All Category

Other Parts for Die

View : Grid List
Filter

Items 1 - 40 of 118

Set Ascending Direction
  1. Stripper Bolt (Polished Type)
    Ohkita Stripper Bolt (Polished Type)
    Integrated type, the body is polished and finished. It is especially designed to withstand repeated impacts in the pulling direction. Mainly used to hold the stripper plate of the mold
    Material  SCM435  Hardness  HRC34~44 
    Rating:
    95%
    from S$1.29
    Min. 2 days
  2. Space Ring ESR
    CHAMPION CORPORATION Space Ring ESR
    Hardness  Material  S45C  Dimension T (mm)  4(+0.02~+0.01) 
    Rating:
    96%
    from S$1.99
    Min. 2 days
  3. Shoulder bolt SH (Iron / Black oxide film)
    Gosho Shoulder bolt SH (Iron / Black oxide film)
    Surface Treatment  Black oxide film  Material  Iron  Head Shape  Shoulder bolt 
    Rating:
    84%
    from S$4.89
    Min. 2 days
  4. Shoulder Bolt TSB (Iron / Plain)
    Osaka Spirit Shoulder Bolt TSB (Iron / Plain)
    Material  Iron  Thread Type  Meter coarse  Surface Treatment  Phosphate  Head Shape  Shoulder bolt  Type  TSB 
    Rating:
    94%
    from S$4.89
    Min. 2 days
  5. Plastic LPLP for plastic
    CHAMPION CORPORATION Plastic LPLP for plastic
    Replacement resin for the outer part of the Plalock PLL.
    Color  Orange 
    Rating:
    100%
    from S$56.99
    Min. 2 days
  6. Seat set type screw
    HAYASHI Seat set type screw
    Hardness  HRC34~43  Surface Treatment  Iron oxide coating 
    Rating:
    93%
    from S$1.79
    Min. 2 days
  7. Plastic lock A type
    CHAMPION CORPORATION Plastic lock A type
    It is a part for pulling. It can be adjusted freely with the adjustment bolt. It can also be readjusted during use. * Adjustment is required about once every 50,000 shots.
    Material  Resin part 66 nylon 
    Rating:
    60%
    from S$119.90
    Min. 2 days
  8. FSS / FST-V scale sticker
    NBK (Nabeya Bi-tech Kaisha) FSS / FST-V scale sticker
    from S$3.99
    Min. 2 days
  9. FSS / FST scale sticker
    NBK (Nabeya Bi-tech Kaisha) FSS / FST scale sticker
    Rating:
    80%
    from S$3.99
    Min. 2 days
  10. FSP scale plate
    NBK (Nabeya Bi-tech Kaisha) FSP scale plate
    Rating:
    100%
    from S$3.09
    Min. 2 days
  11. Lapok (perforated type)
    HAYASHI Lapok (perforated type)
    The compression deflection is deeper than that of polyurethane (about 50%), and a strong compressive load that is not normally found in rubber can be obtained. (Approximately twice as much as normal rubber) It changes linearly up to around 50% compression, and even when used with a maximum load o... Read More
    Material  High hardness urethane foam 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  12. Set screw
    HAYASHI Set screw
    Hardness  HRC34~43  Surface Treatment  Iron oxide coating 
    Rating:
    100%
    from S$0.18
    Min. 2 days
  13. P-LOCK PL
    CHAMPION CORPORATION P-LOCK PL
    Hardness  Claw / Roller: 58-60HRC  Material  Claw: SCM415 Body: SCM435 Roller: SKH51 
    from S$199.90
    Min. 2 days
  14. Lapok (no hole type)
    HAYASHI Lapok (no hole type)
    The compression deflection is deeper than that of polyurethane (about 50%), and a strong compressive load that is not normally found in rubber can be obtained. (Approximately twice as much as normal rubber) It changes linearly up to around 50% compression, and even when used with a maximum load o... Read More
    Material  High hardness urethane foam 
    from S$12.99
    Min. 2 days
  15. Short length set screw
    HAYASHI Short length set screw
    Hardness  HRC34~43  Surface Treatment  Iron oxide coating 
    from S$0.81
    Min. 5 days
  16. Eyebolt
    TOCHIGIYA Eyebolt
    A hook used for moving, towing, and installing equipment and vehicles. Machine tools, large computers, large housings, agricultural equipment, industrial vehicles, large control panels, medical equipment, etc.
    RoHS Directive  10 substances  Included Accessories  Spring washer, flat washer, nut 1 each 
    from S$3.09
    Min. 2 days
  17. Smart-Zee
    NBK (Nabeya Bi-tech Kaisha) Smart-Zee
    from S$149.90
    Min. 4 days
  18. Locate ring LRB
    CHAMPION CORPORATION Locate ring LRB
    For aligning the molding machine and the mold.
    Material  S45C  Hardness 
    from S$7.99
    Min. 2 days
  19. Sprue Bushing SBS (JIS bolt type)
    CHAMPION CORPORATION Sprue Bushing SBS (JIS bolt type)
    Hardness  Material  S45C 
    from S$48.99
    Min. 5 days
  20. Grab Screw with Thrust Pad (Stainless Steel Grab Screw)-Ball Point Type
    NBK (Nabeya Bi-tech Kaisha) Grab Screw with Thrust Pad (Stainless Steel Grab Screw)-Ball Point Type
    Thread Standard  Coarse 
    from S$6.39
    Min. 5 days
  21. Mold storage cover Die guard
    HAYASHI Mold storage cover Die guard
    Would you like to improve the rain? "Organize" Prevent rain, wind and dust and prevent rust. Easy to install with Velcro! Uses UV protection sheet and material with excellent wear resistance. With a convenient pocket for management.
    from S$249.90
    Min. 4 days
  22. Scale plate (vertical)
    NBK (Nabeya Bi-tech Kaisha) Scale plate (vertical)
    from S$3.49
    Min. 2 days
  23. FSP-V scale plate
    NBK (Nabeya Bi-tech Kaisha) FSP-V scale plate
    from S$3.09
    Min. 2 days
  24. Grub Screw with Thrust Pad-Thrust Point Type
    NBK (Nabeya Bi-tech Kaisha) Grub Screw with Thrust Pad-Thrust Point Type
    Thread Standard  Coarse 
    Rating:
    100%
    from S$8.79
    Min. 5 days
  25. Cooling water cap PT
    CHAMPION CORPORATION Cooling water cap PT
    Material  Brass 
    from S$1.49
    Min. 2 days
  26. Scale plate (horizontal)
    NBK (Nabeya Bi-tech Kaisha) Scale plate (horizontal)
    from S$3.49
    Min. 2 days
  27. Tensile link set TLS
    CHAMPION CORPORATION Tensile link set TLS
    Hardness  32~35HRC  Set Contents  Link 2 / Retainer 4  Material  S45C 
    Rating:
    100%
    from S$32.99
    Min. 5 days
  28. Grab Screw with Thrust Pad-Ball Point Type
    NBK (Nabeya Bi-tech Kaisha) Grab Screw with Thrust Pad-Ball Point Type
    Thread Standard  Coarse 
    from S$4.89
    Min. 5 days
  29. Cam latch (made of zinc die casting)
    NBK (Nabeya Bi-tech Kaisha) Cam latch (made of zinc die casting)
    from S$2.79
    Min. 2 days
  30. Adjuster guide movable
    HAYASHI Adjuster guide movable
    from S$17.99
    Min. 2 days
  31. Timing cam
    TAIYO KIKAI Timing cam
    TMC type (for contacts) Made of resin (inside metal bush), ideal for micro switches, etc. TPC type (for non-contact) Made of steel, ideal for photoelectric switches, proximity switches, etc. * Please adjust the timing by using as a set of 2 sheets.
    from S$38.99
    Min. 2 days
  32. Straight crank
    NBK (Nabeya Bi-tech Kaisha) Straight crank
    Material  Made of steel 
    from S$55.99
    Min. 5 days
  33. Dowel pin fall prevention plug
    HAYASHI Dowel pin fall prevention plug
    Used in places where the knock pin may fall and damage the mold. In addition, compared to the conventional holoset stopper, there is no need for thread cutting or screwing, so the processing process and work process are reduced, and the overall work time is shortened.
    Material  SAE1065 
    from S$1.19
    Min. 5 days
  34. Ainut
    TOCHIGIYA Ainut
    A hook used for moving, towing, and installing equipment and vehicles. Machine tools, large computers, large housings, agricultural equipment, industrial vehicles, large control panels, medical equipment, etc.
    RoHS Directive  10 substances 
    from S$3.49
    Min. 9 days
  35. Wear plate
    HAYASHI Wear plate
    By embedding a special solid lubricant in the metal casting base material, it exhibits excellent lubrication performance without lubrication even under harsh conditions. We have also reviewed the number of special solid lubricants to achieve better sliding performance.
    Material  FC250 special solid lubricant (buried) 
    from S$12.99
    Min. 5 days
  36. Eyebolt (chief)
    TOCHIGIYA Eyebolt (chief)
    Since the threaded part is longer than the JIS standard, it can be used for thick panels. Switchboards, distribution boards, control boards, machine tools, etc.
    RoHS Directive  10 substances  Dimension J (mm)  50  Included Accessories  Spring washer, flat washer, nut 1 each 
    from S$4.89
    Min. 13 days
  37. Offset crank
    NBK (Nabeya Bi-tech Kaisha) Offset crank
    Material  Made of steel 
    from S$56.99
    Min. 5 days
  38. Whetstone PCW for pin cutter
    CHAMPION CORPORATION Whetstone PCW for pin cutter
    For pin cutter
    from S$169.90
    Min. 5 days
  39. A loose punch
    KOSHUHA PRECISION A loose punch
    from S$14.99
    Min. 5 days
  40. A loose punch
    KOSHUHA PRECISION A loose punch
    Material  SKH51 
    from S$14.99
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 118

Set Ascending Direction