Framing Systems
This category includes metal struts, pipes and pipe connection parts, such as struts and clamps. There are hexagonal support and circular support in the metal support. Since the end is threaded, select a screw or female thread as necessary. Widely used as a support to support the structure of various machinery. This category also includes clamps, which are parts that connect shafts together. Cross clamper connected to the cross or T-cross clamper connected to the T-shape. Various other pipe fixing brackets are also available.
Other Related Pages
- SUS GF-SF connector L slot SIt is a part for connecting the green frame S and SF frame (square aluminum structural material). The long type is a GF-SF connector that can be adjusted in position by loosening the bolts even after connecting with the connector.from S$2.39Min. 11 days
- SPACIO Plastic jointA plastic joint that is fixed to the pipe with a special adhesive. (For corners) * Please bond with Spacia's special adhesive (SA-30, SA-50, SA-100, SA-1000).
- TMEH JAPAN Inner CapIt fits into the end of the pipe to prevent injury and foreign matter from getting inside the pipe.Material Low density polyethylene Mass (g) 3
- SUS GF 5 bottle setGF series standard frame. The most versatile 28mm type that has both functionality and strength.
- TMEH JAPAN GA-2S Set ProductIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 224
- SPACIO Plastic joint cap for Φ28 pipe (inner cap)Suitable Pipe Standard pipe for Spacia pipe system
- TMEH JAPAN GA-15S Set ProductIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 90
- TMEH JAPAN GA-1S Set ProductIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 136
- NBK (Nabeya Bi-tech Kaisha) DPC pipe end capA plastic cap that attaches to the tip of the aluminum pipe DAP. To install, just press fit. Beautifully decorates the tip of the aluminum pipe.Material / Finish Polyethylene (matte black)
- SPACIO Metal JointA metal joint is a set joint consisting of multiple parts. Use a hexagon wrench 5 mm (JIS standard) for tightening. A cross hole is attached to the joint penetration part for easy positioning during assembly. Joint that attaches two pipes in parallel
- TMEH JAPAN GA-90S set productIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 205
- SPACIO Pipe stand S JB-202It is used as a stand when erecting a pipe.Material Steel (trivalent chromate treatment) Mass (g) 295
- TMEH JAPAN GA-7S set productIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 228
- SPACIO Caster for pipe system, adjustable type (with stopper)Specification Swivel caster S Shape Swivel caster S Material (Main Unit) Steel Material (Wheel) Elastomer
- TAKIGEN MFG Pipe capΦ48.6 Pipe cap Made of metal, it has excellent weather resistance and corrosion resistance. It can be easily installed just by pushing it in. This product is a metal cap. When installing, push it in by hand or tap the top edge lightly with a plastic hammer to install it. If you hit it with a hard... Read MoreTAKIGEN code 24535
- TMEH JAPAN GA-66 set productIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Suitable for Pipe with an outer diameter of Φ28 mm Mass (g) 68
- TMEH JAPAN GA-104 set productIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 150
- No Brand Zinc ring (corrosion-resistant zinc ring)It is a must-have item for marine boats and fishing boats. Since it is a two-piece type, it can be installed without removing the propeller. For marine boats, yachts, cruisers, fishing boats, etc.Material Zinc
- IMAO NDQ Square pipe jointIt is a RoHS directive compliant product.Allowable Load (N) 5000
- SPACIO Caster for pipe system, universalSpecification Swivel caster Shape Swivel caster Material (Main Unit) Steel Material (Wheel) Elastomer Stopper None Caster Type Plug-in caster
- Miyoshi Kikai (former Miyoshi Pijon) Marunouchi cap (SUS304)Material Stainless steel (SUS304)
- Miyoshi Kikai (former Miyoshi Pijon) Square pipe (no scale)It does not rotate and can be easily positioned and reproduced. A frame material that requires linear movement of equipment and secure fixing. The outer diameter tolerance is manufactured according to the inner diameter tolerance of the pijon (clamp). The outer shape of the pipe has a negative to... Read More
- NBK (Nabeya Bi-tech Kaisha) Cross clamperA clamper that connects two shafts to a cross. Clamping type. Easy to install and remove the shaft. Moreover, it does not damage the shaft. Convenient for adjusting side guides and sensors on the transport line. Made of lightweight aluminum, it can be used for both round and square shafts.Included Accessories Hexagon socket head cap screw Material (Main Unit) Aluminum (A6063) Material (Screw) SUS304 Finish Body: Barrel polishingfrom S$26.99Min. 2 days
- TMEH JAPAN GA-4S Set ProductIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 232
- TMEH JAPAN GA-3S set productIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 310
- TMEH JAPAN rubber footThese are the parts used for the legs.Mass (g) 10
- TMEH JAPAN Plastic jointLightweight plastic joint. It is used by adhering it to the pipe with a special adhesive.Material ABS resin
- TMEH JAPAN Metal bushingThese are the parts used for the legs.Material Iron Mass (g) 90
- SPACIO Plastic joint cap (outer cap)Suitable Pipe Standard pipe for Spacia pipe systemfrom S$0.62Min. 2 days
- TAKIGEN MFG Swivel caster for low floor weight (with stopper)A heavy load caster with a low mounting height and a high allowable load. OA equipment, large and medium-sized equipment, trolleys, wagonsShape With free wheel stopper Material (Main Unit) Hot rolled steel plate (SPHC) Surface finish Zinc plating chromate treatment (MFZn-C)
- TMEH JAPAN Joint B & N setBolts and nuts for assembling metal joints.Mass (g) 10from S$0.74Min. 2 days
- Miyoshi Kikai (former Miyoshi Pijon) Round pipe without scaleIt can be slid and turned freely and can be used flexibly. A frame material that allows you to freely attach equipment and position the display. The outer diameter tolerance is manufactured according to the inner diameter tolerance of the pijon (clamp). The outer diameter of the pipe has a negati... Read More
- SPACIO Pinch-type pipe standA pipe stand that allows you to easily attach a Spacia pipe to a ready-made work table top plate. It is a sandwich type and does not require any special processing. For users who want to retrofit the off-the-shelf work table with a pipe system.Material Steel (baked paint) Mass (g) 677
- TMEH JAPAN GA-8S set productIt is an assembly type pipe fixing bracket. It can be easily fixed by simply tightening the bolts and nuts with a hexagon wrench.Mass (g) 112from S$6.99Min. 2 days
- SPACIO Insert nut Φ24M12 JB-406M12Mass (g) 96.2 Suitable Pipe Standard pipe for Spacia pipe system
- SUS GF handy cutterA handy cutter for green frames. * Available frame items: GFF-000Mass (g) 605
Filter by categories