The union joint consists of a main body, sleeve and nut, and the tube can be easily attached by simply tightening the nut. When using a soft tube, insert the inner tube into the soft tube and then tighten the nut.
The union joint consists of a main body, sleeve and nut, and the tube can be easily attached by simply tightening the nut. When using a soft tube, insert the inner tube into the soft tube and then tighten the nut.
Simply insert the tube into the nut set on the fitting body until it hits the stopper, and tighten the union nut to achieve the specified performance. Has excellent chemical resistance.
Continuous Use Temperature (℃) -15～150 Maximum Operating Pressure (MPa [kgf/cm 2 ]) 1mm thick tube (25 ℃) / 1 [10] Suitable Fluid Most acids, alkalis, solvents
I type tube connection joint.
For liquid delivery
* The standard is F-lock seal specifications, but there is also an abacus ball specification, so please contact the manufacturer.
Suitable Tube Outer Diameter (Φmm) 1/4 Material PFA/PTFE Trusco Part No. 735-0180 Shape Straight union Mass (g) 20
The union joint consists of a main body, sleeve and nut, and the tube can be easily attached by simply tightening the nut. When using a soft tube, insert the inner tube into the soft tube and then tighten the nut.
The union joint consists of a main body, sleeve and nut, and the tube can be easily attached by simply tightening the nut. When using a soft tube, insert the inner tube into the soft tube and then tighten the nut.
I type tube connection joint.
For liquid delivery
* The standard is F-lock seal specifications, but there is also an abacus ball specification, so please contact the manufacturer.
Shape Straight union Trusco Part No. 735-0201 Mass (g) 20 Suitable Tube Outer Diameter (Φmm) 1/2 Material PFA/PTFE
Regular Pressure (MPa) 0.98 Maximum Pressure (MPa) 3.43 Material Brass (nickel plated) Specification L type flared union Suitable Fluid Oil, water, air, etc.
Compact and lightweight. Non-grease, steam can be used. Compliant with the Food Sanitation Law. The parts material has passed the equipment and container packaging standard test.
* Please check the compatible tube separately. * Since leakage is not zero, avoid using it in a vacuum holding such as... Read More
Working Pressure Range -100MPa～1MPa Ambient and Flowing Fluid Temperature (℃) -5 to 150 (without condensation) * 3 Assured Pressure Resistance (MPa) 3.0 Suitable Fluid Air, water, steam
Used for connecting fluororesin tubes. The standard is the F lock seal specification, which can be replaced with an abacus ball. The F-lock seal can be used by grooving the outside of the tube with an optional grooving cutter. It can be firmly fixed without a grooving cutter, but the pressure res... Read More
It is an I type joint. (Male screw x tube connection joint. The W ferrule type joint has a withstand voltage of up to 0.8Mpa at room temperature. It is designed to have low flow resistance so that the liquid can flow smoothly. As for the sealing method, the ferrule acts as a double seal by tighte... Read More
Screw size 1/2 Connector Thread 1/2 Orifice Diameter (Φmm) 10 Suitable Tube Outer Diameter (Φmm) 12 Suitable Outer Diameter (Φmm) 12Φ Mass (g) 20 Trusco Part No. 735-1861 Material CTFE/PTFE、CTFE
It is an I type joint. (Male screw x tube connection joint. The W ferrule type joint has a withstand voltage of up to 0.8Mpa at room temperature. It is designed to have low flow resistance so that the liquid can flow smoothly. As for the sealing method, the ferrule acts as a double seal by tighte... Read More
Mass (g) 20 Connector Thread 3/8 Screw size 3/8 Orifice Diameter (Φmm) 4 Suitable Tube Outer Diameter (Φmm) 6 Suitable Outer Diameter (Φmm) 6Φ Trusco Part No. 735-1801 Material CTFE/PTFE、CTFE
I type tube connection joint.
For liquid delivery
* The standard is F-lock seal specifications, but there is also an abacus ball specification, so please contact the manufacturer.
Suitable Tube Outer Diameter (Φmm) 3/4 Material PFA/PTFE Shape Straight union Trusco Part No. 735-0210 Mass (g) 20
Fujikin LOK Tube Fittings Male ConnectorsSimply insert the tube and tighten the nut for easy connection. For connection with ISO standard / NPT standardMaterial Stainless steel (ASTMF316) Type half Union
