Toggle Clamps
Toggle clamps are devices that press down by moving the handle. It is used as a jig and fixture, and is used in a wide range of fields, including automobiles, shipbuilding, and general machinery manufacturing. Since there are horizontal and vertical directions of the handle and the direction of pressing, select according to the direction you want to press. In addition, since the tightening pressure is large and small, select the strength according to the situation. If it is difficult to press down directly with metal bolts, it is safe to choose a type that has a rubber pad attached to the clamp bolt.
Other Related Pages
- MonotaRO Vertical Toggle ClampDownward pressure type toggle clamp. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Type Downward pressure type Material (Handle) PVC Base Flange
- MonotaRO Side push type toggle clamp* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Type Side push type Material (Handle) PVC Base Flange
- KAKUTA Push Type Toggle ClampSide-push type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not to get your hands caught.
- KAKUTA Hold Down Handle Horizontal Toggle ClampHighly versatile downward presser type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. The tightening pressure becomes weaker toward the tip of the clamp arm. Pleas... Read More
- MonotaRO Vertical Toggle Clamp 200K* Do not use for anything other than its intended purpose.Included Accessories Spindle (M8 × 50 P = 1.25) Material (Main Unit) SS400 (Unichrome) Mass (g) 370 Type Down pressure type Material (Handle) PVC Spindle Spindle (M8 × 50 P = 1.25) Clamping Pressure (kN [kgf]) 2.0[200] Base Flange Clamp Arm Movement Angle (°) 94 Handle Operation Angle (°) 54
- MonotaRO Downward holding type toggle clamp 50K* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Mass (g) 60 Type Downward holding type Material (Handle) PVC Spindle Spindle M5 × 37 P = 0.8 Clamping Pressure (kN [kgf]) 0.5[50] Base Flange Clamp Arm Movement Angle (°) 100 Handle Operation Angle (°) 56
- KAKUTA Rubber bolt for toggle clampMaterial (Rubber) NBR (Nitrile Rubber) Rubber hardness Shore 70 degrees
- MonotaRO Vertical Toggle Clamp (Round Grip)* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Type Downward holding type Material (Handle) PVC Base Flange
- IMAO Horizontal toggle clampMaterial (Main Unit) SPCC Material (Grip) PVC Material (Bolt) SUM41 Material (Nut) SPCC Material (pad) Chloroprene rubber (CR)
- KAKUTA Hold Down Handle Vertical Toggle ClampHighly versatile downward presser type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. The tightening pressure becomes weaker toward the tip of the clamp arm. Pleas... Read Morefrom S$26.99Min. 2 days
- MonotaRO Downward press type toggle clamp 100K* Do not use for anything other than its intended purpose.Included Accessories Spindle (M6 × 40 P = 1.0) Material (Main Unit) SS400 (Unichrome) Mass (g) 200 Type Down pressure type Material (Handle) PVC Spindle Spindle (M6 × 40 P = 1.0) Clamping Pressure (kN [kgf]) 1.0[100] Base Flange Clamp Arm Movement Angle (°) 120 Handle Operation Angle (°) 72
- MonotaRO Hook type toggle clamp* Do not use for anything other than its intended purpose.Included Accessories Nut M5 P = 0.8 Material (Main Unit) SS400 (Unichrome) Mass (g) 209 Type Hook type Material (Handle) PVC Clamping Pressure (kN [kgf]) 3.18[318] Base Flange
- SUPER TOOL Bolt / Nut (with Rubber Head)Toggle clamp parts * TNG0422 has one nut. One of the nuts of TNG0425, TNG0442, and TNG0425 is a square nut.from S$3.39Min. 2 days
- MonotaRO Side Toggle ClampSide-push type toggle clamp. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Type Side push type Material (Handle) PVC Clamping Pressure (kN [kgf]) 0.5[50] Base Flange
- IMAO Pull type toggle clampMaterial (Main Unit) SPCC(ST-PAH341:SPHD) Material (Grip) PVC Material (U bolt) SUM41
- KAKUTA Hold Down Handle Vertical Toggle ClampSmall downward presser type toggle clamp. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. The tightening pressure becomes weaker toward the tip of the clamp arm. Please note that... Read More
- MonotaRO Downward holding type toggle clamp 280K* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Mass (g) 435 Type Downward holding type Material (Handle) PVC Spindle Spindle M8 × 65 P = 1.25 Clamping Pressure (kN [kgf]) 2.8[280] Base Flange Clamp Arm Movement Angle (°) 79 Handle Operation Angle (°) 87
- IKURA SEIKI Toggle Clamp Rubber Bolt* A set of rubber bolts and nuts. * M4 nuts are 1 hexagon and 1 square. * When using rubber bolts, the tightening pressure is lower than that of normal bolts.
- NABEYA Rubber Cap 6893RoHS directive (corresponding to 10 substances) Correspondence
- SUPER TOOL Toggle Clamp Side Press TypeStainless steel is used for the caulking pins of all models to support long-term use. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. * The listed bearing capacity is displayed as the highest value. Please note that the value will decrease depending on the push ... Read More
- KAKUTA Pull Type ClampHook type toggle clamp. Clamp by hooking a fixed object with a U-shaped hook type bar. Machine parts Can be used as equipment parts. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not to get your hands caught.from S$33.99Min. 2 days
- MonotaRO Downward holding type toggle clamp 91K* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Mass (g) 159 Type Downward holding type Material (Handle) PVC Spindle Spindle M6 × 44 P = 1.0 Clamping Pressure (kN [kgf]) 0.91[91] Base Flange Clamp Arm Movement Angle (°) 95 Handle Operation Angle (°) 60
- MonotaRO Downward pressing toggle clamp 250K* Do not use for anything other than its intended purpose.Included Accessories Spindle (M6 × 50 P = 1.0) Material (Main Unit) SS400 (Unichrome) Mass (g) 190 Type Down pressure type Material (Handle) PVC Spindle Spindle (M6 × 50 P = 1.0) Clamping Pressure (kN [kgf]) 2.5[250] Base Flange Clamp Arm Movement Angle (°) 77 Handle Operation Angle (°) 85
- MonotaRO Downward holding type toggle clamp 500K* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Mass (g) 743 Type Downward holding type Material (Handle) PVC Spindle Spindle M10 × 65 P = 1.5 Clamping Pressure (kN [kgf]) 5[500] Base Flange Clamp Arm Movement Angle (°) 66 Handle Operation Angle (°) 83
- MonotaRO Side push toggle clamp (horizontal lever)* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Mass (g) 54 Type Side push type Material (Handle) PVC Spindle Spindle M4 × 18 P = 0.7 Clamping Pressure (kN [kgf]) 0.5[50] Base Flange Handle Operation Angle (°) 180
- KAKUTA Side Press ClampToggle clamp for pushing and pulling bracket mounting. Ideal for inspection jigs, welding jigs, other assembly jigs, and processing jigs. Can also be used for woodworking and DIY. The tightening pressure shown is a guide. Impact, vibration, and internal pressure may cause damage. Be careful not t... Read MoreType of Terminal Fitting Bracket RoHS directive (corresponding to 10 substances) Correspondencefrom S$36.99Min. 2 days
- SUPER TOOL Bolt / Nut (with swivel head)Toggle clamp partsSpecification The swivel angle is 7 °. Material Rolled steel for structural use Inclination angle (°) 7from S$6.99Min. 2 days
- MonotaRO Side push toggle clamp (pull lever)* Do not use for anything other than its intended purpose.Material (Main Unit) SS400 (Unichrome) Mass (g) 41 Type Side push type Material (Handle) PVC Spindle Spindle M4 × 18 P = 0.7 Clamping Pressure (kN [kgf]) 0.45[45] Base Flange Handle Operation Angle (°) 190
- MonotaRO Push and pull toggle clampA clamp for both pushing and pulling. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.Material (Main Unit) SS400 Type For both push and pull Type of Terminal Fitting Bracket Material (Handle) PVCfrom S$15.99Min. 2 days
- SPEEDY B Contact bolt with speedy block rubber capFor clamps such as finished surfaces. Used by attaching to a hollow clamp arm.Set Contents 2 nuts Material Steel 2018 Trusco page 4 1732from S$5.39Min. 2 days
- MonotaRO Downward pressure type toggle clamp + vertical handle typeVertical handle type downward pressure type toggle clamp. The push position can be adjusted with the bolt and nut at the tip. For various fixing and temporary holding of metal and wood. * Do not use for anything other than its intended purpose.Material (Main Unit) SUS304 Type Downward pressure type Material (Handle) PVC Base Flangefrom S$24.99Min. 2 days