Freezing Containers
A freezing container is made of synthetic resin specially processed in a storage case for cold storage. We made minus storage possible for glassware, which was considered difficult in the past. The freezing container is divided into a main body, a divider and a lid. By changing the partition or changing the recombination, it supports bottles of various shapes. Containers can be stacked for functional storage. Some types are compatible with temperatures ranging from minus 85 ℃ to 131 ℃.
Other Related Pages
KENIS Freeze Box (Waterproof Enhanced Type)● Freeze box with higher strength than cardboard. Even if frost or ice adheres to the product and water is absorbed, the strength of the product is less likely to decrease.Suitable Tubes (mL) 1.2～2.0 Hole Size (mm) 12×12- AS ONE Cryo Freezer BoxComes with a freeze box drawer sticker. Uses water resistant paper that does not deteriorate even when stored at ultra-low temperatures. The internal partition is a double type and can be held securely.Applicable tube size (ml) 1.5～2.0 Included Accessories 10 drawer stickers Seat Post Diameter (Φmm) 10～12 Material Waterproof paper
- AS ONE Azlab Freezer BoxComes with a drain that is convenient when using liquid nitrogen. Uses water resistant paper that is durable against storage at ultra-low temperatures. There is a drain on the bottom, so it doesn't take much time to open it.Suitable for Tube diameter: maximum Φ12.5mmfrom S$67.99Min. 2 days
- KENIS Freezer rack● This box is convenient for storing and transporting 1.5 mL microtubes. ● Numerals and alphabets are attached to the outer frame, making sample management easy.Number of Tubes / Cylinders 50 pieces Dimension (mm) 71×153×54 Sterilizing Autoclavable Material PPfrom S$24.99Min. 2 days
-
- NICHIDEN RIKA GLASS (NEG) Freezing container FCFunctionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.from S$35.99Min. 2 days
- KENIS Freeze Rack●1.5/2.0 mL microtube cryopreservation rack. ● Available in liquid nitrogen. The rack and lid have drain holes and no liquid nitrogen remains in the rack when removed. ● Coordinate numbering is used to make it easy to arrange and confirm the tubes.Sterilizing Autoclavablefrom S$24.99Min. 2 days
- KENIS Freeze box● Cool-resistant, water-resistant paper that can be used in deep freezers.from S$19.99Min. 2 days
- NICHIDEN RIKA GLASS (NEG) Freezing container body BFunctionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Dimension (mm) 115×190×55H TGK Part No. 717-04-30-42 Type Body B Suitable Partitions For FC-1, 2, 3, 5, 09from S$16.99Min. 2 days
- KENIS Plastic freeze boxFreezing at ●-90℃ and autoclave sterilization (121℃) are possible. ● The lid is translucent, so you can check while the lid is held. ● Numerals and alphabets are attached to the outer frame, and sample position control can be easily performed. ●PB lids are hinged. ●The cover of the FP is a co... Read MoreSterilizing Autoclavable Color Natural yellow Material PPfrom S$27.99Min. 2 days
- NICHIDEN RIKA GLASS (NEG) Freezing container lid FC-CFunctionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Suitable Model (All except FC-4 and FC-6) Dimension (mm) 120×193×20H TGK Part No. 717-04-30-14 Type FC-C lidfrom S$15.99Min. 2 days
- NICHIDEN RIKA GLASS (NEG) Freezing container body CFunctionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Dimension (mm) 190×230×80H TGK Part No. 717-04-30-33 Type Body C Suitable Partitions FC-4 onlyfrom S$27.99Min. 2 days
-
- SANSYO For freeze box 5ml25 hole type for 5.0 ml tube. Paper box / paper partition (fully waterproof and cold resistant paper). The paper box is made of completely waterproof paper, so it repels water droplets. It is hard to get frost and can be easily removed by hand. You can write with a ballpoint pen or oil-based pen.Allowable Low Temperature (℃) -80 Hole Diameter (Φmm) 17 Dimensions, Width W x Depth D x Height H (mm) 135×135×68from S$64.99Min. 2 days
- Thermo Fisher Scientific Freeze boxThe freeze box is made of a very strong special paperboard that can withstand extremely low temperatures. There are 25/50/81/100 stands for 1.2 and 2 ml tubes, 81/100 stands for 4 ml tubes, and 100 stands for 5 ml tubes.from S$229.90Min. 2 days
- KENIS Freeze boxAlphabets and numbers are attached to both the box and lid, making it easy to manage the position of the sample.Suitable for 1.5 / 2.0mL microtube Dimension (mm) 132×132×53 Number of Tubes / Cylinders 81(9×9) Material Paper (surface coated)from S$89.99Min. 2 days
- AS ONE Azlab Freezer BoxOperating Temperature Range (℃) -196～121 Suitable Tubes (mL) 0.5 / 1.5 / 2.0 x 25 As ONE Part Number 2-901-01 Outer Dimensions (mm) 75.7×75.7×53 Material PC (polycarbonate)from S$58.99Min. 2 days
- AS ONE Freeze BoxSince it is an international size, it is suitable for many rack systems. It is durable even at ultra-low temperatures.Dimensions, Width W x Depth D x Height H (mm) 134×134×47 Material Wax paper Suitable Tube Φ10～12mmfrom S$229.90Min. 4 days
- AS ONE Cool RackAs ONE Part Number 2-4119-06 Type For 50ml centrifuge tubesfrom S$359.90Min. 4 days
- SANSYO Cool workKeep below -15 ℃ for a long time (about 2 hours). Protects valuable frozen samples from elevated temperatures during work on the table. Just put it in the freezer as it is from the freezer, and after the work is finished, just put it in the freezer. It is compact in size and does not take up stor... Read MoreAllowable Low Temperature (℃) -80 Hole Diameter (Φmm) 11.5 Dimension (mm) 120×100×66 Depth (mm) 39from S$119.90Min. 2 days
- KENIS Reversible rack● A convenient microtube rack that can be used on both sides. ● One side can be used for 0.5 mL and the other side can be used for 1.5/2.0 mL.Number of Tubes / Cylinders 0.5mL × 96 or 1.5 / 2.0mL × 96 Dimension (mm) 210×112×27 Sterilizing Autoclavable Material PPfrom S$33.99Min. 2 days
- KENIS Iso freeze rackA rack whose color changes from bluish purple to pink when the temperature rises above 7 ° C. Since it can hold 0-4 ° C for 3 hours or more, it is ideal for PCR and enzyme / cell experiments that are sensitive to temperature changes. Can be stacked with a lid.Number of Tubes / Cylinders 0.2 mL x 96) 96-well PCR plate x 1) Dimension (mm) 99×141×44from S$89.99Min. 2 days
- SANSYO Freeze box 100 holesFreeze box for partition, 100 hole type 2.0ml / 1.5ml tube.Hole Diameter (Φmm) 14 Dimensions, Width W x Depth D x Height H (mm) 150×150×52.2from S$279.90Min. 2 days
- SANSYO For freeze box 15mlFreeze box for 15ml tubes. Paper box / paper partition (completely waterproof and cold resistant paper), 49-hole type. The paper box is made of completely waterproof paper, so it repels water droplets. It is hard to get frost and can be easily removed by hand. You can write with a ballpoint pen o... Read MoreHole Diameter (Φmm) 21 Dimensions, Width W x Depth D x Height H (mm) 168×168×130from S$199.90Min. 2 days
- NICHIDEN RIKA GLASS (NEG) Freezing container divider # 3Functionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Type No.3 middle partition TGK Part No. 717-04-30-53 Suitable Model All types except FC-6from S$17.99Min. 5 days
- SANSYO Freeze box 12 holesThe paper box is made of completely waterproof paper, so it repels water droplets. It is hard to get frost and can be easily wiped off by hand. You can write with a ballpoint pen or oil-based pen. It has a structure that allows the inside of the box to have a margin and prevents the tubes from ov... Read MoreStandard 1.5/2.0ml×12 Dimensions, Width W x Depth D x Height H (mm) 48×88×49 Allowable Low Temperature (℃) -80from S$129.90Min. 6 days
- SANSYO For freeze box 50mlFreeze box for 50ml tubes. Paper box / paper partition (completely waterproof and cold resistant paper), 16-hole type. The paper box is made of completely waterproof paper, so it repels water droplets. It is hard to get frost and can be easily removed by hand. You can write with a ballpoint pen o... Read MoreHole Diameter (Φmm) 31 Dimensions, Width W x Depth D x Height H (mm) 147×147×123from S$199.90Min. 5 days
- NICHIDEN RIKA GLASS (NEG) Freezing container divider # 2Functionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.TGK Part No. 717-04-30-52 Suitable Model All types except FC-6 Type No.2 middle partitionfrom S$17.99Min. 2 days
- KENIS Freeze rackA rack that can be stored at -190 ° C and autoclaved (121 ° C). The lid is transparent and the contents can be easily checked. Comes with a coordinate number that makes it easy to organize and check the tubes.Sterilizing Autoclavable Material PCfrom S$15.99Min. 4 days
- NICHIDEN RIKA GLASS (NEG) Freezing container divider # 1Functionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.TGK Part No. 717-04-30-51 Suitable Model All types except FC-6 Type No.1 middle partitionfrom S$17.99Min. 2 days
- SANSYO Freeze box 100 holesPlastic box / plastic partition, 100 hole type. Stackable because there are claws on the four corners of the lid. It cannot be autoclaved. Since the cover is charcoal gray, it has a light-shielding property. For 1.5 and 2.0 ml tubes.Dimensions, Width W x Depth D x Height H (mm) 145×145×52 Hole Diameter (Φmm) 12 Material Partition: ABS, Box: ASfrom S$149.90Min. 6 days
- SANSYO Paper freeze rackMade of water-repellent cardboard and lightweight. Can be efficiently stored in the freezer. It is cheaper and more economical than stainless steel ones. It is safe because it does not easily cause low-temperature burns even if you touch it by mistake. Ideal for storing the Freeze Box SFB series.... Read MoreAllowable Low Temperature (℃) -80 Allowable Load (kg) 15 Material (Handle) Polypropylenefrom S$139.90Min. 6 days
- NUNC Freeze BoxIt is made of a special paperboard that is extremely strong and can withstand extremely low temperatures.from S$229.90Min. 4 days
- Thermo Fisher Scientific Mr. FrostyA container that can be repeatedly frozen at -1 ° C / min, which is ideal for freezing cells. Simply put 100% isopropyl alcohol in a container and store in the freezer. Since the vial is stored in the holder, it will not come into contact with alcohol and cause contamination or the label print wi... Read Morefrom S$299.90Min. 9 days
- SANSYO Freeze box 81 holesPlastic box / plastic partition, 81 hole type. Stackable because there are claws on the four corners of the lid. It cannot be autoclaved. Since the cover is charcoal gray, it has a light-shielding property. For 1.5 and 2.0 ml tubes.Hole Diameter (Φmm) 12 Material Partition: ABS, Box: AS Dimensions, Width W x Depth D x Height H (mm) 131×131×52from S$149.90Min. 2 days
- NICHIDEN RIKA GLASS (NEG) Freezing container lid FC-WFunctionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Dimension (mm) 196×237×20H TGK Part No. 717-04-30-20 Suitable Model FC-4、FC-6 Type FC-W lidfrom S$69.99Min. 5 days
- NICHIDEN RIKA GLASS (NEG) Freezing container body AFunctionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Dimension (mm) 115×190×45H TGK Part No. 717-04-30-32 Type Body A Suitable Partitions For FC-07, FC-08Nfrom S$16.99Min. 6 days
- NICHIDEN RIKA GLASS (NEG) Heat and cold resistant container FOC-1Can be used in autoclaves and ultra-low temperature freezers (-85 ° C to 131 ° C). It has excellent heat resistance and can be autoclaved. (131 ℃, 120 minutes) ・ The transparent container makes the contents clear at a glance, improving the efficiency of research. It can be stored in the freezer ... Read MoreDimension (mm) 115×190×55 Number of Cells 16 Number of Partitions (pieces) 60 TGK Part No. 717-04-30-21 Product Name Set (without lid) FOC-1from S$64.99Min. 5 days
- NICHIDEN RIKA GLASS (NEG) Freezing container divider # 08Functionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Type No.08 Middle partition TGK Part No. 717-04-30-58 Suitable Model All types except FC-6from S$17.99Min. 5 days
- NICHIDEN RIKA GLASS (NEG) Freezing container divider # 07Functionally stored to improve work efficiency. The penetration rate that boasts the No. 1 track record. Made of special synthetic resin, it can be used up to freezing resistance (-75 ℃). Since the partition can be removed, parts can be added and combined freely. It can also be stacked.Type No.07 Middle divider Suitable Model All types except FC-6 TGK Part No. 717-04-30-57from S$17.99Min. 5 days
