All Category

Disposable Syringes

A disposable syringe is a disposable syringe. Disposable means disposable, which helps prevent infection and reduce costs. Plastic ones are common. It is used for suction and injection of chemical liquids and gases during experiments. There is no needle, and it is possible to connect a nozzle to the tip for fine dispensing or attach a cap to prevent leakage of the drug solution inside. If it's made entirely of plastic, you don't have to worry about rubber leaching out like conventional products.
View : Grid List
Filter

Items 1 - 40 of 566

Set Ascending Direction
  1. Disposable Needleless Syringe
    MonotaRO Disposable Needleless Syringe
    An easy-to-use syringe. It can be used comfortably even if the amount of residual liquid is small. EOG sterilized, individually wrapped and hygienic. For injecting grease, adhesive, oil, etc. into narrow spaces. For syringes when attached to syringe filters during research and experiments. Connec... Read More
    Opening Diameter D (Φmm)  About 3.96  Tip Outer Diameter (Φmm)  About 4.2  Sterilization Method  EOG  Cylinder Tip  Lure slip  Material  PP (polypropylene)  Sterilizing  Sterilized 
    Rating:
    84%
    from S$15.99
    Min. 2 days
  2. Hard Glass Injection Tube (Class1)
    Tsuji Seisakusho Hard Glass Injection Tube (Class1)
    Tip Outer Diameter (Φmm)  4.2~4.4  Pharmaceuticals and Medical Devices Act  General medical equipment  Standard  General medical equipment class I  Material  Hard glass  Cylinder Tip  Lure  Sterilizing  None  Type  Side type  Scale  Yes 
    Rating:
    95%
    from S$35.99
    Min. 2 days
  3. Graduated Clear Syringe PSY Series
    Musashi Engineering Graduated Clear Syringe PSY Series
    A graduated syringe that shows the remaining amount of liquid at a glance.
    from S$24.99
    Min. 2 days
  4. Inter Injection Syringe (Glass Tip)
    VAN (Tsubasa Industry) Inter Injection Syringe (Glass Tip)
    * This product cannot be used for any purpose other than research or experimentation.
    Pharmaceuticals and Medical Devices Act  General medical equipment  Tip  Glass lure destination  Material  Hard glass 
    from S$8.29
    Min. 2 days
  5. Color plastic syringe
    KENIS Color plastic syringe
    ● Plastic syringe for collar piston. ● The tip of the syringe is a side-mouth type that extends from below the center.
    Tip Outer Diameter (Φmm)  Sterilizing  Already  Sterilization Method  Electron beam sterilization  Cylinder Tip  Lure slip  Material  Polypropylene  Specification  Without needle 
    Rating:
    95%
    from S$1.19
    Min. 2 days
  6. Luer Tip All Plastic Syringe
    KENIS Luer Tip All Plastic Syringe
    Since it is an all-plastic integrally molded plunger, there is no risk of the tip and plunger coming off. Since it is a slip-on method that can be easily attached and detached, it is convenient for applications where needles and adapters are frequently replaced. * This product is not a medical de... Read More
    Tip Outer Diameter (Φmm)  Specification  Bulk packaging  Material (Piston)  Polyethylene (PE)  Material (Outer Pipe)  Polypropylene (PP) 
    Rating:
    94%
    from S$5.39
    Min. 2 days
  7. Plastic Syringe
    BOLL Plastic Syringe
    Since it is an all-plastic syringe that does not use any rubber, it can be used without worrying about the elution derived from rubber. *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or experimentation. *When ... Read More
    Tip Outer Diameter (Φmm)  4.0  Sterilizing  None  Material (Piston)  PE  Material (Outer Pipe)  PP  Type  Side type 
    Rating:
    76%
    from S$2.29
    Min. 2 days
  8. Disposable Injection Tube
    NARIKA Disposable Injection Tube
    Material  plastic 
    Rating:
    92%
    from S$0.65
    Min. 2 days
  9. White Hard Injection Syringe (Luer)
    VAN (Tsubasa Industry) White Hard Injection Syringe (Luer)
    *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or experimentation. *When purchasing, you may be asked to confirm the purpose of use and purchase. In addition, we may refuse to purchase.
    Tip Outer Diameter (Φmm)  4.2~4.4  Material  Hard glass  Cylinder Tip  Lure  Sterilizing  None  Scale  Yes 
    Rating:
    84%
    from S$19.99
    Min. 2 days
  10. Syringe for Dispenser
    Musashi Engineering Syringe for Dispenser
    from S$56.99
    Min. 2 days
  11. All Plastic Disposable Syringe (Lock)
    HENKE All Plastic Disposable Syringe (Lock)
    No sealing rubber or silicone oil that causes contamination (contamination) is used. Each syringe is blister-packed to protect the syringe from contaminants. *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or e... Read More
    Material  (outer cylinder) PP, (Piston) PE  Sterilization Method  EOG sterilization  Cylinder Tip  Lure lock  Standard  Medical device class I  Type  Medium  Sterilizing  Sterilized  Scale  Yes 
    from S$58.99
    Min. 2 days
  12. Syringe
    Hikari Syringe
    Adhesive syringe. Adhesive work for acrylic, vinyl chloride, pet ace, etc. Accurate adhesion work can be performed.
    Specification  With needle 
    Rating:
    70%
    from S$3.29
    Min. 2 days
  13. Luer lock all plastic syringe
    HENKE Luer lock all plastic syringe
    As it is an all-plastic integrated plunger, there is no danger of the tip and plunger coming off. The luer hub type needle adapter is fixed, and it has a safe notch that does not come off during use. * This product is not a medical device.
    Specification  Bulk packaging 
    from S$48.99
    Min. 2 days
  14. Industrial Syringe
    VAN (Tsubasa Industry) Industrial Syringe
    It is a serial number type that lifts the cylinder with a piston, so it has excellent airtightness. A center tip that is easy to handle and a lock tip type that prevents the connector and needle base from falling off. Easy-to-read blue scale. ● This product is not for medical use. It cannot be us... Read More
    Scale  Blue  Material  Borosilicate glass 
    Rating:
    100%
    from S$19.99
    Min. 2 days
  15. VAN White Hard Injection Syringe Lock Tip (without Needle)
    VAN (Tsubasa Industry) VAN White Hard Injection Syringe Lock Tip (without Needle)
    *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or experimentation. *When purchasing, you may be asked to confirm the purpose of use and purchase. In addition, we may refuse to purchase.
    Tip Outer Diameter (Φmm)  Sterilizing  None  Scale  Yes 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  16. White Hard Injection Syringe (Enemator)
    AS ONE White Hard Injection Syringe (Enemator)
    *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or experimentation. *When purchasing, you may be asked to confirm the purpose of use and purchase. In addition, we may refuse to purchase.
    Dimension Tolerance (mm)  (Tip outer diameter) ± 1.0  Cylinder Tip  Enema point  Material  Hard glass  Type  Medium  Sterilizing  None  Scale  Yes 
    Rating:
    90%
    from S$68.99
    Min. 2 days
  17. Disposable Syringe Luer Lock
    AS ONE Disposable Syringe Luer Lock
    It is made of all plastic without using any rubber. * This product cannot be used for any purpose other than research or experimentation.
    Material  Syringe: PP, Plunger seal: PE 
    from S$77.99
    Min. 2 days
  18. Syringe set
    YAYOI CHEMICAL INDUSTRY Syringe set
    Please use it to inject the adhesive when the wallpaper joint part is peeled off again. * Since the straight nozzle is a flat tip type, it cannot be pierced directly.
    Capacity (mL)  32  Tip Outer Diameter (Φmm)  About 1.25  Overall Length (mm)  About 131  Body Diameter (Φmm)  About 23  Cylinder Tip  Lure lock  Type  Medium  Sterilizing  None  Included Accessories  With 2 straight nozzles 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  19. Clear syringe with scale
    Musashi Engineering Clear syringe with scale
    Excellent flow characteristics due to its unique shape. Eliminates the "breathing phenomenon" of the plunger due to the straight syringe inner diameter design. It is silicon-free. Unique design that suppresses expansion and contraction. High withstand voltage design with significantly i... Read More
    Regular Pressure (MPa)  Max0.5 (normal temperature)  Sterilizing  None  Material  Polypropylene (PP) 
    Rating:
    100%
    from S$89.99
    Min. 2 days
  20. White Hard Injection Tube for Small Amount (without Needle)
    VAN (Tsubasa Industry) White Hard Injection Tube for Small Amount (without Needle)
    For a small amount. *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or experimentation. *When purchasing, you may be asked to confirm the purpose of use and purchase. In addition, we may refuse to purchase.
    Tip Outer Diameter (Φmm)  4.2~4.4  Minimum Scale (mL)  4.2~4.4  Pharmaceuticals and Medical Devices Act  General medical equipment  Cylinder Tip  Glass lure destination  Material  Hard glass  Type  Medium  Sterilizing  None  Scale  Yes 
    Rating:
    90%
    from S$45.99
    Min. 5 days
  21. Gastight Syringe
    S.G.E Gastight Syringe
    from S$149.90
    Min. 2 days
  22. Disposable syringe
    NARIKA Disposable syringe
    from S$1.19
    Min. 2 days
  23. Gas tight syringe
    Hamilton Gas tight syringe
    Capacity (mL) 
    from S$259.90
    Min. 2 days
  24. Luer Valve
    AS ONE Luer Valve
    Can be joined to standard lure syringes and luer connectors. You can use a lock needle. * This product cannot be used for any purpose other than research or experimentation.
    As ONE Part Number  1-7399-01 
    from S$45.99
    Min. 2 days
  25. All plastic disposable syringe
    KOKUGO All plastic disposable syringe
    from S$58.99
    Min. 2 days
  26. Gas tight syringe
    Hamilton Gas tight syringe
    Capacity (mL) 
    from S$299.90
    Min. 2 days
  27. Inter Injection Syringe
    VAN (Tsubasa Industry) Inter Injection Syringe
    from S$17.99
    Min. 2 days
  28. Dispenser Syringe PSY Series
    Musashi Engineering Dispenser Syringe PSY Series
    The outstanding flow characteristics due to the unique shape and the straight design inside the syringe eliminate the "breathing phenomenon" of the plunger.
    Rating:
    100%
    from S$35.99
    Min. 2 days
  29. Gas tight syringe
    Hamilton Gas tight syringe
    Capacity (μL)  100 
    from S$229.90
    Min. 13 days
  30. Syringe with 2-way cock
    NARIKA Syringe with 2-way cock
    from S$11.99
    Min. 2 days
  31. Clear syringe F type with scale
    Musashi Engineering Clear syringe F type with scale
    Capacity (mL)  50  Trusco Part No.  771-4386  Mass (g)  829.9 
    from S$229.90
    Min. 2 days
  32. Dispenser Syringe PSY Series
    Musashi Engineering Dispenser Syringe PSY Series
    While completely blocking UV light, the remaining amount of liquid is clear at a glance due to the improved transmittance in the visible light region.
    from S$77.99
    Min. 4 days
  33. Gastight Syringe
    S.G.E Gastight Syringe
    from S$97.99
    Min. 13 days
  34. Graduated UV Block Syringe PSY Series
    Musashi Engineering Graduated UV Block Syringe PSY Series
    A graduated syringe compatible with UV curable resin that shows the remaining amount of liquid at a glance.
    from S$89.99
    Min. 2 days
  35. UV block syringe with scale
    Musashi Engineering UV block syringe with scale
    It completely shuts out UV rays. By improving the transparency in the visible light region, the remaining amount of liquid agent can be seen at a glance. A polypropylene container exclusively for UV curable liquid materials.
    Material  Polypropylene (PP) 
    from S$199.90
    Min. 2 days
  36. All plastic disposable syringe
    KOKUGO All plastic disposable syringe
    from S$55.99
    Min. 4 days
  37. Gas tight syringe
    Hamilton Gas tight syringe
    Capacity (μL)  250 
    from S$229.90
    Min. 4 days
  38. Syringe Control
    AS ONE Syringe Control
    *Monotarou does not handle injection needles. *This product is not for medical use. It cannot be used for purposes other than research or experimentation. *When purchasing, you may be asked to confirm the purpose of use and purchase. In addition, we may refuse to purchase.
    Pharmaceuticals and Medical Devices Act  General medical equipment  Cylinder Tip  Lock destination 
    from S$149.90
    Min. 13 days
  39. Disposable Syringe
    AS ONE Disposable Syringe
    Capacity (mL)  0.5  As ONE Part Number  2-4262-01 
    from S$64.99
    Min. 4 days
  40. 700 series + manual hand gun
    DESCO 700 series + manual hand gun
    A manual gun type dispenser used when applying medium to high viscosity materials.
    Mass (g)  110 
    from S$199.90
    Min. 7 days
View : Grid List
Filter

Items 1 - 40 of 566

Set Ascending Direction