Website Maintenance Announcement

How to Use
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Clamping Bolts

Bolts are one of the screw parts that fasten and fix members such as wood, metal, and plastic. Except for special shapes, the metal bar has a head at one end and is threaded throughout. Used in combination with nuts and embedded in parts. Widely used because it can be disassembled and retightened. The material is carbon, alloy, stainless steel and other lightweight aluminum and titanium. Surface treatment such as plating is applied to prevent corrosion and rust. Types include hexagon bolts, stud bolts with screws at both ends, T-slot bolts and many others.

Other Related Pages

  1. m20 bolt head size
  2. m18 bolt head size
View : Grid List
Filter

Items 1 - 40 of 310

Page
Set Ascending Direction
  1. Stud Bolt
    MonotaRO Stud Bolt
    For positioning jigs during mold processing. * Please refrain from using it for any other purpose.
    Material  S45C  Surface Treatment  Homo processing  Hardness HRC  25～30  Heat Treatment  Yes 
    Rating:
    85%
    (27)
    from S$2.49
    Min. 2 days
  2. T Slot Bolt
    SUPER TOOL T Slot Bolt
    A bolt diameter of the same size as the table T-groove can be used. A special bolt made by precision forging carbon steel. For fixing the clamp (jig tool) to the table.
    Rating:
    100%
    (3)
    from S$11.99
    Min. 2 days
  3. T-slot bolt Screw M20 Total length 200 mm
    NEW STRONG T-slot bolt Screw M20 Total length 200 mm
    Thread Size  M20 
    from S$44.99
    Min. 5 days
  4. Stud Bolt
    NEW STRONG Stud Bolt
    There are threads on both ends. When the screw on the tightening side is tired, it can be used on the T-nut side. Tightening the clamp * If the object to be tightened is slanted, be careful when tightening.
    Material  S45C  Surface Treatment  Black dyed  Hardness HRC  20～25 
    Rating:
    86%
    (16)
    from S$3.89
    Min. 2 days
  5. Stud Bolt
    SUPER TOOL Stud Bolt
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.
    Material  S45C  Thread Pitch  2.5  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  26.0  Heat Treatment  Quenching  Thread Diameter d  M20 
    from S$7.89
    Min. 2 days
  6. Mechanical parts (Stainless steel all screws) ERU-300A (M = 3 pitch 0.5)
    Hirosugi-Keiki Mechanical parts (Stainless steel all screws) ERU-300A (M = 3 pitch 0.5)
    Material  Stainless steel (SUS303)  Thread Size  M3  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$5.59
    Min. 2 days
  7. Stud
    NABEYA Stud
    Material  S45C  Thread Pitch  Coarse  Surface Treatment  Black dyed  Bolt Diameter  M12  Hardness HRC  Less than 40  Heat Treatment  Quenching  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (6)
    from S$6.99
    Min. 2 days
  8. Stud
    NABEYA Stud
    Material  S45C  Thread Pitch  Coarse  Surface Treatment  Black dyed  Bolt Diameter  M8  Hardness HRC  Less than 40  Heat Treatment  Quenching  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    70%
    (2)
    from S$4.99
    Min. 2 days
  9. Stud
    NABEYA Stud
    Material  S45C  Thread Pitch  Coarse  Surface Treatment  Black dyed  Bolt Diameter  M10  Hardness HRC  Less than 40  Heat Treatment  Quenching  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    (6)
    from S$4.99
    Min. 2 days
  10. SUS stud screw
    HOSHIMOTO SUS stud screw
    Material  Stainless steel (SUS304)  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (1)
    from S$0.40
    Min. 2 days
  11. Stud
    SUPER TOOL Stud
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.
    Material  S45C  Thread Pitch  1.25  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  10.5  Heat Treatment  Quenching  Thread Diameter d  M8 
    Rating:
    100%
    (4)
    from S$4.19
    Min. 2 days
  12. Stud
    SUPER TOOL Stud
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.
    Material  S45C  Thread Pitch  1.5  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  12.5  Heat Treatment  Quenching  Thread Diameter d  M10 
    Rating:
    90%
    (4)
    from S$4.99
    Min. 2 days
  13. Stud
    SUPER TOOL Stud
    Ideal for jig clamping. Bolts used to connect the jig and tool body to the table to fix the workpiece.
    Rating:
    90%
    (2)
    from S$5.89
    Min. 2 days
  14. Stud Bolt
    SUPER TOOL Stud Bolt
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.
    Material  S45C  Thread Pitch  2.0  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  18.0  Heat Treatment  Quenching  Thread Diameter d  M16 
    Rating:
    80%
    (2)
    from S$6.79
    Min. 2 days
  15. Mechanical parts (Stainless steel all screws) ERU-400A (M = 4 pitch 0.7)
    Hirosugi-Keiki Mechanical parts (Stainless steel all screws) ERU-400A (M = 4 pitch 0.7)
    Material  Stainless steel  Thread Size  M4  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$6.99
    Min. 2 days
  16. Stat Bolt Screw M8
    TRUSCO Stat Bolt Screw M8
    Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.
    Screw Dimensions  M8  2018 Trusco page  1 1075 
    Rating:
    100%
    (2)
    from S$3.29
    Min. 2 days
  17. Stud Bolt
    SUPER TOOL Stud Bolt
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.
    Material  S45C  Thread Pitch  1.75  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  14.5  Heat Treatment  Quenching  Thread Diameter d  M12 
    from S$5.69
    Min. 2 days
  18. Stud bolt (SUS)
    NABEYA Stud bolt (SUS)
    Material  SUS316 
    Rating:
    100%
    (1)
    from S$29.99
    Min. 2 days
  19. Stat Bolt Screw M10
    TRUSCO Stat Bolt Screw M10
    Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.
    Screw Dimensions  M10  2018 Trusco page  1 1075 
    from S$3.59
    Min. 2 days
  20. Stud
    NABEYA Stud
    Material  S45C  Thread Pitch  Coarse  Surface Treatment  Black dyed  Bolt Diameter  M16  Hardness HRC  Less than 40  Heat Treatment  Quenching  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$8.39
    Min. 2 days
  21. T slot bolt
    NABEYA T slot bolt
    Material  S45C  Surface Treatment  Black dyed  Heat Treatment  Hardened HRC30 ± 5  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (1)
    from S$19.99
    Min. 2 days
  22. Stud
    SUPER TOOL Stud
    Ideal for jig clamping. Bolts used to connect the jig and tool body to the table to fix the workpiece.
    Material  S45C  Thread Pitch  1.25  Finish  Black dyed  Hardness HRC  22～26  Heat Treatment  Quenching 
    Rating:
    100%
    (4)
    from S$3.89
    Min. 2 days
  23. Mechanical parts (Brass full screw) ERB-300AC (M = 3 pitch 0.5)
    Hirosugi-Keiki Mechanical parts (Brass full screw) ERB-300AC (M = 3 pitch 0.5)
    Material  Brass  Thread Size  M3  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (1)
    from S$11.99
    Min. 2 days
  24. Stat Bolt Screw M16
    TRUSCO Stat Bolt Screw M16
    Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.
    Screw Dimensions  M16  2018 Trusco page  1 1075 
    from S$4.99
    Min. 2 days
  25. Stud (flat tip)
    NABEYA Stud (flat tip)
    Based on JIS B 1177.
    Material  SCM435  Surface Treatment  Black dyed  Heat Treatment  Hardened HRC30 ± 5  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1.39
    Min. 2 days
  26. Stat Bolt Screw M20
    TRUSCO Stat Bolt Screw M20
    Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.
    Screw Dimensions  M20  2018 Trusco page  1 1076 
    from S$6.49
    Min. 2 days
  27. Stud
    SUPER TOOL Stud
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. Bolts do not stick out from the T-slot nut and do not damage the bottom of the table
    Material  S45C  Thread Pitch  3.0  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  33.5  Heat Treatment  Quenching  Thread Diameter d  M24 
    from S$15.99
    Min. 2 days
  28. Stat Bolt
    NEW STRONG Stat Bolt
    Since the screw is inch size, it can be clamped quickly. For milling machines. To the machining center. For polishing machines. For radial drilling machines.
    Rating:
    100%
    (1)
    from S$7.89
    Min. 2 days
  29. Straight stud
    HOSHIMOTO Straight stud
    Material  Iron (SS)  Surface Treatment  Copper plating  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$0.17
    Min. 9 days
  30. BJ745 Stud bolt
    IMAO BJ745 Stud bolt
    It is a RoHS directive compliant product.
    Material (Main Unit)  SCM435  Mass (g)  30  Surface Treatment (Main Unit)  Iron oxide coating  Heat treatment (main body)  Quenching and tempering  Hardness (body)  HRC33～39 
    Rating:
    100%
    (3)
    from S$4.19
    Min. 7 days
  31. Stud Bolt
    SUPER TOOL Stud Bolt
    Thread Pitch  1.75  Hardness HRC  22～26  Heat Treatment  Quenching 
    from S$5.59
    Min. 2 days
  32. Stat Bolt Screw M12
    TRUSCO Stat Bolt Screw M12
    Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.
    Screw Dimensions  M12  2018 Trusco page  1 1075 
    Rating:
    100%
    (1)
    from S$4.19
    Min. 2 days
  33. Stud
    SUPER TOOL Stud
    Material  S45C  Thread Pitch  2.5  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  22.0  Heat Treatment  Quenching  Thread Diameter d  M18 
    Rating:
    80%
    (2)
    from S$8.69
    Min. 2 days
  34. Mechanical parts (Stainless steel all screws) ERU-500A (M = 5 pitch 0.8)
    Hirosugi-Keiki Mechanical parts (Stainless steel all screws) ERU-500A (M = 5 pitch 0.8)
    Material  Stainless steel (SUS303)  Thread Size  M5  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$7.29
    Min. 14 days
  35. Stud
    SUPER TOOL Stud
    We perform perfect heat treatment using special rods. Since the threaded part is rolled, there is no wear or distortion. You can use it semi-permanently. You can use one bolt for long and short. The bolt does not stick out from the T-slot nut and does not damage the bottom of the table.
    Material  S45C  Thread Pitch  2.0  Finish  Black dyed  Hardness HRC  22～26  Dimension l2 (mm)  16.5  Heat Treatment  Quenching  Thread Diameter d  M14 
    Rating:
    100%
    (2)
    from S$6.49
    Min. 2 days
  36. Mechanical parts (Stainless steel all screws) ERU-600A (M = 6 pitch 1.0)
    Hirosugi-Keiki Mechanical parts (Stainless steel all screws) ERU-600A (M = 6 pitch 1.0)
    Material  Stainless steel  Thread Size  M6  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$9.29
    Min. 12 days
  37. Mechanical parts (Brass full screw) ERB-400A (M = 4 pitch 0.7)
    Hirosugi-Keiki Mechanical parts (Brass full screw) ERB-400A (M = 4 pitch 0.7)
    Material  Brass  Thread Size  M4  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (1)
    from S$5.99
    Min. 10 days
  38. Stat Bolt Screw M18
    TRUSCO Stat Bolt Screw M18
    Threads of the same length are cut on both ends. The screw diameter and body diameter are the same, so it is difficult to damage the screw during storage. Tightening the clamp of the work piece.
    Screw Dimensions  M18 
    from S$6.19
    Min. 2 days
  39. Stud
    NABEYA Stud
    Material  S45C  Thread Pitch  Coarse  Surface Treatment  Black dyed  Heat Treatment  Quenching  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    (1)
    from S$11.99
    Min. 4 days
  40. SHS Hex Stud Bolt
    NBK (Nabeya Bi-tech Kaisha) SHS Hex Stud Bolt
    from S$4.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 310

Page
Set Ascending Direction
Filter by categories
T-Slot Bolts
(123)
T-Slot Bolts
Stud Bolts
(187)
Stud Bolts