All Category

Caps for Syringes

View : Grid List
Filter

17 Item(s)

Set Ascending Direction
  1. Needle cap (normal type)
    Musashi Engineering Needle cap (normal type)
    A cap that seals the tip of the syringe. For storage and transportation with the liquid agent packed. For both general and UV materials
    Rating:
    90%
    from S$24.99
    Min. 2 days
  2. Disposable syringe cap
    OSAKA CHEMICAL Disposable syringe cap
    A cap that prevents the sample in the syringe from leaking. It is shared by lure tip and lure lock. For temporary storage of adhesives and paints. * This product is not a medical product.
    TGK Part No.  149-14-90-32  Trusco Part No.  390-7708  Top Diameter x Height H (mm)  8×17  Suitable Model  All plastic syringe made by HENKE  Standard  Medical device class I  Material  Polypropylene 
    from S$45.99
    Min. 2 days
  3. 10 caps for syringes
    HENKE 10 caps for syringes
    A cap that prevents the sample in the syringe from leaking. Temporary storage of adhesives and paints * This product is not a medical device.
    Height (mm)  17  Mass (g)  Trusco Part No.  365-9992  Outer Diameter (mm)  Compatible syringe  HENKE all plastic syringe  Material  Polypropylene (PP) 
    from S$11.99
    Min. 2 days
  4. Syringe Tip Cap Knurled Type 50 Pcs
    Musashi Engineering Syringe Tip Cap Knurled Type 50 Pcs
    A cap that seals the bottom of the syringe.
    As ONE Part Number  61-3589-87  Material  Made of polyethylene 
    from S$32.99
    Min. 2 days
  5. Head cap
    Musashi Engineering Head cap
    A cap that seals the top of the syringe. For storage and transportation with the liquid agent packed. For both general and UV materials
    Material  Polyethylene (PE) 
    from S$35.99
    Min. 2 days
  6. Syringe Head Cap HC Series
    Musashi Engineering Syringe Head Cap HC Series
    A cap that seals the top of the syringe. (For 20-70 ml)
    As ONE Part Number  61-3589-80  Suitable Capacity (mL)  For 20-70  Material  Made of polyethylene 
    from S$25.99
    Min. 2 days
  7. Syringe Head Cap HC Series
    Musashi Engineering Syringe Head Cap HC Series
    A cap that seals the top of the syringe. (For 10 ml)
    As ONE Part Number  61-3589-79  Suitable Capacity (mL)  For 10  Material  Made of polyethylene 
    from S$22.99
    Min. 2 days
  8. Syringe Head Cap For UV Material HC Series
    Musashi Engineering Syringe Head Cap For UV Material HC Series
    A cap that seals the top of the syringe. (UV compatible, for 5 ml)
    As ONE Part Number  61-3589-83  Suitable Capacity (mL)  For 5  Material  Made of polyethylene 
    from S$29.99
    Min. 2 days
  9. Syringe Head Cap HC Series
    Musashi Engineering Syringe Head Cap HC Series
    A cap that seals the top of the syringe. (For 5 ml)
    As ONE Part Number  61-3589-78  Suitable Capacity (mL)  For 5  Material  Made of polyethylene 
    from S$19.99
    Min. 2 days
  10. Tip cap
    Iwashita Engineering Tip cap
    The double lock seal prevents liquid leakage, dirt on the barrel tip, and damage to the needle mounting part, which are likely to occur after filling the material.
    2018 Trusco page  3 1122  Mass (g)  37  Trusco Part No.  836-3239  Material  Polyethylene 
    from S$22.99
    Min. 2 days
  11. Syringe cap
    KENIS Syringe cap
    A dispensing nozzle (needle with a blunt tip) and a syringe cap that can be attached to a lure (tip) type syringe.
    Specification  For lure / lock 
    from S$55.99
    Min. 3 days
  12. Nozzle Dry Prevention Cap
    Musashi Engineering Nozzle Dry Prevention Cap
    A cap that can be used with a syringe stand to prevent nozzle drying.
    As ONE Part Number  61-3591-34 
    from S$48.99
    Min. 13 days
  13. Syringe Head Cap For UV Material HC Series
    Musashi Engineering Syringe Head Cap For UV Material HC Series
    A cap that seals the top of the syringe. (UV compatible, for 3 ml)
    As ONE Part Number  61-3589-82  Suitable Capacity (mL)  For 3  Material  Made of polyethylene 
    from S$27.99
    Min. 10 days
  14. Syringe Head Cap HC Series
    Musashi Engineering Syringe Head Cap HC Series
    A cap that seals the top of the syringe. (For 100 ml)
    As ONE Part Number  61-3589-81  Suitable Capacity (mL)  For 100  Material  Made of polyethylene 
    from S$63.99
    Min. 15 days
  15. Syringe Head Cap HC Series
    Musashi Engineering Syringe Head Cap HC Series
    A cap that seals the top of the syringe. (For 3ml)
    As ONE Part Number  61-3589-77  Suitable Capacity (mL)  For 3  Material  Made of polyethylene 
    from S$13.99
    Min. 10 days
  16. Syringe Head Cap
    Musashi Engineering Syringe Head Cap
    A cap that seals the top of the syringe. (For 1 ml)
    As ONE Part Number  61-3589-76  Material  Made of polyethylene 
    from S$38.99
    Min. 16 days
  17. Tip cap
    Henkel Tip cap
    Replacement Syringe 10ml Replacement Tip Cap Replacement Syringe 30ml
    Product Name  Tip cap  2018 Trusco page  3 1118  Mass (g)  486  Specification  Parts for digital syringe applicator  Trusco Part No.  836-6461 
    from S$29.99
    Min. 32 days
View : Grid List
Filter

17 Item(s)

Set Ascending Direction