Microfiltration (Membrane Filter)
Membrane filters are porous membranes used mainly for high-precision fractionation, separation, extraction, and filtration. It is often used for purification in factories. A wide range of applications, including particle removal, filter sterilization, liquid monitoring, microbial analysis, particle analysis and gas filters. In addition, it is strong and has many specializations in hydrophilic, hydrophobic, and melted materials, and is characterized by its versatility. It is widely used not only for factories but also in scientific research institutions.
Other Related Pages
- ADVANTEC Milk Sediment Disc (Milk Filter Plate)Milk cediment discs made of refined cellulose filaments are used to inspect dairy products for foreign matter.Diameter (Φmm) 33 Mesh Opening About 50μm Specification Quantity: 50 sheets
- ADVANTEC Membrane filter PTFE typeHas excellent chemical resistance. It can be used in the temperature range of 120 to 260 ° C, and can sterilize steam, autoclave, ethylene oxide gas, etc. Since it is water-based, it has the property of allowing oil and organic solvents to pass through and not allow water to pass through.from S$329.90Min. 2 days
- ADVANTEC Membrane filter Cellulose acetate type Pore size 0.45μmDue to its excellent strength, it is easy to handle when setting the filter in the filter, and can withstand autoclave sterilization, ethylene oxide gas sterilization, and dry heat sterilization (180 ° C). Since the material is inert, components of the filtrate such as proteins are hardly adsorbe... Read MorePore diameter (μm) 0.45from S$179.90Min. 2 days
- ADVANTEC Membrane Filter Cellulose Mixed Ester TypeIt can be used for particle removal and filtration sterilization in various testing fields as well as in industrial filtration fields such as pharmaceuticals, beverages, brewing, and chemistry. Autoclave sterilization and ethylene oxide gas sterilization are possible. It is widely used from filtr... Read Morefrom S$68.99Min. 2 days
- ADVANTEC Membrane filter Hydrophilic PTFE type Pore size 0.2μmHydrophilic PTFE type membrane filter. In the case of water-based solvent filtration, the hydrophilic treatment that was conventionally performed with PTFE type membrane filters is not required. Has excellent chemical resistance.Pore diameter (μm) 0.2from S$329.90Min. 2 days
- ADVANTEC Membrane filter Cellulose mixed ester type for microorganism / particle testThe ruled line specifications are convenient for counting microbial colonies and fine particles.Dimension (Φmm) 47 Material Cellulose mixed ester typefrom S$179.90Min. 13 days
- ADVANTEC Membrane filter Cellulose acetate type Pore size 0.2μmDue to its excellent strength, it is easy to handle when setting the filter in the filter, and can withstand autoclave sterilization, ethylene oxide gas sterilization, and dry heat sterilization (180 ° C). Since the material is inert, components of the filtrate such as proteins are hardly adsorbe... Read MorePore diameter (μm) 0.2 Shape Roundfrom S$179.90Min. 2 days
- ADVANTEC Membrane filter Hydrophilic PTFE type Pore diameter 0.5μmHydrophilic PTFE type membrane filter. In the case of water-based solvent filtration, the hydrophilic treatment that was conventionally performed with PTFE type membrane filters is not required. Has excellent chemical resistance.Pore diameter (μm) 0.5from S$329.90Min. 2 days
- ADVANTEC Membrane filter Hydrophilic PTFE type Pore diameter 1μmHydrophilic PTFE type membrane filter. In the case of water-based solvent filtration, the hydrophilic treatment that was conventionally performed with PTFE type membrane filters is not required. Has excellent chemical resistance.Pore diameter (μm) 1from S$259.90Min. 2 days
- ADVANTEC Membrane filter Hydrophilic PTFE type Pore size 0.1μmHydrophilic PTFE type membrane filter. In the case of water-based solvent filtration, the hydrophilic treatment that was conventionally performed with PTFE type membrane filters is not required. Has excellent chemical resistance.Pore diameter (μm) 0.1from S$329.90Min. 5 days
- ADVANTEC Membrane filter Cellulose acetate type Pore diameter 3μmDue to its excellent strength, it is easy to handle when setting the filter in the filter, and can withstand autoclave sterilization, ethylene oxide gas sterilization, and dry heat sterilization (180 ° C). Since the material is inert, components of the filtrate such as proteins are hardly adsorbe... Read MorePore diameter (μm) 3 Shape Roundfrom S$199.90Min. 13 days
- ADVANTEC Membrane filter Polycarbonate type for microorganism / particle testThe ruled line specifications are convenient for counting microbial colonies and fine particles.Material Cellulose mixed typefrom S$129.90Min. 13 days
- ADVANTEC Membrane filter Cellulose acetate type Pore diameter 0.8μmDue to its excellent strength, it is easy to handle when setting the filter in the filter, and can withstand autoclave sterilization, ethylene oxide gas sterilization, and dry heat sterilization (180 ° C). Since the material is inert, components of the filtrate such as proteins are hardly adsorbe... Read MorePore diameter (μm) 0.8 Shape Roundfrom S$199.90Min. 16 days
- ADVANTEC Membrane filter Cellulose acetate type for microorganism / particle testThe ruled line specifications are convenient for counting microbial colonies and fine particles.Dimension (Φmm) 47 Material Cellulose acetate type Surface Plain Color Whitefrom S$329.90Min. 13 days
- SIBATA SCIENTIFIC TECHNOLOGY Hydrophilic PTFE type membrane filterSince it can remove microorganisms and fine particles contained in liquids and gases, it can be used in an extremely wide range of fields such as electronics, pharmaceuticals, food, medicine, and physics and chemistry. A hydrophilic PTFE membrane filter with a special treatment applied to the PTF... Read MoreFilter Porous Diameter (μm) 1.00 Mass (mg) 1.3(cm2) Diameter (Φmm) 25 Thickness (μm) 35 Filtration rate (water) (mL /min . cm2 ) 73 Porosity (%) 83 Type Hydrophilic PTFE Bubble point (MPa) ≧8.3×10-2from S$329.90Min. 13 days
- GVS Membrane filterA supported hydrophilic membrane that retains excellent strength in common filtration or medical assays. Membrane filterMaterial Nylon + hydrophilicfrom S$149.90Min. 7 days
- GVS Membrane filterManufactured from hydrophilic, pure polyether sulfone polymers. Membrane filterMaterial PESfrom S$139.90Min. 7 days
- GVS Microbial testThe single-use sterile filter unit consists of a filter funnel, base, pad, membrane, removable lid and plug. Microbial testMaterial Cellulose mixed ester (MCE) Version 1 Sterilization process: Completedfrom S$339.90Min. 7 days
- GVS Vent filterIdeal as a sterilization vent for filling containers and cowboys. Vent filterDiameter (mm) Membrane: 50 Material PTFE + hydrophobicfrom S$1,299.00Min. 7 days
- GVS CALYX+ capsule filterCALYX Capsule FilterMaterial PES Specification Pore size (μm): 0.2 Version 1 Size (cm 2 (0.8ft2)): 748from S$249.90Min. 7 days
- GVS Microbial testIt contains a swab and medium and is packaged together with a membrane device for quantitative measurements. Microbial testSpecification Swab volume (mL): 2.8from S$489.90Min. 7 days
- GVS Bottle top filterYou can choose any receiving bottle with a diameter of 33 to 45 mm, and there is no need to transfer it. Medium, sterile filtrationMaterial CA (cellulose acetate) Diameter (mm) Membrane: 76 Version 1 Sterilization process: Completed Material (Housing) polystyrenefrom S$489.90Min. 7 days
- GVS Abulo syringe filterHigh quality and excellent cost performance, ideal for multi-sample processing users. Sample pretreatmentDiameter (mm) 13 Material Hydrophilic PTFEfrom S$899.90Min. 7 days
- GVS Bottle top filterYou can choose any receiving bottle with a diameter of 33 to 45 mm, and there is no need to transfer it. Medium, sterile filtration. With pre-filterMaterial CA + fiberglass Diameter (mm) Membrane: 76 Version 1 Sterilization process: Completed Material (Housing) polystyrenefrom S$489.90Min. 7 days
- GVS Microbial testUsed to collect surface contamination. Microbial testCapacity (mL) 4 Specification Neutralization buffer: Not includedfrom S$779.90Min. 7 days
- GVS PM2.5 air monitoring membrane filterThere is no warp and it can be used for automatic filtration equipment. EPA compliant. PM2.5 air monitoringDiameter (mm) 46.2 Material PTFE Specification Pore diameter (μm): 2from S$879.90Min. 7 days
- FLON INDUSTRY PTFE membrane filter 90Φ 10 piecesFluoropore-R Membrane Filter is a fluoropore filter that features outstanding heat resistance (+ 240 ° C), excellent chemical resistance, uniform pore size, and high strength. This filter is pure fluoropore fiber and contains no impurities. It has uniform pore diameter, is flexible, does not tear... Read MoreDimension (Φmm) 90from S$259.90Min. 11 days
- GVS Transfer membraneA positively charged nylon film ideal for repeated reprobing Transfer membraneDimensions, W (mm) x L (m) 300×3 Specification Pore size (μm): 0.45 Material Reprobing charged nylonfrom S$589.90Min. 7 days
- GVS Microbial testThere is no clamp or locking device and it can be operated with one hand. Microbial testDiameter (mm) Membrane: 47 Material PESfrom S$489.90Min. 7 days
- AS ONE PVDF Membrane FilterPVDF has a wide range of scientific properties and excellent mechanical stability. Basic type of PVDF membraneDiameter (Φmm) 90 Surface Plain Material Polyvinylidene chloride Color Whitefrom S$169.90Min. 4 days
- GVS Microbial testIt can be used to detect yeast and mold. Microbial testSpecification Swab volume (mL) 2.8from S$489.90Min. 7 days
- FLON INDUSTRY PTFE Membrane Filter 25Φ 10 PiecesFluoropore-R Membrane Filter is a fluoropore filter that features outstanding heat resistance (+ 240 ° C), excellent chemical resistance, uniform pore size, and high strength. This filter is pure fluoropore fiber and contains no impurities. It has uniform pore diameter, is flexible, does not tear... Read MoreDimension (Φmm) 25from S$68.99Min. 11 days
- AS ONE Membrane Filter PESPES has low protein binding and excellent thermal stability. Basic type of PES membraneDiameter (Φmm) 90 Surface Plain Material Polyethersulfone Color Whitefrom S$169.90Min. 4 days
- SIBATA SCIENTIFIC TECHNOLOGY Cellulose mixed ester type membrane filterSince it can remove microorganisms and fine particles contained in liquids and gases, it can be used in an extremely wide range of fields such as electronics, pharmaceuticals, foods, medicine, and physics and chemistry. It is widely used for particle removal and filtration sterilization from vari... Read MoreType Cellulose mixed esterfrom S$149.90Min. 13 days
- ADVANTEC Coated type membrane filterA porous filter made by coating polyester non-woven fabric with cellulose acetate. [Application] Pre-filter for particle removal filter and membrane filterSurface Plain Color Whitefrom S$64.99Min. 13 days
- GVS Transfer membraneInactive support prevents distortion and contamination due to reprobing Transfer membraneDimensions, W (mm) x L (m) 300×3 Material Neutral nylon Specification Pore diameter (μm): 0.22from S$649.90Min. 7 days
- GVS Microbial testThis simple diagnostic test can also be used in environments and foods where the presence of Listeria monocytogenes is a problem. Microbial testSpecification Sterilization process: Completedfrom S$359.90Min. 7 days