All Category

Pressure Washer Lances

View : Grid List
Filter

27 Item(s)

Set Ascending Direction
  1. Turbo lance (parts for high pressure washer MRO-1400)
    MonotaRO Turbo lance (parts for high pressure washer MRO-1400)
    * Do not use for anything other than its intended purpose.
    Specification  Parts for high pressure washer MRO-1400  Type  Turbo lance 
    Rating:
    70%
    from S$15.99
    Min. 2 days
  2. High pressure washer parts Diffusion variable lance
    IRIS OHYAMA High pressure washer parts Diffusion variable lance
    This is a special part for our tank type high pressure washer. Since it can be switched between direct injection and diffused water flow, it can be adjusted according to the dirt.
    Trusco Part No.  792-0377  Material  Nylon 
    Rating:
    90%
    from S$39.99
    Min. 2 days
  3. Stainless steel lance for high pressure washer trigger gun
    Chubu High-Pressure Hose Stainless steel lance for high pressure washer trigger gun
    Both ends 1/4 (2 minutes) R male screw * The surface is not polished (performance does not change) * Be sure to use sealing tape when installing the gun.
    Withstand Pressure (MPa)  28  Material  SUS304 
    from S$26.99
    Min. 2 days
  4. High pressure washer turbo lance A
    IRIS OHYAMA High pressure washer turbo lance A
    Spiral water flow that is strong against pinpoint. A strong stream of water spirals out to wash away dirt.
    Mass (g)  220  Main Unit Dimensions, Width W x Depth D x Height H (mm)  45×45×450  Trusco Part No.  498-6083  Material  Nylon 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  5. Variable Lance 8. For 5/60
    ASADA Variable Lance 8. For 5/60
    It is possible to switch steplessly from direct injection to fan shape. It is used by attaching it to the trigger gun. It is possible to switch steplessly from direct injection to fan shape. High pressure / low pressure switching is possible.
    Suitable Model  8.5/60、8.5/60P、10/100G  Trusco Part No.  829-1327  2018 Trusco page  9 0094  Connection size  M22  Material  Plastic, steel  Product Name  Variable lance 
    from S$159.90
    Min. 4 days
  6. Lance 150/440
    ASADA Lance 150/440
    Room air conditioner Ideal for cleaning the fins of indoor units.
    Length (mm)  160 
    from S$43.99
    Min. 5 days
  7. High pressure washer parts Wide angle lance
    IRIS OHYAMA High pressure washer parts Wide angle lance
    This is a special part for our high pressure washer. Efficiently cleans a wide area with a fan-shaped stream of water.
    Trusco Part No.  792-0351  Material  Glass-filled nylon, stainless steel 
    from S$32.99
    Min. 6 days
  8. Lance / 440
    ASADA Lance / 440
    Ideal for cleaning fins of air conditioners.
    Length (mm)  360 
    from S$52.99
    Min. 4 days
  9. Short double lance body
    PA Short double lance body
    A short double lance with a total length of 22 cm. Nozzle side 1/4 female screw, in side 1/4 female screw. * A separate nozzle is required.
    Heat Resistance Temperature (℃)  160  Withstand Pressure (MPa)  28  Discharge Rate (L/min)  40  Nozzle  None 
    from S$189.90
    Min. 5 days
  10. Lance set C
    Wagner Japan Lance set C
    Accessory lance for high pressure washer To use the high pressure washer WZ series more comfortably * Nozzle is sold separately
    Suitable Model  WZ series 
    from S$129.90
    Min. 6 days
  11. Underbody lance
    ESCO Underbody lance
    Overall Length (m)  About 1  Esco Part No.  EA115KA-2 
    from S$139.90
    Min. 4 days
  12. Underbody spray lance for AJP-1600
    Kyocera (formerly RYOBI power tool) Underbody spray lance for AJP-1600
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    Trusco Part No.  379-8551 
    from S$69.99
    Min. 4 days
  13. Extension lance
    WORX Extension lance
    from S$23.99
    Min. 5 days
  14. Turbo Nozzle Lance for AJP-1600
    Kyocera (formerly RYOBI power tool) Turbo Nozzle Lance for AJP-1600
    Turbo nozzle lance for high pressure washer. * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    Mass (g)  210  Trusco Part No.  379-8461  Suitable Model  AJP-1600、AJP-1620  Suitable for  AJP-1600、AJP-1620  Type  Turbo nozzle lance 
    from S$78.99
    Min. 2 days
  15. 500mm extension lance
    ESCO 500mm extension lance
    The nozzle can be extended by 40 cm for cleaning where high pressure water does not reach. For high pressure washer
    Maximum Pressure (MPa)  16  Highest Temperature (℃)  40  Overall Length (mm)  500  Esco Part No.  EA115KA-23  Dimensions (cm)  [Nozzle extension] 40 
    from S$44.99
    Min. 6 days
  16. Variable Nozzle Lance for AJP-1600
    Kyocera (formerly RYOBI power tool) Variable Nozzle Lance for AJP-1600
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    Suitable Model  AJP-1600  Product Name  Variable nozzle lance for AJP-1600 
    from S$46.99
    Min. 2 days
  17. Variable Nozzle Lance
    Kyocera (formerly RYOBI power tool) Variable Nozzle Lance
    * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    Trusco Part No.  379-8429  Type  Variable nozzle lance 
    from S$46.99
    Min. 2 days
  18. Flexible Lance
    Kyocera (formerly RYOBI power tool) Flexible Lance
    The angle of the nozzle can be freely adjusted (±90 degrees), so it can be used for cleaning areas that cannot be reached with a straight lance. Compatible with RYOBI electric high pressure washers * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distributi... Read More
    Specification  With variable nozzle 
    from S$77.99
    Min. 2 days
  19. High pressure washer parts  Wide-angle transformer lance
    IRIS OHYAMA High pressure washer parts Wide-angle transformer lance
    This is a special part for our high pressure washer. A wide range can be efficiently washed with a fan-shaped water stream. Comes with a transformer function that can be used according to the purpose.
    Trusco Part No.  792-0369  Material  Nylon 
    from S$54.99
    Min. 6 days
  20. Kitchen Pika Kun Dedicated Gap Cleaning Lance
    FLUTECH Kitchen Pika Kun Dedicated Gap Cleaning Lance
    Easily cleans troublesome gaps and dirt on the bottom of kitchen equipment
    Mass (kg)  0.7  TKG Part No. (2017)  6-1235-0701  TKG Part No.  7-1293-0801  Overall Length (cm)  About 110 
    from S$189.90
    Min. 3 days
  21. Variable Nozzle Lance for AJP-1420 Series / 1700 Series
    Kyocera (formerly RYOBI power tool) Variable Nozzle Lance for AJP-1420 Series / 1700 Series
    The strength of the water discharge pressure can be adjusted steplessly. Variable nozzle lance for high pressure washers. * The logo will be switched to [KYOCERA] in sequence depending on the manufacturer's distribution inventory. Thank you for your understanding when purchasing.
    Mass (g)  210  Trusco Part No.  442-9729 
    from S$46.99
    Min. 2 days
  22. Cleaning gun with straight lance (SUS304)
    Chubu High-Pressure Hose Cleaning gun with straight lance (SUS304)
    Straight lance for commercial high pressure washers Gun lance uses stainless steel (SUS304). No rust surface processing (gray color) The nozzle is fitted with a standard 1549 size. If you want another hole diameter size, please purchase it separately.
    Heat Resistance Temperature (℃)  150  Nozzle  1549(1/4)  Discharge Rate (L/min)  25  Withstand Pressure (MPa)  28 
    Discontinued
  23. For variable lance 8/60
    ASADA For variable lance 8/60
    Discontinued
  24. High pressure washer Wide angle lance A
    IRIS OHYAMA High pressure washer Wide angle lance A
    Efficiently cleans a wide area with a fan-shaped stream of water.
    Material  Nylon  Trusco Part No.  498-6091  Main Unit Dimensions, Width W x Depth D x Height H (mm)  40×40×570  Mass (g)  300 
    Discontinued
  25. For variable lance 8.5 / 60 / 8.5 / 60P / 10 / 100G
    ASADA For variable lance 8.5 / 60 / 8.5 / 60P / 10 / 100G
    Used by attaching to the trigger gun. It is possible to switch steplessly from direct injection to fan shape. High pressure / low pressure switchable. * There are M22 and PT1 / 4 "sizes for connecting the trigger gun and variable lance. When purchasing, please check the size of the connectio... Read More
    Suitable Model  8.5 / 60 ・ 8.5 / 60P ・ 10 / 100G 
    Discontinued
  26. Rotating brush lance M22
    ASADA Rotating brush lance M22
    Discontinued
  27. Variable Lance for M22 10 / 100G
    ASADA Variable Lance for M22 10 / 100G
    Discontinued
View : Grid List
Filter

27 Item(s)

Set Ascending Direction