oil testerGood or bad is judged by the amount of water in the brake oil. * Cannot be used for DOT5.RoHS directive (corresponding to 10 substances) Correspondence Suitable for DOT3、4from S$78.99Min. 2 days
- KTC 9.5sq. Preset type torque wrenchNumber of Teeth 36 Square Drive (mm) 9.5from S$479.90Min. 2 days
- TONE Preset type torque wrenchYou can tell the tightening work with the torque value set in advance by the clicking sound and the feel of your hand. For tightening large vehicles, construction civil engineering, industrial machinery, shipbuilding, plants, etc. * Torque load direction is clockwise rotation only.Type Preset type Load Direction Right Material (Main Unit) Structural steel Main Application Vehicle maintenance and various machines Accuracy (%) ±3
- JTC Mighty bag* Only negative pressure cannot be pressurized.Measuring Range (kPa) (Load) 0-100 Material (Main Unit) Aluminum die-cast RoHS directive (corresponding to 10 substances) Correspondencefrom S$339.90Min. 2 days
