T-Slot Nuts

The size down type has a female thread processing that is smaller than the female thread size of a general T groove. Please use it when downsizing, such as attaching M12 parts to the T groove for M16. It is a RoHS directive compliant product.

For positioning jigs during mold processing. * Please refrain from using it for any other purpose.

In order to prevent the T-groove from being damaged due to the bolt protruding, the specifications are such that the bolt does not penetrate.

It is crimped so that the bolts do not stick out and damage the machine table. Secure the bolts to the T-groove table.

It is crimped so that the bolts do not stick out and damage the machine table.

Since the bolt does not penetrate, it will not damage the bed. For fixing workpieces on milling machines and drilling machines. For fixing bolts for T-grooves. * If the object to be tightened is slanted, be careful when tightening. Make sure the bolt reaches the bottom of the nut.

The screw hole penetrates.

Since it is not hardened, tap holes suitable for the application can be easily drilled.

Since the screw penetrates, there are many contact surfaces. This is convenient when using cap bolts. Secure the bolts to the T-groove table.

It can be set in the T-groove without breaking the clamp set from the top of the bed. It has the same bolt penetration prevention specifications as the normal T-nut. Bolt fixing nut for T-groove. It is used when an additional clamp location occurs after the clamp is completed. * If the object to ... Read More

Since it can be inserted from the top of the T-groove, it is convenient for use on a horizontally long table. Since the adhesive area in the T-groove is small, tightening is easy.

Since the screw is inch size, it can be clamped quickly. Secure the bolts to the T-groove table.

When unclamping, the tip of the clamp is lifted by the O-ring.

In order to prevent the T-groove from being damaged due to the bolt protruding, the specifications are such that the bolt does not penetrate.

Since the screw hole does not penetrate, the T groove will not be damaged. For fixing bolts for T-grooves. For fixing bolts for T-grooves of machine tools, radial drilling machines, etc.

The screw holes do not penetrate to protect the T-groove damage caused by the bolt popping out. Secure the bolts to the T-groove table.

Since it is not hardened, you can easily open a tap that suits your purpose.

Ideal for clamping thin workpieces. Setup is easily completed by using the T-groove. Tightening can be started immediately by tightening the enamel screw with a wrench.