A sampling bag for gas analysis made of vinyl fluoride resin that has excellent resistance to various inorganic gases and organic solvents. Tedlar (R) (vinyl fluoride resin) film has very low gas permeability and adsorptivity, and is suitable as a gas sampling bag. Tedler (R) is a registered trad... Read More
It is almost impermeable to inorganic gases that are easily permeable to other bags and gases such as methane, PVC monomer, and formaldehyde. It has a 5-layer structure and a wall thickness of 120 μm, so it has excellent mechanical strength. Since it has excellent light-shielding properties, ther... Read More
Material Aluminum laminate type 5-layer structure Sleeve type With one side PTFE (fluororesin) cock
By adopting the NPR method (balanced structure), stable adjustment pressure is maintained despite the one-stage decompression structure. Ideal for gas supply with a gas purity of 99.99%. NPR-LB and NPR-MB are not balanced, but they maintain a stable adjustment pressure because the primary pressur... Read More
A bag made of vinyl alcohol-based polymer film, which has excellent solvent resistance, heat resistance, and adsorption resistance, and has extremely little impurity elution from the material. It also has excellent transparency resistance. This property makes it applicable to a wide range of samp... Read More
Heat Resistance Temperature (℃) 120 Film thickness (μm) 53 Specification Low blank Material Made of vinyl alcohol polymer film
A connector with a built-in porous filter that filters the liquid flowing in the direction of the arrow.
Osurua: By connecting the female lure fitting part number VRF / VPRF, you can connect a soft / semi-rigid tube with an inner diameter of 1.5 to 6.5 mm. Operating temperature: 0 to + 80 ° C Wit... Read More
Made of vinyl fluoride (PVF) film, it has excellent resistance to organic solvents. In addition, it has excellent mechanical strength and can be used in a wide temperature range from -70 ° C to 100 ° C. In general, it is suitable for a wide range of samples, from inorganic gases to organic solven... Read More
Material Made of vinyl fluoride (PVF) film Film thickness (μm) 50 Heat Resistance Temperature (℃) 100
It is almost impermeable to inorganic gases that are easily permeable to other bags and gases such as methane, PVC monomer, and formaldehyde. It has a 5-layer structure and a wall thickness of 120 μm, so it has excellent mechanical strength. Since it has excellent light-shielding properties, ther... Read More
Material Aluminum laminate type 5-layer structure Sleeve type One side Φ6mm PTFE (Fluororesin) made
The mini pump MP-Σ (Sigma) series is a compact, lightweight, portable high-performance air suction pump with a built-in integrated flow rate measurement function. Three basic types are available for each flow rate range: 0.5L / min, 3L / min, and 5L / min. Since the suction flow rate is stable, i... Read More
Specification (Built-in flow meter) Mass flow sensor Operating Temperature / Humidity Range 0 ~ 40 ℃ ・ 10 ~ 90% RH (no condensation) Dimensions, Width W x Depth D x Height H (mm) 145 x 67 x 95 (excluding protrusions) Pump Double diaphragm method Display Part Liquid crystal display (with backlight) Flow rate accuracy Within ± 5% of the set flow rate value
Many types of sampling are possible simply by exchanging the sampling cassette. Since it uses a unit consisting of a valve and a silicon tube, it prevents odor from adhering to the pump and generating odor from the pump (AC / DCII type).
It is an ultra-compact air suction pump, which is lightweight, portable, and battery-powered, yet has high suction pressure and the ability to change a stable suction flow rate over a wide range. It can be used continuously for 8 hours or more with AA batteries.
You can easily cut the glass tube. Shards of glass are stored in the holder and are safe.
For both ends sealed glass collection tube, for cutting both ends of glass tube
AS ONE Sampling Bag (with 2 Mouth Cock)Specification With two-mouth cock
