Clamping Washers
A washer is a thin donut-shaped part that is sandwiched between bolts and nuts. Also known as a washer. Used as a component that prevents loosening because it increases the confidentiality of the fixture and the material, making it difficult to slip. The material also has the effect of preventing the fasteners from sinking. The material is metal, rubber, silicon, polycarbonate, bark, etc. There are flat washer with flat surface, spring washer with spring action, and toothed washer with multiple teeth on the outside.
Other Related Pages
ESCO M 8 Flat WasherMaterial Hardened steel Outer Diameter (Φmm) 23 Suitable Screw M8from S$1.89Min. 2 days- MonotaRO Flat washerFor positioning jigs during cutting. * Please refrain from using it for any other purpose.Material S45C Surface Treatment Homo processing Hardness HRC 45～50 Heat Treatment Homo processing
- SUPER TOOL Flat Washer (Large Diameter Type)Type Plain washer Material S45C Finish Black dyed Heat Treatment Hardened HRC 35-45
- NEW STRONG Flat washer flat washerEliminates scratches and instability caused by direct tightening of nuts. Easy to tighten. For fixing workpieces on milling machines, machining centers, and radial drilling machines. Prevents scratches on the clamp. * If the person you hit is black leather, it will be scratched. Set it between th... Read MoreHardness HRC 30～35
- NABEYA Flat washerSurface Treatment Black dyed Hardness HRC 27～35 Heat Treatment Quenching RoHS directive (corresponding to 10 substances) Correspondence
- Iwata Mfg. Washer SUS304Applicable Standard RoHS2 RoHS directive (corresponding to 10 substances) Correspondence
- SUPER TOOL Flat washerBy combining a spherical washer and a conical sheet, stable tightening can be obtained without being affected by the parallelism of workpieces and bolts.Material S45C Finish Black dyed Hardness HRC 27～35 Heat Treatment Quenchingfrom S$2.39Min. 2 days
- Iwata Mfg. Washer black dyedMaterial S45C / Black dyed Applicable Standard RoHS2 RoHS directive (corresponding to 10 substances) Correspondence
- NABEYA Spherical washerAn average stable tightening can always be obtained without being affected by the parallelism of workpieces and bolts. Concavo-convex set.Material S45C Surface Treatment Black dyed RoHS directive (corresponding to 10 substances) Correspondencefrom S$8.19Min. 2 days
- SUPER TOOL Spherical washerSince it is a spherical type, it can handle some angles. Used for stability when tightening nuts.Material S45C Finish Black dyed Hardness HRC 27～35 Heat Treatment Quenching
-
- HALDER Spherical washer / conical sheet, similar to DIN6319, stainless steel / spherical washer stainless steel shape C / stainless steel 1.4305 (equivalent to SUS303)Shape C RoHS directive (corresponding to 10 substances) Correspondencefrom S$3.89Min. 2 days
- HALDER Spherical washer / conical sheet, DIN6319 / spherical washer hardened steel shape CShape C RoHS directive (corresponding to 10 substances) Correspondencefrom S$1.59Min. 12 days
- ESCO M 6 spherical washerFor more stable tightening. Please use it in combination with the EA637GS series.Material Hardened steel Outer Diameter (Φmm) 12 Suitable Screw M6
- ESCO M 6 Countersunk WasherFor more stable tightening. Please use it in combination with the EA637GS series.Material Hardened steel Outer Diameter (Φmm) 12 Suitable Screw M6
- NABEYA Flat washer (thick washer)Material S45C Surface Treatment Black dyed Heat Treatment Hardened HRC30 ± 5 RoHS directive (corresponding to 10 substances) Correspondencefrom S$13.99Min. 4 days
-
- NEW STRONG Spherical washerEven if the clamp is tilted, it can be tightened with a nut. Clamp and nut cushioning. * If the person you hit is black leather, it will be scratched. Set it between the clamp and the nut.from S$7.89Min. 2 days
- ESCO M 6 Flat WasherMaterial Hardened steel Outer Diameter (Φmm) 17 Suitable Screw M6from S$1.79Min. 2 days
- Accurate Wave washerMaterial SUS304CSP RoHS directive (corresponding to 10 substances) Correspondencefrom S$22.99Min. 3 days
- ESCO M16 flat washerMaterial Hardened steel Outer Diameter (Φmm) 45 Suitable Screw M16from S$3.29Min. 2 days
- HALDER Spherical washer / conical sheet, DIN6319 / conical sheet hardened steel shape DShape D RoHS directive (corresponding to 10 substances) Correspondence
- Iwata Mfg. Washer Electroless nickel platingMaterial S45C / Electroless nickel plating Applicable Standard RoHS2 RoHS directive (corresponding to 10 substances) Correspondencefrom S$2.49Min. 4 days
- ESCO M24 flat washerMaterial Hardened steel Outer Diameter (Φmm) 60 Suitable Screw M24from S$8.99Min. 2 days
- ESCO M 8 spherical washerFor more stable tightening. Please use it in combination with the EA637GS series.Material Hardened steel Outer Diameter (Φmm) 17 Suitable Screw M8from S$1.79Min. 2 days
-
- HALDER Spherical washer / conical sheet, similar to DIN6319, stainless steel / conical sheet stainless steel shape D / stainless steel 1.4305 (equivalent to SUS303)Shape D RoHS directive (corresponding to 10 substances) Correspondencefrom S$3.89Min. 2 days
- ESCO M14 flat washerMaterial Hardened steel Outer Diameter (Φmm) 40 Suitable Screw M14from S$3.09Min. 2 days
- NABEYA Split washer for jigMaterial S45C Surface Treatment Black dyed Heat Treatment Hardened HRC30 ± 5 RoHS directive (corresponding to 10 substances) Correspondencefrom S$12.99Min. 4 days
- ESCO M12 dish washerFor more stable tightening. Please use it in combination with the EA637GS series.Material Hardened steel Outer Diameter (Φmm) 24 Suitable Screw M12from S$2.69Min. 3 days
- SUPER TOOL Flat washerIt is a hardened washer. Used for stability when tightening nuts.from S$5.69Min. 2 days
- IMAO BJ742 spherical washerIt is a RoHS directive compliant product.Material S45C Mass (g) 7 Inner Diameter (Φmm) 12 Outer Diameter (Φmm) 6 Surface Treatment Iron oxide coating Hardness HRC 35～40 Heat Treatment Quenching and tempering Dimension R R25 Dimension θ 3 Dimension θ1 ° 140from S$8.39Min. 7 days
- ESCO M20 flat washerMaterial Hardened steel Outer Diameter (Φmm) 50 Suitable Screw M20from S$5.99Min. 2 days
- HALDER Flat washer, precision type / stainless steel 1.4305 (SUS303 equivalent)RoHS directive (corresponding to 10 substances) Correspondencefrom S$8.49Min. 12 days
-
- HALDER Washer with countersink / stainless steel 1.4305 (SUS303 equivalent)RoHS directive (corresponding to 10 substances) Correspondencefrom S$5.59Min. 12 days
- ESCO M12 flat washerMaterial Hardened steel Outer Diameter (Φmm) 35 Suitable Screw M12
- ESCO M10 Flat WasherMaterial Hardened steel Outer Diameter (Φmm) 28 Suitable Screw M10from S$1.99Min. 3 days
- ESCO M 8 dish washerFor more stable tightening. Please use it in combination with the EA637GS series.Material Hardened steel Outer Diameter (Φmm) 17 Suitable Screw M8
- HALDER Flat washer, DIN6340 heat treatedRoHS directive (corresponding to 10 substances) Correspondencefrom S$1.59Min. 8 days
