Stirring / Pulverizing / Mixing Related Products
Stirring / pulverization / mixing refers to equipment, tools and accessories used for stirring solutions, crushing and mixing objects. In order to obtain the desired product, including preparation of reagents, chemical and medical research and educational institution experiments require work such as stirring and crushing. The magnetic stirrer can be used not only for stirring but also for maintaining a constant number of revolutions and heating. Stirring bars are made of orthodox glass, made of Duracon, which is highly resistant to chemicals, heat and oil, and disposable polystyrene. Various shapes of rotor (stirrer) can be selected.
Other Related Pages
- AS ONE Mini Test Tube MixerIt is an ultra-compact, variable rotation speed, 2-way power supply type authentic school. It is a compact type that fits in the palm of your hand and does not take up space. It can be used for mixing tubes and various test tubes. Touch start type and continuous operation mode can be selected. Yo... Read MoreAs ONE Part Number 2-925-01 Orbit diameter (mm) 3 Dimension (mm) 72×88×82 Mass (kg) About 0.35 Motor Output (W) About 0.6 Cable Length (m) About 2from S$259.90Min. 2 days
- AS ONE Pencil MixerThe powerful motor expands the work range. Samples can be easily homogenized using a 1.5 mL microtube. * Generator shaft for 1.5 ml microtube is not included.Included Accessories 1 stirrer rod, 2 types, 1 type each As ONE Part Number 1-229-02 Shaft Length (mm) 115 Motor Rotation Speed (min -1 [rpm]) No load 7000rpm Shaft Diameter (Φmm) Shaft / 3, Tip / 8 Power Supply Uses two AA batteries Main Unit Dimensions (mm) Φ20×172
- Nissin Rika Cordless small shakerA small shaker that can be used with both AC / DC power supplies. The battery is 4 AA batteries and can be used for continuous operation in a day. It can also be used in a refrigerator or incubator at 37 ° C. The M101 and M201 plates are the size of a 150mm x 100mm microplate. The M301 is 150 mm ... Read Morefrom S$959.90Min. 2 days
- Leona Stirring Impeller Disk TurbineIf it is a Φ8mm shaft, it can be fixed at any position and used.from S$8.49Min. 6 days
- IKA Small magnet stirrerA small palm-sized stirrer. ● Uses a brushless motor and has a long life.Motor DC brushless motor
- SIBATA SCIENTIFIC TECHNOLOGY Stirring Blade Set for M Type・It is an optional replacement blade for the propeller type dedicated to the stirrer M series.・If it is a Φ8mm shaft, it can be fixed at any position and used.・It is used for stirring general-purpose liquids. - Since it has a boss, it can be fixed at any position on the stirring bar with a set... Read MoreBlade Diameter (mm) (F-40)Φ40、(P-60)Φ60、(DF-70)Φ70、(T-80)Φ80from S$38.99Min. 33 days
- DLAB Magnetic Stirrer MS-P SeriesThe top plate is made of nylon and glass fiber with excellent chemical resistance. IP42 dustproof and waterproof structure. It has excellent durability due to the adoption of a brushless motor.Mass (kg) 1.8 Main Unit Size (mm) 150×260×80 Power Input (V) AC100~240(50/60Hz) Motor Brushless motor Dust / Water Protection IP42 Material (Plate) Nylon + glass fiber Included Accessories Rotor (Φ8 x 50mm) x 1 Capacity (L) Stirring: 3 Plate dimensions (Φmm) Φ135from S$339.90Min. 4 days
- DLAB Tube RotatorThere are 3 sizes of holders that can be used for many purposes.from S$899.90Min. 13 days
- SMT Process homogenizerIt is a popular device that realizes a low price while having a full range of functions such as a timer. The material of the wetted parts is SUS304, and the cutter can be easily attached and detached, so sterilization can be performed easily.Rotational Speed (min -1 [rpm]) MAX18000 Mass (kg) About 6 Motor (W) 100 timer 15 minutes and continuous Outer Dimensions, Width W x Depth D x Height H (mm) 250×250×396 Power Supply AC100V 50/60Hz 3A Type of Control Thyristor control methodfrom S$2,999.00Min. 9 days
- FLON INDUSTRY PEEK screw parts for PTFE jet type stirring bladesRod Diameter (mm) For 8 Type F-4105-06 TGK Part No. 803-17-66-06from S$149.90Min. 7 days
- Sieve Factory Iida Test Sieve SUS Spread Type Φ100mm Depth 43mmInner Diameter (Φmm) 100 Depth (mm) 43from S$129.90Min. 36 days
- IKA Lab DancerMinimum design test tube shaker. Start with touch start (automatic start by pressing the touch part with a test tube and applying a load). The perfect smart design for the lab. For test tubes up to 30 mm in diameter, other centrifugal tubes, and Eppendorf tubes. Fixed type with a rotation speed o... Read MoreAllowable humidity (%) (Around) 80 Mass (kg) 0.55 Motor Output (W) 0.8 Motor input (W) 1.2 Rotational Speed (min -1 [rpm]) 2800 (fixed) Orbit diameter (mm) 4.5 allowable swing amount 50 mL maximum (per test tube) Allowable Ambient Temperature (℃) 5~40 Power Supply AC100V 50/60Hz Protection Class IP40(DIN EN 60529) Swinging form rotary Dimension (mm) Φ100×70from S$499.90Min. 4 days
- AS ONE Stainless Steel Mill JarWith silicone rubber packingAs ONE Part Number 1-3951-03 Type 3000mLfrom S$669.90Min. 13 days
- CC Mark (Nikkato) Alumina balls HD seriesHas excellent wear resistance.Dimensions, Diameter x Height H (Φmm x mm) 12.7×12.7 Spiral wear rate (ppm / h) 180 Density 3.6g/mL Fracture Toughness 3.7MPa√m As ONE Part Number 61-0161-77 Chemical Composition Al2O3/93%、SiO2/5% Material Alumina Type Cylinder shape HD-127from S$39.99Min. 5 days
- AS ONE Bead CrusherAs ONE Part Number 1-2958-01 Power Cable (m) 1.8 3P with ground Mass (kg) 5 Power Supply AC100V 50/60Hz Model Number BM-1S Display Format Digitalfrom S$2,499.00Min. 13 days
- Sieve Factory Iida Test Sieve SUS Separate Type Optional Product for Φ500mmMaterial Stainless steel (SUS304)from S$329.90Min. 66 days
- SANSYO Heavy-Duty orbital shakerMaximum allowable weight 16 kg. With abundant options sold separately, it can be used for various purposes. Stable shaking is possible by microprocessor control. The speed and timer can be set in 1 to 10 steps with the adjustment dial. Can be used in an incubator, in a refrigerator, or in a CO 2 ... Read Moretimer 1 to 120 minutes Orbit diameter (mm) 19 Mass (kg) 22.2 Speed 25~500rpm Outer Dimensions, Width W x Depth D x Height H (mm) 413×355×149 Power Input (V) AC100(50/60Hz) Motor DC brushless motor Tray dimensions (mm) W279 x D330 (aluminum) Type analogfrom S$3,899.00Min. 9 days
- KENIS Small stirrerThe exterior is made of glass fiber reinforced engineering plastic (GF-PBT), which has excellent heat resistance and chemical resistance.Included Accessories 1 stir bar and 1 non-slip mat Power Supply AC100V・0.3Afrom S$299.90Min. 4 days
- Tokyo Glass Kikai (TGK) Stirring blade tip propeller R Made of SUS316For the tip, it can be fixed to the tip of the shaft with the nut attached to the stirring shaft. With a boss, it can be fixed to any position on the stirring shaft with the set screw on the boss. It can also be used in multiple stages.TGK Part No. 386-63-04-02 Product Name Propeller Rfrom S$9.79Min. 7 days
- AS ONE Big Rotor with Inspection Inspection Before ShippingThe rotating roller causes a seesaw motion to mix. The roller spacing can be changed depending on the mixing container. It has a variable rotation speed function and can be used at the desired rotation speed. You can mix containers up to 2L. * An inspection inspection report is attached at the ti... Read MoreAs ONE Part Number 1-5174-01-22 Mass (kg) 13.5 Allowable Load (kg) 2.5 Power Cable (m) 2.5 (3P plug) Roller length (mm) 400 Roller Pitch (mm) 45-100 (variable width 55) Size (mm) 500×205×230 Power Supply AC100V 50/60Hz 1A timer Half an hour Motor Induction motor Included Accessories Inspection inspection documentsfrom S$3,999.00Min. 13 days
- SANSYO Multi mixerReduces noise and vibration. Achieves strong stirring. Up to two 96-hole microplates can be agitated with only the main body (without rack), and the plates can be easily attached and detached with a single touch. We offer a wide variety of optional racks for various containers. The flat plate att... Read Moretimer 0-60 minutes or continuous Outer Dimensions, Width W x Depth D x Height H (mm) 175×203×156 Power Supply AC100V 50/60Hz 0.8A Mass (kg) About 6.8 Rotational Speed (min -1 [rpm]) Max2500 (variable) Method Swivel type (vibration mechanism)from S$1,399.00Min. 6 days
- SANSYO Hot plate stirrerStir at high temperature to increase the solubility of the sample. High torque stirring is possible with the induction motor. With a temperature controller, adjust the heating plate to the required temperature and stir and mix.Outer Dimensions, Width W x Depth D x Height H (mm) 184×202×114 Mass (kg) 3 Heater 350W MAX.270℃(at 25℃) Stirring Capacity (mL) 50~3000 Power Supply AC100V 50/60Hz 4A Rotational Speed (min -1 [rpm]) About 150-1300 Included Accessories One 30 mm stir bar Temperature Control Phase control method Top plate (mm) W175 × D160 Ceramic coating Motor induction motorfrom S$1,199.00Min. 6 days
- scinics Shaking mixerThe tilt angle and speed can be adjusted while shaking, and diagonal shaking by seesaw movement facilitates efficient mixing. A tapper container or culture flask can be placed on the surface of the shaking plate as it is. If you use an optional holder, you can hang a micro tube or a centrifuge tube.timer 0-60 minutes or continuous Shaking table dimensions (mm) 155×155 Shaking speed (min -1 [rpm]) 20-85 (continuously variable) Outer Dimensions, Width W x Depth D x Height H (mm) 205×184×180 Mass (kg) 3.1 (excluding holder) Uniform Load (kg) 800 Power Supply AC100V 50/60Hz 0.04A Motor DC motorfrom S$1,499.00Min. 6 days
- sanpo Stainless Steel Sieve 200Φ x 60ISO3301-1 / JIS Z-8801 Material: Wire mesh / 125mm-150μm ... Stainless steel (SUS304), 125-20μm ... Stainless steel (SUS316), Frame / Stainless steel (SUS304) * There is no taper on the frame / mesh part.Inner Diameter (Φmm) 200 Inner Height (mm) 60 Standard ISO3301-1/ JIS Z-8801 Material (Frame) SUS304 Frame Size Φ200×60mm
- AS ONE Stirring Bar (Value Set)It is a value set born from the voice that 11 is too much and 1 is too few.Material PTFE (fluororesin) Shape Tapered type
- CC Mark (Nikkato) Alumina BallsIt has excellent wear resistance and durability, and is suitable for various crushing and dispersing balls such as natural raw materials, alumina, substrates for electronic components, and sealing materials. General-purpose grade type.Hardness (Hv) 1100 Spiral wear rate (ppm / h) 180 Density (g/cm3) 3.6 Fracture Toughness 3.7MPa√m Hardness HV:9.8GPa(1000kgf/mm2) HRA:87
- sanpo Stainless Steel Sieve 300mm × 100ISO3301-1 / JIS Z-8801 Material: Wire mesh / 125mm-150μm ... Stainless steel (SUS304), 125-20μm ... Stainless steel (SUS316), Frame / Stainless steel (SUS304) * There is no taper on the frame / mesh part.Inner Height (mm) 100 Inner Diameter (Φmm) 300 Standard ISO3301-1/ JIS Z-8801 Material (Frame) SUS304 Frame Size Φ300×100mm
- sanpo Stainless Steel Sieve 75mm × 20ISO3301-1 / JIS Z-8801 Material: Wire mesh / 125mm-150μm ... Stainless steel (SUS304), 125-20μm ... Stainless steel (SUS316), Frame / Stainless steel (SUS304) * There is no taper on the frame / mesh part.Inner Height (mm) 20 Inner Diameter (Φmm) 75 Standard ISO3301-1/ JIS Z-8801 Material (Frame) SUS304 Frame Size Φ75×20mm
- AS ONE Stainless Stirring RodAs ONE Part Number 1-6424-01 Length (mm) 200 Diameter (Φmm) 5 Material Stainless steel (SUS304) Size (mm) Φ5×200
- AS ONE Stirring Rod (Duracon)It has excellent thermal stability, chemical resistance, and oil resistance.Material POM (Duracon (R))
- Tokyo Screen Test Sieve ST Made (Plain Weave) 200Φ × 60DIt is a basic weave with alternating vertical and horizontal lines, and is most commonly used because of its stable mesh for accurate and efficient sieving.Remark Plain weave
- AS ONE Glass Bead* Product colors may vary depending on the production lot and shooting conditions.Specific Gravity 2.5 Material Soda-lime glass
- OHTSUKA BRUSH MFG. Stainless Steel SieveMaterial Frame / SUS430, Net / SUS304 Dimensions, Diameter x Height H (Φmm x mm) 223×74
Filter by categories