Transfer Pipettes
A dropper is a tool used to suck up liquid and transfer it to a container. The body is counted as a "book", but the drop of liquid sucked up with a dropper is counted as a "drop" or "dot". It is common to have a thin mouth, a body to store liquid, and a bag-shaped one to suck up liquid. There are one type, which is made entirely of soft plastic, and another type, which is made of glass, the mouth and the body, and the bag is made of rubber. There are many types such as graduated and sterilized, so it is important to use them properly depending on the application.
Other Related Pages
NIKKO (Nikko Hansen) Chemical DropperBellows type that allows smooth injection and pouring, and the material is flexible LDPE. The temperature range can be used from -30 ° C to 60 ° C. It is structurally stable when frozen, but cannot be autoclaved.Material LDPE (Low Density Polyethylene) Scale Yes- AS ONE Disposable Plastic DropperMaterial LDPE (Low Density Polyethylene) Sterilizing None
-
- MonotaRO Disposable Sterile Transfer Pipettes, PEEOG sterilized, disposable dropper that is very convenient for testing small samples. Sold in units of 100, easy to use. *Not individually packaged. * Cannot be used for purposes other than research or experimentation.Material PE Sterilizing Sterilized
- BOLL DropperFor extraction and mixing of minute amounts. For mixing fertilizers and 2-cycle engine oils. With scale. * Kerosene, gasoline, and powerful drugs cannot be used. * Do not put highly volatile substances.RoHS directive (corresponding to 10 substances) Correspondence Sterilizing None Material Polyethylene (PE)
- AS ONE Poly Dropper (Sterilized)Specification EOG sterilized Material LDPE (Low Density Polyethylene)
- SANPLATEC Bellows PipetteA pipette that does not require a rubber dropperPipette Type Bellows pipette Material PE (polyethylene)
- BeHAUS Police dropperFor liquid dripScale (mL) 0.1 Mass (g) 1 Maximum Outer Diameter (mm) 13 Sterilizing None Material Polyethylene
- SANPLATEC Econo dropper not sterilizedIt is a disposable dropper with cost merit. The material is polyethylene.Minimum Reading (mL) 0.5 Overall Length (mm) 155 Material Polyethylene Sterilizing Unsterilized
- MIYAKE KAGAKU DropperThe angle changes at the center of the nozzle.As ONE Part Number 1-5690-01 Underneck Length (mm) 165 Overall Length (mm) 245 Capacity (mL) 25 Suction volume (mL) About 25-30 Material PE (polyethylene) Specification Suction volume / approx. 25-30ml
- Mizuho Kasei DropperA simple dropper made of resin. With scale * Liquids that are not suitable for polyethylene cannot be used.Capacity (mL) 2 Scale Yes Heat Resistance Temperature (℃) 60 Material Polyethylene (PE) Suction volume (mL) 2
-
- MINESHIMA Syringe 5pcsUsed for blending paints. It can be used for various purposes such as adhesives.Material PE (polyethylene) Capacity (mL) 3
- ARAM Poly dropper 2mLAn easy-to-use and inexpensive polyethylene disposable dropper.Overall Length (mm) 85 Capacity (mL) 2
-
- MARUEMU DISPETJust push the ball to suck up a certain amount.Sterilizing None Material PE (polyethylene) Scale Yesfrom S$25.99Min. 2 days
- Tokyo Glass Kikai (TGK) Poly PipetteRemark With scale Minimum Reading (mL) 0.1 Material PE Overall Length (mm) 90
- AS ONE Poly DropperOne bag contains 250 pieces x 4 bags.As ONE Part Number 1-4656-02 Inner Dia. x Outer Dia. (Φmm) 1.7 x 3.1 (tip) Overall Length (mm) 135 Capacity (mL) 2 Suction volume (mL) 2 Material LDPE (Low Density Polyethylene) Sterilizing Nonefrom S$149.90Min. 2 days
- KENIS Ink dropper (mini dropper)● A dropper suitable for handling small volumes of liquid.Capacity (mL) 2 Material Polyethylene
- AS ONE Poly Dropper For Blood SamplingCapacity (mL) 1 As ONE Part Number 1-4653-01 Inner Dia. x Outer Dia. (Φmm) 1.5 x 3.0 (tip) Overall Length (mm) 150 Specification EOG sterilized Material LDPE (Low Density Polyethylene)
- AS ONE Sterilization DropperCapacity (mL) 1 Inner Dia. x Outer Dia. (Φmm) 1.25 ± 0.2 × 2.5 (tip) Overall Length (mm) 160 As ONE Part Number 2-7586-01 Material PE (polyethylene) Sterilizing Sterilized Sterilization Method gamma raysfrom S$22.99Min. 2 days
- Tokyo Glass Kikai (TGK) Poly dropper with scaleMaterial PE (polyethylene) Specification Quantity: 100 pieces Overall Length (mm) 135 TGK Part No. 405-22-25-05 Capacity (mL) 2 Scale Yes Sterilizing None Minimum Reading (mL) 0.1 Suction volume (mL) 2
- Debika DropperA great deal of 2 pieces! ・ Comes with eye-catching eyes. For calligraphy, scientific experiments, and office workDimensions, Diameter x Height H (Φmm x mm) Clear: 13x96, Blue: 16x82 RoHS directive (corresponding to 10 substances) Correspondence Material PE
- BeHAUS Belopet dropperA pipette that does not require a rubber dropper. For liquid dripRoHS directive (corresponding to 10 substances) Correspondence Material Polyethylene
- Shin'Ei Twin dropper bellows* Jumbala type color cannot be specified.Outer Dia. x Hole Dia. (Φmm) 3.5×1.3 Scale Yes Overall Length (mm) 90 Capacity (mL) 3 Material PP
- KENIS Non-graduated dropper● A graduated dropper with red milk soybeans.Material Borosilicate glass Included Accessories Red milk beansfrom S$17.99Min. 2 days
- Kanda rubber chemical Bellows PipetteIt can be sucked with a bellows and pushed out.Material Soft PE
- NIKKO (Nikko Hansen) Poly all-purpose syringeMade of highly flexible LDPE, it is a dropper with a molding scale (reference).Operating Temperature Range (℃) "-30～60from S$35.99Min. 2 days
-
-
- Kanda rubber chemical Police dropperCapacity (mL) 2 Material Polyethylene
-
- SANSYO γ-ray sterilized PE dropperHighly versatile products are sterilized and packed with gamma rays. It is individually wrapped and can be used immediately. It is a pack of 10 that is easy to purchase. Test reports for non-sterilization tests and dose distribution measurements can be issued.Overall Length (mm) 138 Capacity (mL) 2from S$17.99Min. 2 days
-
- NIKKO (Nikko Hansen) Disposable PipetteA pipette made of highly flexible LDPE with a molding scale (reference).Operating Temperature Range (℃) -30～60from S$27.99Min. 2 days
-
- SANPLATEC Dropper (square type)An orthodox polyethylene dropper. The scale accuracy of the product has been improved.Scale (mL) 0.1 Capacity (mL) 2 Overall Length (mm) 96 Material Polyethylenefrom S$119.90Min. 2 days
-
- AS ONE PipetteThere is almost no elution of resin components. EOG and radiation sterilization are possible. Can be cryopreserved. The tip of the pipette can be heat-sealed. The type with scale is about 0.5 / 1.0 mL per scale. * We do not deliver to private homes (detached houses / apartments).Scale None Material Polyethylene
- Leona Police dropperPlease choose from various shapes and capacities. It is convenient because it is packaged every 20 pieces. EOG sterilized.Material LDPEfrom S$29.99Min. 2 days
