Other Grease Fittings
Other Related Pages
KURITA KURITA Grease Nipple AdapterConversion joint from another diameter to Rc1 / 8. It is used when piping the hydraulic hose by removing the grease nipple in a place where it is difficult to refuel.Material (Main Unit) Made of brass Surface Treatment Nickel plating Suitable Fluid Air / Grease Fluid Temperature (℃) -5～60- TRUSCO Different diameter nippleA fitting that converts M6 screws and unified screws 1/4 to Rc 1/8. Ideal for removing grease nipples that are difficult to refuel and attaching hydraulic hoses.Material (Main Unit) Brass bar Surface Treatment Nickel plating
- AZ AZ grease nipple cap BPNipple cap For dust and dirt protection of grease nipples
- No Brand Grease nipple pin type (with brass plating)Nipple for grease injection Attach it to a machine tool, etc., and inject grease with a grease pump, etc.Specification With brass plating Type Pin type
- KURITA KURITA button headA button-type nipple that uses a micro hose to refuel a grease gun. For grease lubrication work.Material (Main Unit) Made of brass Type Button head Surface Treatment Nickel plating Material Steel ball / hard steel wire
- ESCO Resin cap (for grease nipple / 20 pcs)Dustproof / grease leak cap for grease nipples (round head).Material Polyethylenefrom S$7.19Min. 2 days
- KURITA KURITA Pin TypeA nipple with a handle that uses a micro hose to refuel the grease gun. For grease lubrication work.Material (Main Unit) Made of brass Type Pin type Surface Treatment Nickel plating Material Steel ball / hard steel wire
- ESCO M6-M10 Grease nipple setA set of 150 M6, M8 and M10 nipples.Material Alloy steelfrom S$99.90Min. 2 days
- ESCO M6-M8 Grease nipple setA set of 30 M6 and M8 nipples.Material Steel (galvanized)from S$59.99Min. 2 days
- THK Grease nippleA grease nipple used to lubricate linear motion systems.Thread Size -
- ESCO M6-M10 Grease nipple set110 nipple set for M6, M8 and M10.Material Alloy steelfrom S$86.99Min. 2 days
- AZ AZ brass grease nipple BPIt is a hydraulic nipple. Brass type. For replacement when grease nipple wear
- KURITA KURITA Stainless steel grease nipple adapterConversion joint from another diameter to Rc1 / 8. It is used when piping the hydraulic hose by removing the grease nipple in a place where it is difficult to refuel.Material (Main Unit) SUS303 Suitable Fluid Air / Greasefrom S$16.99Min. 2 days
- ESCO Dust-proof rubber cap (for pin type grease nipple / 10 pieces)Dustproof rubber cap. For EA991CY-11, -12, -31, -32, -36, -37Material Nitrile rubber
- ESCO R 1/8 "x12.5mm relief nippleAllows pressure from oil and grease to escape.Material Brass bar (nickel plating) Thread Size R1/8”from S$3.59Min. 2 days
- ESCO R1 / 8 "-M6x0.75 Adapter (for grease nipple)A special fitting that converts a metric screw into a taper screw for pipes. It can be connected to a hydraulic hose, etc. to enable grease up from a place where refueling is easy.Material Brass bar (nickel plating) Screw size (Male) M6 × 0.75 (Female) Rc1 / 8 ”from S$4.99Min. 2 days
- KURITA KURITA Stainless steel pin typeA nipple with a handle that uses a micro hose to refuel the grease gun. For grease lubrication work.Material (Main Unit) SUS303 Type Pin typefrom S$12.99Min. 2 days
- ESCO UNF1 / 4 "-UNF5 / 16" -G 1/8 "Grease nipple setA set of 140 nipples of UNF1 / 4 ”, UNF5 / 16” and G (PF) 1/8 ”.Material Alloy steelfrom S$88.99Min. 2 days
- ESCO M10 (male) xG1 / 8 "(female) nippleMaterial Steel (galvanized) Mass (g) 12 Inner Diameter (Φmm) [Male side] 5 Screw size M10P1.0 (male) x G (PF) 1/8 ”(female)
- ESCO UNF1 / 4 "-G 1/8" Grease nipple setA set of 110 nipples for UNF1 / 4 "and G (PF) 1/8".Material Alloy steelfrom S$76.99Min. 2 days
- No Brand Button head (with brass plating)Specification With brass plating Type Button head
- ESCO G1 / 8 "(male) X M10 (Female) NippleMaterial Steel (galvanized) Mass (g) 12 Inner Diameter (Φmm) [Male side] 5 Screw size G (PF) 1/8 ”(male) x M10P1.0 (female)from S$5.19Min. 2 days
- No Brand Button head (brass fabric)Specification Brass fabric Type Button headfrom S$3.29Min. 6 days
- No Brand Grease nipple pin type (SUS303)Nipple for grease injection Attach it to a machine tool, etc., and inject grease with a grease pump, etc.Material SUS303 Type Pin typefrom S$22.99Min. 6 days
- ESCO Rc1 / 8 "xM6-1.0 Adapter (for grease nipple)A special fitting that converts a metric thread into a taper thread for pipes. By connecting to a hydraulic hose, etc., it is possible to grease up from a place where it is easy to refuel.Material Stainless steel Screw size [Female] Rc1 / 8 ", [Male] M6 x 1.0from S$18.99Min. 3 days
-
- ESCO R 1/4 "x17.5mm relief nippleAllows pressure from oil and grease to escape.Material Brass bar (nickel plating) Thread Size R1/4”from S$6.19Min. 2 days
- ESCO R1/8"-M6x1.0 Adapter (For Grease Nipple)A special fitting that converts a metric screw into a taper screw for pipes. It can be connected to a hydraulic hose, etc. to enable grease up from a place where refueling is easy.Material Brass bar (nickel plating) Screw size (Male) M6 × 1.0 (Female) Rc1 / 8 ”from S$4.99Min. 3 days
- KURITA KURITA Stainless Button HeadA button-type nipple that uses a micro hose to refuel a grease gun. For grease lubrication work.Material (Main Unit) SUS303 Type Button headfrom S$18.99Min. 5 days
- ESCO UNF1 / 4 "-PTF1 / 8" Grease nipple setUNF (SAE-LT) 1/4 ”-28, 1/8” PTF nipple set of 100 pieces.Included Accessories Tap & Nipple Detachment Wrench Material Steel (galvanized)from S$199.90Min. 3 days
- ESCO R1 / 8 "-UNF1 / 4" adapter (for grease nipple)A special fitting that converts a metric screw into a taper screw for pipes. It can be connected to a hydraulic hose, etc. to enable grease up from a place where refueling is easy.Material Brass bar (nickel plating) Screw size (Male) UNF1 / 4 ”(Female) Rc1 / 8”from S$4.99Min. 3 days
- ESCO R 1/8 "grease nipple (pin type / stainless steel)Material Body: SUS303, Ball: SUS304 / Spring Screw size R1/8”from S$12.99Min. 3 days
- IKO (NIPPON THOMPSON) Super Flexible Nozzle Press Fitting Type(with Nozzle)Ball diameter (inch) 7/16from S$8.19Min. 5 days
- ESCO M6-M10 Grease nipple setA set of 100 M6, M8 and M10 nipples.Included Accessories Tap & Nipple Detachment Wrench Material Steel (galvanized)from S$239.90Min. 3 days
- ESCO Rc1 / 8 "xUNF1 / 4" adapter (for grease nipple)A special fitting that converts a metric thread into a taper thread for pipes. By connecting to a hydraulic hose, etc., it is possible to grease up from a place where it is easy to refuel.Material Stainless steelfrom S$18.99Min. 3 days
- IKO (NIPPON THOMPSON) Super Flexible Nozzle Press Fitting Type(without Nozzle)Ball diameter (inch) 7/16from S$6.99Min. 4 days
-
- AZ AZ brass grease nippleIt is a hydraulic nipple. Brass type For replacement when grease nipple wear
- ESCO G 1/4 "grease nipple (pin type / stainless steel)Material Body: SUS303, Ball: SUS304 / Spring Screw size G1/4”from S$24.99Min. 3 days
- ESCO R1 / 8 "Grease nipple (button head / stainless steel)Material Body: SUS303, Ball: SUS304 / Spring Diameter (Φmm) [Button] 15 Screw size R1/8”from S$21.99Min. 3 days
