Stud Bolts

For positioning jigs during mold processing. * Please refrain from using it for any other purpose.

There are threads on both ends. When the screw on the tightening side is tired, it can be used on the T-nut side. Tightening the clamp * If the object to be tightened is slanted, be careful when tightening.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.

Ideal for jig clamping. Bolts used to connect the jig and tool body to the table to fix the workpiece.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.

Ideal for jig clamping. Bolts used to connect the jig and tool body to the table to fix the workpiece.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.

Based on JIS B 1177.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. Bolts do not stick out from the T-slot nut and do not damage the bottom of the table

Since the screw is inch size, it can be clamped quickly. For milling machines. To the machining center. For polishing machines. For radial drilling machines.

It is a RoHS directive compliant product.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.

We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.

Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.