Lab Benches & Tables
A workbench / experimental table is a table on which objects are placed and worked when performing work or experiments. Because it is used for various tasks, safety and convenience are pursued. Many have excellent chemical resistance, heat resistance, and corrosion resistance, and are designed to ensure safe work. It is also hygienic because it is designed to be easily cleaned. Some of them are equipped with casters and can be moved safely. There is also a drawer tray so that you can easily organize the work table, so you can work while organizing.
Other Related Pages
- KENIS WorkbenchIt is an eco-model that eliminates waste and is ideal for light work. It is a simple design based on white.Type For sitting Allowable Load (kg) 150 Height (mm) 740 Material (Top Plate) Polyurethane embossed sheet
- KENIS WorkbenchIt is an eco-model that eliminates waste and is ideal for light work. Comes with a convenient half-sided shelf to improve work efficiency. The top plate finish is polyester and easy to use, and the legs have adjusters, so you can easily keep it horizontal.Type For sitting Allowable Load (kg) 150 Material (Top Plate) Polyurethane embossed sheet Height (mm) 740from S$599.90Min. 8 days
- CRAFTWORK Stainless steel clean tableAn all-stainless steel (SUS304) workbench. Since it uses a 40-square pipe and has a welded structure, it is sturdy and does not require assembly.Allowable Load (kg) 300from S$2,799.00Min. 13 days
- KENIS WorkbenchA basic workbench with a load capacity of 300 kgf.Allowable Load (kg) 300 Height (mm) 740 Length (mm) 750 Type For sitting Material (Top Plate) Polyesterfrom S$639.90Min. 8 days
- Sakae Stainless steel small workbenchThe height is 800mm, which is the same as a general workbench/sink. Perfect as an auxiliary table. Because it is made of stainless steel, it is hard to rust and has excellent chemical resistance and corrosion resistance. Hospitals, research facilities, clean rooms, etc. * Please note that chlorin... Read MoreLength (mm) 450 Opening Width (mm) 600 Mass (kg) 7 Uniform Load Capacity (kg) 75 Height (mm) 800 RoHS directive (corresponding to 10 substances) Correspondence Adjuster Resin screw diameter M8 P = 1.25 Material (Top Plate) SUS430
- ARAM Anti-vibration matIt can be easily installed and relocated just by laying it under the machine, and can be cut to an appropriate size and used as needed. It can be cut to a suitable size with a knife or scissors if necessary and used, which is very economical.from S$45.99Min. 2 days
- AS ONE Laboratory Drawer Tray SquareA group of trays that organize the drawers on the tabletop of a laboratory table, which tends to be particularly complicated, in a multifunctional manner.Dimensions, Width W x Depth D x Height H (mm) 260×350×45 Material High impact polystyrenefrom S$48.99Min. 2 days
- KENIS WorkbenchIt is an eco-model that eliminates waste and is ideal for light work. With the same height as a general counter, it is ideal for standing work.Type For standing work Allowable Load (kg) 150 Height (mm) 950 Material (Top Plate) Polyurethane embossed sheetfrom S$499.90Min. 8 days
- Thermo Fisher Scientific Safety MatIt has excellent absorbency and prevents the spread of liquid. It softens the impact between fragile instruments such as glass and the laboratory table. Uses long-fiber non-woven spunbond that is hard to slip and is durable even when wet. The polyethylene lining is chemical resistant and does not... Read MoreWater absorption (mL) 750/m2from S$119.90Min. 4 days
- AS ONE Laboratory Drawer Tray Square CombinationA group of trays that organize the drawers on the tabletop of a laboratory table, which tends to be particularly complicated, in a multifunctional manner.Dimensions, Width W x Depth D x Height H (mm) 260×350×45 As ONE Part Number 3-5340-05 Material High impact polystyrenefrom S$48.99Min. 4 days
- AS ONE Lab BenchThis is a laboratory workbench that uses the phenolic resin laminate used for the top plate of the laboratory table.from S$789.90Min. 18 days
- AS ONE Laboratory Table Drawer Tray TweezersA group of trays that organize the drawers on the tabletop of a laboratory table, which tends to be particularly complicated, in a multifunctional manner.Dimensions, Width W x Depth D x Height H (mm) 260×350×45 As ONE Part Number 3-5340-06 Material High impact polystyrenefrom S$48.99Min. 4 days
- AS ONE Laboratory Drawer Tray Square HalfA group of trays that organize the drawers on the tabletop of a laboratory table, which tends to be particularly complicated, in a multifunctional manner.Dimensions, Width W x Depth D x Height H (mm) 260×350×45 As ONE Part Number 3-5340-07 Material High impact polystyrenefrom S$39.99Min. 4 days
- AS ONE Laboratory Drawer Tray Combination HalfA group of trays that organize the drawers on the tabletop of a laboratory table, which tends to be particularly complicated, in a multifunctional manner.Dimension (mm) 260×350×45 As ONE Part Number 3-5340-08 Material High impact polystyrenefrom S$25.99Min. 4 days
- AS ONE Laboratory Drawer Tray CombinationA group of trays that organize the drawers on the tabletop of a laboratory table, which tends to be particularly complicated, in a multifunctional manner.Dimension (mm) 260×350×45 As ONE Part Number 3-5340-04 Material High impact polystyrenefrom S$48.99Min. 4 days
- KENIS Wood shelfA wagon with a brown wooden top plate. The position of the shelf board can be freely set at 25 mm intervals.Caster Diameter (Φmm) 50 nylon (with 2 stoppers) Dimension (mm) 610×460×730 Material Steel (chrome plated)from S$469.90Min. 6 days
- AS ONE Quiet Stainless Steel Work Table WT SeriesBy attaching a special sheet that absorbs sound to the underside of the top plate, unpleasant metallic noise is reduced.Allowable Load About 150kg Material Body / SUS430, sheet / special rubberfrom S$669.90Min. 16 days
- AS ONE Chemical Storage Shelves for ReplacementMaterial Steel (powder baking coating)from S$169.90Min. 9 days
- Micronic Europe B.V. Screw Cap RemoverScrew Cap Remover 96well format cap can be opened and closed easily and quickly with a little force.Quantity 10.0 As ONE Part Number 4-1087-77 Dimension (mm) 40.8×7 Specification Screw + Cap removerfrom S$58.99Min. 13 days
- Micronic Europe B.V. Micronic Inc. DecapperManual decapper for Push Cap Push Cap can be easily manually decapped.Quantity (pieces) 10 As ONE Part Number 4-1087-83 Dimension (mm) 57×50×11 Specification Manual decapper for Push + Cap Suitable Cap Push Capfrom S$119.90Min. 4 days
- KETER Low Cabinet Moby Chest Dark Gray 9763 100 SeriesIt uses a material that is not easily deteriorated by ultraviolet rays, and is suitable for storage outdoors or near windows.Dimension (mm) 1180×490×550 Capacity 300L Color Dark gray Material PPfrom S$279.90Min. 18 days
- Heathrow Scientific PCR Cooler 96 Well 2 PcsKeep the 96-well plate at 0 ° C for 1 hour. Keep the sample temperature below 5 ° C for 3 hours without the lid. If the temperature exceeds 6 ° C, the color will change. The lid can be used as a stand by turning it over by sliding it to remove the lid from the rack.Suitable Tubes (mL) 0.2、0.5 Capacity (mL) 110×148×48 Number of Well 96 Material Rack / PP, lid / polycarbonatefrom S$219.90Min. 4 days
- AS ONE Anti-vibration table RASK RTS seriesSuitable for vibration isolation tables for balances (precision balances), optical microscopes, other measuring instruments, and precision instruments. It has a sparse-dense-sparse three-layer structure, and quickly absorbs vibration and converts it into heat. It is a structure that uses a unique... Read MoreAs ONE Part Number 4-4564-02from S$1,799.00Min. 5 days
- TECHSUS Jikao Khan All stainless steel plate with adjustment JO seriesAll parts except for the adjustment part and caster part are made of SUS304, so it can withstand rust and dirt and can be used cleanly. Since it is a finished product, there is no assembly work, and it can be used immediately after installation. Please use it to prevent direct placement of produc... Read MoreSpecification (Deck part) SUS304-1.0t Load Capacity (kg) 200 Level Adjusters SUS bolt (M12XP1.75) made of nylonfrom S$599.90Min. 10 days
- CRAFTWORK Stainless steel clean tableAn all-stainless steel (SUS304) workbench. Since it uses a 40-square pipe and has a welded structure, it is sturdy and does not require assembly. The R top plate is also easy on the abdomen during work.Allowable Load (kg) 300from S$2,799.00Min. 13 days
- YAMATO SCIENTIFIC Storage case Turntable typeA workstation ideal for organizing and storing various small products used in the laboratory. The workstation material is PVC (polyvinyl chloride), which has excellent acid resistance, alkali resistance, flame retardancy, and water resistance. 360 degree rotation type. * Various containers and ac... Read MoreMaterial PVC (polyvinyl chloride)from S$639.90Min. 49 days
- AS ONE Ductless Fume Hood Tolerability Working Top Plate DL-6CSAs ONE Part Number 3-4425-41 Allowable Load 30kg (when installed on the main body) Outer Dimensions (mm) 570×680×6 Material Phenolic resin laminatefrom S$249.90Min. 20 days
- AS ONE Desktop Air Suspension Vibration Isolator AVT SeriesSpecific Vibration Frequency (Hz) 2.5 Included Accessories Hand pump Material (Top Plate) Steel plate SPCCfrom S$1,899.00Min. 13 days
- NARIKA Gas stove set for science experiments ST2A set of gas stove and gas cylinder for science experiments.Heating Capacity (kcal/h) Maximum: Approximately 600 Type of Ignition Piezoelectric ignition method Suitable Gas butane gasfrom S$139.90Min. 7 days
- Tokyo Glass Kikai (TGK) WorkbenchIt is a bolt-fixed type, and the mounting position of the drainboard can be adjusted.Uniform Load Capacity (kg) 240 Material Stainless steel (SUS430)from S$389.90Min. 11 days
- NABEYA Desktop Low-Floor Anti-Vibration Table VLS3045 SeriesSuitable for precision equipment that dislikes vibration. It is a high damping type and is suitable for equipment that requires establishment such as hardness testing machines. You can easily adjust the level with the dial.Height (mm) (Equipment installation) +16 Dimension (mm) (Vibration isolation table) +300 x 450 Mass (kg) 8.8 RoHS directive (corresponding to 10 substances) Correspondencefrom S$1,599.00Min. 13 days
- NABEYA Anti-vibration table VPG seriesHorizontal adjustment is easy with the adjustment dial operation. The HD type is a high-attenuation type, and is suitable for devices such as hardness testers, which require stability.Adjustment Range (mm) (level) +5 Mass (kg) 13.8 Thickness of Shorter Rule (mm) 30 Size (mm) 450×350×69~79from S$1,599.00Min. 16 days
- NARIKA Gas stove set for science experiments KFST2A set of a gas stove for science experiments, a gas cylinder, and a dedicated storage stand that is convenient for storage.Heating Capacity (kcal/h) Maximum: Approximately 600 Type of Ignition Piezoelectric ignition method Suitable Gas butane gasfrom S$189.90Min. 7 days
- AS ONE Chemical Storage KS SeriesThe structure of the key cannot be removed unless it is locked, preventing you from forgetting to lock the key.Number of Shelves (pieces) 1 As ONE Part Number 2-9176-11 Key 3-point lock Outer Dimensions (mm) Approximately 500 x 380 x 880 Material Steel (powder baking coating)from S$689.90Min. 9 days
- KETER Plastic Cabinet XL GARAGEA high load-bearing type with a load-bearing capacity of 45 kg. It has a depth of 540 mm and has a large capacity. The door has a hole for attaching the key (key sold separately).Allowable Load (kg) 45from S$459.90Min. 13 days
- AS ONE Gradnel Storage CaseOuter Dimensions (mm) 285×430×32 As ONE Part Number 4-5347-11 Material PP (polypropylene)from S$33.99Min. 4 days
- NARIKA Gas stove storage stand for science experiments KR-1NStorage stand for gas stove for science experimentsDimension (mm) 280 x 205 x 140 (including protrusions) Material Iron (Unichrome plating)from S$48.99Min. 5 days
- Heathrow Scientific 4way Test Tube Rack 5 PcsIt can be used for Φ13mm and Φ17mm test tubes.Dimension (mm) 232×70×95 As ONE Part Number 4-1837-01 Color Blue / purple / green / red / clear Material PPfrom S$199.90Min. 4 days
- AS ONE Chemical Storage Cabinet KS SeriesThe lot stick will not open the door even if the lock is destroyed. The structure of the key cannot be removed unless it is locked, preventing you from forgetting to lock the key.Key 3-point lock Material Steel (powder baking coating)from S$769.90Min. 9 days