Laboratory Stand Assembly
A prefabricated mount is one of the instruments used in scientific research and laboratories. It can be placed on a test bench and attached to experimental equipment and glassware to conduct research and experiments. There are stand types that can be used by adding a base as is, sets that have parts, and systems that can be freely assembled by adding parts. There are frame bars, columns, bolt screws, bases to prevent them from falling down, equipment to which the bases are attached, and anti-earthquake brackets.
KENIS Tightening Bracket● Small size and light weight, so it does not interfere with the mounting position if it is fixed on the table. ●ALJ has two posts, so it can be fixed not only to the top plate in the horizontal direction but also to the vertical direction.Suitable Bit Shank Diameter (Φmm) 13 Material Aluminum die casting Tightening Range (mm) ～55from S$38.99Min. 2 days-
- KENIS Attachment for Unit Stand● The connecting base is the base of the unit stand. Mount the pipe fixture provided in the groove in the center, and stand the column. ● The intermediate stabilizing table supports and stabilizes the assembly bars to be assembled on a desk or the like.Applicable Pipe Outer Diameter (Φmm) 13from S$12.99Min. 2 days
-
- KENIS Pipe CouplerA tightening bracket that fixes the intersection of assembly pipes.from S$12.99Min. 2 days
-
- KENIS Unit standIt is an all-stainless steel unit stand including columns, bases, and connectors. A square pipe is used for the cross member. Since fixtures such as clamps do not rotate, damage accidents can be prevented. Two stainless steel muffs for both rounded corners are included, so you can use your existi... Read MoreType doublefrom S$1,199.00Min. 11 days
- KENIS Stainless pipeIncluded Accessories Pipe cap Material Stainless steel SUS304from S$8.49Min. 4 days
-
- Tokyo Glass Kikai (TGK) Fine coupling bolt screwTightening range: Approximately 8 to 13ΦRemark Bolt screw TGK Part No. 350-54-65-02from S$9.99Min. 25 days
- TERAOKA (ANEX) Stainless steel system stand base stopper SUB999It is a part for fixing the prefabricated stainless system stand on the floor or the laboratory table. Please be sure to use it to use the stand safely. (Fixing screws are not included)Mass (g) 32.0 Trusco Part No. 413-9283 Material Stainless steel (SUS304)from S$38.99Min. 32 days
- AS ONE Unit StandAs ONE Part Number 1-7217-01 Dimension (mm) 1000×1000 Shaft Diameter (Φmm) 13 Stand 600mm×140mmfrom S$599.90Min. 13 days
- Tokyo Glass Kikai (TGK) Round tableHydronalium alloy It has excellent acid resistance compared to conventional products, and is lightweight and durable.TGK Part No. 0437-55-08-11 Suitable Pipe Diameter (Φmm) 13 Diameter (Φmm) 65 Color Blackfrom S$19.99Min. 11 days
-
- SANSYO Compact unitA lightweight and compact unit stand that does not take up space. The pedestal part can be fixed and it can be used safely.Dimensions, Width W x Depth D x Height H (mm) 500×415×800 Material SUS304, connecting stand:from S$469.90Min. 9 days
- TERAOKA (ANEX) Stainless steel system stand SUS-900By adding pipes and muffs, you can create various variations of assembly stands. It helps prevent rusting in laboratories and laboratories and keeps the aesthetics of the room.Height (mm) 1000 Mass (kg) 11.7 Trusco Part No. 413-9666 Length (mm) 437 Width (mm) 900 Size Medium Material Stainless steel (SUS304)from S$1,999.00Min. 32 days
- SANSYO Stainless steel assembly standWith adjusterDimensions, A x B (mm) 585×355 Pillar Width (mm) Φ12×1000from S$259.90Min. 9 days
- Tokyo Glass Kikai (TGK) All stainless steel stand (SUS)All finished with stainless steel SUS304. When fixing the base to the laboratory table, please use the special metal fittings (not including screws).from S$1,999.00Min. 6 days
- SANSYO Sunken rackSince the main body is rotatable, the equipment can be taken in and out smoothly. It is a net type and can be used on both sides. Can be stored efficiently. If you use a saucer, you can also use it as a dry stand. The parts that come into contact with the equipment are coated with highly chemical... Read MoreDimensions (Width W x Height H) (mm) 400×568from S$299.90Min. 9 days
-
- Tokyo Glass Kikai (TGK) Assembly baseType Type B TGK Part No. 0437-55-03-10from S$1,299.00Min. 23 days
-
-
- SANSYO Stainless steel assembly standPlease use the frame bar of Φ13mm standing at the four corners.Dimensions, A x B (mm) 665×355from S$299.90Min. 9 days
- SANSYO SS type system standA multi-purpose experimental stand consisting of a base SSB, a pipe, a C-shaped muff, and a sliding diagonal reinforcement rod.from S$1,399.00Min. 9 days
-
- Tokyo Glass Kikai (TGK) Fine stand fastener vise typeLike the upper part of the image, there is a hole in the lower part so that it can be bolted.Upper hole diameter (Φmm) 16 Mass of Main Unit (g) About 1300 Material Steel baking finish Dimension (mm) W95×H148from S$279.90Min. 25 days
- Tokyo Glass Kikai (TGK) Fine assembly type standAs a universal assembly type pedestal in the laboratory, a pedestal of any shape and dimensions can be installed on the laboratory table, on the floor, or on the wall surface according to the purpose. We also have a wide range of necessary parts and various accessories.from S$1,299.00Min. 25 days
- SANSYO Stainless system standA beautiful, lightweight, sturdy, durable and corrosion resistant stand.Type Single type Material SUS304from S$1,799.00Min. 9 days
- Tokyo Glass Kikai (TGK) Fine prop SUS304 male screw type Φ12 × 1500mmOuter Diameter (Φmm) 12 Length (mm) 1500 Included Accessories Male screw, nut, washer Material Stainless steel (SUS304)from S$59.99Min. 18 days
- TERAOKA (ANEX) Stainless system stand S-600By adding pipes and muffs, you can create various variations of assembly stands. It helps prevent rusting in laboratories and laboratories and keeps the aesthetics of the room.Mass (kg) 10.7 Height (mm) 1000 Trusco Part No. 413-9658 Length (mm) 437 Width (mm) 600 Size S Material Stainless steel (SUS304)from S$1,799.00Min. 32 days
- Tokyo Glass Kikai (TGK) Fine round table 70mmSpecification With 3 set screws TGK Part No. 350-54-63-01 Diameter (Φmm) 70from S$27.99Min. 25 days
- SANSYO Assembled stand baseMass (kg) 1.8 Material Casting (for chemical coating)from S$86.99Min. 9 days
- Tokyo Glass Kikai (TGK) Seismic bracket for system standAll finished with stainless steel SUS304. When fixing the base to the laboratory table, please use the special metal fittings (not including screws).TGK Part No. 561-55-17-04from S$38.99Min. 6 days
- Tokyo Glass Kikai (TGK) Fine assembling base IIType Type II set TGK Part No. 350-54-60-12from S$1,999.00Min. 25 days
- Tokyo Glass Kikai (TGK) Fine assembly type frame ITGK Part No. 350-54-60-11 Type Type I setfrom S$1,299.00Min. 25 days
- Tokyo Glass Kikai (TGK) System standThe system stand can be assembled as an experimental stand according to the purpose by combining various parts. A stand designed for assembling glass equipment. Since it has the potential to develop as a system, it is possible to assemble a device of any shape and size simply by adding parts. The... Read Morefrom S$1,399.00Min. 6 days
- Sanwa Kaken Kogyo Sanken Rack SC Flask SetType Sanken Rack Made of iron / resin coatingfrom S$499.90Min. 11 days
- Tokyo Glass Kikai (TGK) Fine foot stand 5 holes Floor dimensions 340mm x 50HThere are 5 receiving holes.Platform Dimensions (mm) 340×H50 Hole spacing (mm) 62 Mass of Main Unit (g) About 1500 Material Steel baking finish Pillar Diameter (Φmm) Up to 13 possiblefrom S$219.90Min. 25 days
- Tokyo Glass Kikai (TGK) Fine universal stand 5 holes Floor dimensions 580mm x 190HThere are 5 receiving holes. The strut diameter can be up to Φ13 mm.Bottom Diameter (mm) 38.6mm Platform Dimensions (mm) 580×H190 Hole spacing (mm) 98-136-136-98 Mass of Main Unit (g) About 9500 Material Steel baking finish Pillar Diameter (Φmm) Up to 13 possible Specification ● Depth inside the bottom: 95mmfrom S$759.90Min. 25 days
