Cross Clamps
NBK (Nabeya Bi-tech Kaisha) Cross clamperA clamper that connects two shafts to a cross. Clamping type. Easy to install and remove the shaft. Moreover, it does not damage the shaft. Convenient for adjusting side guides and sensors on the transport line. Made of lightweight aluminum, it can be used for both round and square shafts.Material (Main Unit) Aluminum (A6063) Finish Body: Barrel polishing Included Accessories Hexagon socket head cap screw Material (Screw) SUS304from S$25.99Min. 2 days- NBK (Nabeya Bi-tech Kaisha) Cross clamperA clamper that connects two shafts to a cross. Clamping type. Easy to install and remove the shaft. Moreover, it does not damage the shaft. Convenient for adjusting side guides and sensors on the transport line. Made of stainless steel with excellent corrosion resistance, it can be used for both ... Read MoreFinish Body: Barrel polishing Included Accessories Hexagon socket head cap screw Material (Screw) SUS304 Material (Main Unit) Stainless steel (SUS304)from S$35.99Min. 2 days
- TOCHIGIYA Rod holderA one-touch operation rod connection bushing that eliminates the hassle of caulking. A bushing with a constant movement that eliminates malfunctions caused by caulking variations. It leads to cost reduction because it can save labor. Ideal for force transmission mechanisms using switchboards, dis... Read MoreRoHS Directive 10 substances Material PA Surface Treatment Primary colorfrom S$0.49Min. 2 days
- NBK (Nabeya Bi-tech Kaisha) Cross clamperA clamper that connects two shafts to a cross. Secure the shaft with the set screw. It has excellent cost performance. Convenient for adjusting side guides and sensors on the transport line. Made of lightweight aluminum, it can be used for both round and square shafts.Material (Main Unit) Aluminum (A6063) Finish Body: Barrel polishing Included Accessories Hexagon socket head set screw Material (Screw) SUS304from S$24.99Min. 2 days
- IMAO ID clampThe work can be clamped from the inside. By self-cutting the clamp part, it corresponds to a wide variety of work diameters.from S$119.90Min. 2 days
- Mitsuboshi Belting Sleeve rollIt is a press-fit type roller coating material and cushioning material with a completely new concept, in which two layers of mild steel urethane are integrally molded. It can be easily attached by simply press-fitting it into an iron core or roller, and it also demonstrates a strong grip. It is v... Read MoreHardness (Outside / inside) 80/86 Width (mm) 50 Color (Outside / Inside) Gray / Blue Wall Thickness (mm) 5from S$22.99Min. 2 days
- NBK (Nabeya Bi-tech Kaisha) Cross clamperA clamper that connects two shafts to a cross. Secure the shaft with the set screw. It has excellent cost performance. Convenient for adjusting side guides and sensors on the transport line. Made of stainless steel with excellent corrosion resistance, it can be used for both round shafts and squa... Read MoreFinish Body: Barrel polishing Included Accessories Hexagon socket head set screw Material (Screw) SUS304 Material (Main Unit) Stainless steel (SUS304)from S$32.99Min. 4 days
- TOCHIGIYA Rod assemblyA link-type lock bracket that firmly stops the box door at three points. Please use with the handle. Switchboard, control panel, instrument panel box, etc.RoHS Directive 10 substances Mass (g) 1088 Parts Name Fasteners, rods, round rivets Material SPCC、SWRM、S Surface Treatment Trivalent chromatefrom S$17.99Min. 5 days
- No Brand Spacer block Through-hole type (electroless nickel plating)Dimension L (mm) A-(2×X) Surface Treatment Electroless nickel plating Material SS400 Type Through holefrom S$29.99Min. 11 days
- TOCHIGIYA rodRoHS Directive 10 substances Surface Treatment Trivalent chromatefrom S$5.99Min. 5 days
- Miyoshi Machinery UPA type (general-purpose type, cleaving)Easy to support fixed bearing outer diameters such as bearings and shafts Please use UPA as a set of 2 to maintain the core high accuracy (B dimension) at the time of mounting.Tolerance Φd H7from S$48.99Min. 2 days
- Miyoshi Machinery UPW type (general-purpose type, split tightening)Easy to support fixed bearing outer diameters such as bearings and shaftsTolerance Φd H7from S$38.99Min. 5 days
- Miyoshi Machinery URA type (fixed type, press fit)Compatible with fixed bearing outer diameters that require accuracy Please use URA as a set of 2 to maintain the core high accuracy (B dimension) at the time of mounting.Tolerance Φd Js6from S$33.99Min. 2 days
- Miyoshi Machinery NXO slide NXFT seriesEasy to reproduce the position without turning. It also functions for rotation transmission and expansion and contraction. Both the sleeve and shaft can be cut at any position.from S$169.90Min. 5 days
- IMAO Adjust toe clampBy reversing the clamp jaw, it can be used for both the finished surface and the black leather surface of the work. A secure clamp can be made downward.from S$169.90Min. 3 days
- No Brand Spacer block tap type (iron trioxide coating)Dimension L (mm) A-(2×X) Surface Treatment Iron oxide coating Material SS400 Type Tapfrom S$25.99Min. 11 days
- No Brand Spacer block Through-hole type (iron trioxide coating)Dimension L (mm) A-(2×X) Surface Treatment Iron oxide coating Material SS400 Type Through holefrom S$25.99Min. 11 days
- TOCHIGIYA Rod catchRod rods for TEA-1160-08, TEA-1160-09, TEA-1121-71 * A catch for the rod used with the swing handle.RoHS Directive 10 substances Mass (g) 36 Surface Treatment Painting (black) Material ZDCfrom S$4.89Min. 5 days
- Miyoshi Machinery FPA type (Flange type, Cleavage)Easy to support fixed bearing outer diameters such as bearings and shafts Please use FPA as a set of twoTolerance Φd H7from S$33.99Min. 2 days
- No Brand Spacer block tap type (electroless nickel plating)Surface Treatment Electroless nickel plating Material SS400 Type Tapfrom S$27.99Min. 11 days
-
- TOCHIGIYA Rod blank processed productIt is a 3P latching system product. The flat latch (THA-282) has a built-in link mechanism, and when combined with the latch lock (THA-284), the door is securely fixed by a three-way latch. In addition, the rod for connecting the latch lock and the flat latch uses a rod holder on the flat latch s... Read MoreRoHS Directive 10 substances Material ZDC、SPCC、S、C3713、PAfrom S$29.99Min. 5 days
-
- TOCHIGIYA Rod rodIt can be stopped at 2 or 3 points by combining with a flat latch or various handles. THA-315, flat latch, various handles, etc.RoHS Directive 10 substances Mass (g) 30 Material SWRM Surface Treatment Trivalent chromatefrom S$2.59Min. 5 days
- Miyoshi Machinery URW type (fixed type, press-fit)Compatible with fixed bearing outer diameters that require accuracyTolerance Φd Js6from S$24.99Min. 7 days
- TOCHIGIYA Rod blankIt is a 3P latching system product. The flat latch (THA-282) has a built-in link mechanism, and when combined with the latch lock (THA-284), the door is securely fixed by a three-way latch. In addition, the rod for connecting the latch lock and the flat latch uses a rod holder on the flat latch s... Read MoreRoHS Directive 10 substances Dimension L (mm) 1000 Material ZDC、SPCC、S、C3713、PAfrom S$6.19Min. 5 days
-
- IMAO Side lock adapter for lathesPlease use it as a lathe adapter for MBID02 to MBID08ID clamps. By turning the drive screw with a wrench, the cylinder strokes up and down, so the taper bolt of the MBIDID clamp also strokes at the same time, expanding the base. Since the clamp and unclamp are operated from the side of the main b... Read MoreRoHS Directive 10 substances Hardness (cylinder) HRC40～45 Hardness (drive screw) HRC48～52 Surface Treatment (Main Unit) Iron oxide coating Surface treatment (cylinder) PTFE coating Surface treatment (drive screw) PTFE coating Material (cylinder) S17C Material (drive screw) SCM435 Material (Main Unit) SUM24Lfrom S$329.90Min. 6 days
-
-
-
