All Category

Grease Fittings / Oil Sight Glasses

The grease nipple of the grease nipple cup is a part for injecting grease, and serves as a receiving port for grease sent from pumps. It is classified into A type, B type and C type according to the mounting direction of the mouth connecting the tubes. It is characterized by being made of metal so that it has excellent oil resistance. Lubricators other than grease nipples are also classified in this category. The grease cup is a lubricator consisting of a main body and a lid, and is a larger part than a grease nipple. Although it is not suitable for replenishing grease with a pump, many grease can be replenished at once.
View : Grid List
Filter

Items 1 - 40 of 411

Set Ascending Direction
  1. Oil Level Gauge "OIL POT MADO" (Drive Type)
    Koho Kosan Oil Level Gauge "OIL POT MADO" (Drive Type)
    The transparent body is made of ultra-hard special synthetic resin, so it will not be damaged by any impact. The reflector is white, and you can clearly see the red letters and lines of "H" and "L" even in a slightly dark place. Since the reflector has the property of repellin... Read More
    Heat Resistance Temperature (℃)  100  Trusco Part No.  102-8511  Dimension D (mm)  12  Dimension F (mm)  16  Dimension E (mm)  Mounting Hole Diameter (Φmm)  20.5±0.2  Dimension A (mm)  21  Dimension B (mm)  22  Mass (g)  Dimension G (mm)  Dimension C (mm)  Type  HL type  Shape  Round type 
    Rating:
    100%
    from S$5.99
    Min. 2 days
  2. Oil Pressure Gauge with Metal Thread KIM-AR Type
    Kyowa Oil Pressure Gauge with Metal Thread KIM-AR Type
    Has excellent pressure resistance, heat resistance, and chemical resistance. It is compact and easy to install. For checking the amount of hydraulic oil, etc.
    Shape  Round type 
    Rating:
    90%
    from S$24.99
    Min. 2 days
  3. Line Type Oil Level Sight Glass
    IMAO Line Type Oil Level Sight Glass
    Fitting installation
    Heat Resistance Temperature (℃)  100  Material (level board)  Aluminum (A1050P)  Material (O-ring)  Nitrile rubber (NBR)  Shape  Round type 
    from S$6.49
    Min. 2 days
  4. Valve cap
    IMAO Valve cap
    When the tank reaches a certain air pressure, the valve opens automatically to expel high-pressure air. Does not take in outside air. Exhaust cap Please use for speed reducer distributors, compressors, etc. that require the discharge of compressed air. * Avoid using it in a water tank as the resi... Read More
    Operating Temperature Range (℃)  -30~120  Heat Resistance Temperature (℃)  120  Type  Screw-in type 
    from S$11.99
    Min. 2 days
  5. Grease Nipple A Type (with Brass Plating)
    No Brand Grease Nipple A Type (with Brass Plating)
    Nipple for grease injection Angle: Straight Attached to machine tools, bearings, etc. Inject grease with a grease pump etc.
    Type  Type A  Specification  With brass plating 
    Rating:
    85%
    from S$1.19
    Min. 2 days
  6. Grease Nipple B Type (With Brass Plated)
    No Brand Grease Nipple B Type (With Brass Plated)
    Nipple for grease injection. Angle: 67.5 ° It is attached to machine tools, bearings, etc., and grease is injected with a grease pump.
    Type  Type B  Specification  With brass plating 
    Rating:
    85%
    from S$2.49
    Min. 2 days
  7. KURITA Grease Nipple A Type Head
    KURITA KURITA Grease Nipple A Type Head
    Brass grease nipple. A type straight type. For grease filler port.
    Material (Main Unit)  Made of brass  Surface Treatment  Nickel plating  Material  Steel ball / hard steel wire  Type  Type A (straight) 
    Rating:
    100%
    from S$7.39
    Min. 2 days
  8. Grease nipple A type (brass fabric)
    No Brand Grease nipple A type (brass fabric)
    Nipple for grease injection It is attached to machine tools, bearings, etc., and grease is injected with a grease pump, etc.
    Type  A type popular products  Specification  Brass fabric 
    Rating:
    96%
    from S$1.09
    Min. 2 days
  9. Grease Nipple C Type (with Brass Plating)
    No Brand Grease Nipple C Type (with Brass Plating)
    Nipple for grease injection Angle: 90 ° Attached to machine tools, bearings, etc. Inject grease with a grease pump etc.
    Type  C type  Specification  With brass plating 
    Rating:
    100%
    from S$2.49
    Min. 2 days
  10. Grease nipple A type
    TRUSCO Grease nipple A type
    Lubricate by pressing the nozzle of the grease gun against the tip of the grease nipple. The recommended lubrication pressure is 10MPa or less.
    Material (Main Unit)  Brass bar  Surface Treatment  Nickel plating 
    Rating:
    100%
    from S$5.29
    Min. 2 days
  11. Round Thread Type Oil Pressure Gauge
    Kyowa Round Thread Type Oil Pressure Gauge
    A standard type of resin screw-in type oil gauge. RoHS compliant product. * Never use the main body as it is vulnerable to organic solvents such as washing oil and thinner and may cause cloudiness and cracks. Also, be careful not to touch these atmospheres for a long time, especially when handlin... Read More
    Heat Resistance Temperature (℃)  100  Material  Polycarbonate (PC)  Shape  Round type 
    Rating:
    79%
    from S$4.99
    Min. 2 days
  12. KURITA Grease Nipple Adapter
    KURITA KURITA Grease Nipple Adapter
    Conversion joint from another diameter to Rc1 / 8. It is used when piping the hydraulic hose by removing the grease nipple in a place where it is difficult to refuel.
    Fluid Temperature (℃)  -5~60  Width Across Flats (mm)  12  Overall Length (mm)  20  Suitable Fluid  Air / Grease  Material (Main Unit)  Made of brass  Screw Length (mm)  Male / 5, Female 11  Surface Treatment  Nickel plating 
    Rating:
    90%
    from S$4.19
    Min. 2 days
  13. Oil stopper (screwed type)
    Koho Kosan Oil stopper (screwed type)
    Use for high speed machines with heavy oil foaming. As it is a screw type, it is very easy to install and remove.
    Tightening Torque  10kgfcm  Type  Standard (with holes and seals) 
    Rating:
    91%
    from S$2.79
    Min. 2 days
  14. KURITA Grease Nipple Type B Standard Head
    KURITA KURITA Grease Nipple Type B Standard Head
    Brass grease nipple. B type 67.5 ° type. For grease filler port.
    Material (Main Unit)  Made of brass  Surface Treatment  Nickel plating  Material  Steel ball / hard steel wire  Type  Type B (67.5 °) 
    Rating:
    95%
    from S$13.99
    Min. 2 days
  15. Oil Level Gauge Outer Diameter Non-Flange Type
    Musashi Oil Seal Mfg Oil Level Gauge Outer Diameter Non-Flange Type
    The oil level gauge (oil level gauge) can accurately check the position of the oil level or liquid level in the oil tank or gear box. It has characteristics such as heat resistance, pressure resistance, and sealing properties as well as oil resistance, and is used in a wide range of applications ... Read More
    Pressure Resistance (kg/cm2 1.5(max.)  Heat Resistance Temperature (℃)  110  Maximum Resistant Temperature (℃)  110  RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Outer diameter brim type  Shape  Round type  Material  Sight glass/polycarbonate resin 
    Rating:
    95%
    from S$4.99
    Min. 2 days
  16. Oil cap KRM-A type
    Kyowa Oil cap KRM-A type
    Even if there is a lot of oil splashing in the gear tank or crank chamber of a machine tool, it is difficult for it to leak from the air holes.
    Heat Resistance Temperature (℃)  100 
    Rating:
    80%
    from S$3.99
    Min. 2 days
  17. Grease nipple B type
    AZ Grease nipple B type
    Material  Brass  Type  Type B  Specification  With cap 
    Rating:
    93%
    from S$4.69
    Min. 2 days
  18. Oil Level Sight Glass "OILPOT MADO" O Type (Screw Type)
    Koho Kosan Oil Level Sight Glass "OILPOT MADO" O Type (Screw Type)
    Since the transparent body is an ultra-hard special synthetic resin, it will not be damaged by any impact. The reflector is white and does not get dirty because it repels oil. The reflector is white and the oil amount display is clearly visible even in a slightly dark place. * Do not use washing ... Read More
    Thickness C (mm)  11 (excluding screw)  Dimension L (mm)  29  Dimension J (mm)  Dimension K (mm)  Shape  Long form  Specification  Standard 
    Rating:
    87%
    from S$33.99
    Min. 2 days
  19. AZ brass grease nipple BP for brush cutter
    AZ AZ brass grease nipple BP for brush cutter
    It is a hydraulic nipple. Brass type. For replacing grease nipples on brush cutters. For replacement when grease nipple wear
    Thread Standard  8×P1.25BP 
    Rating:
    97%
    from S$6.79
    Min. 2 days
  20. Oil Level Gauge Outer Diameter Flange Type
    Musashi Oil Seal Mfg Oil Level Gauge Outer Diameter Flange Type
    The oil level gauge (oil level gauge) can accurately check the position of the oil level or liquid level in the oil tank or gear box. It has characteristics such as heat resistance, pressure resistance, and sealing properties as well as oil resistance, and is used in a wide range of applications ... Read More
    Pressure Resistance (kg/cm2 1.5(max.)  Heat Resistance Temperature (℃)  110  Maximum Resistant Temperature (℃)  110  RoHS directive (corresponding to 10 substances)  Correspondence  Specification  Outer diameter flange type  Shape  Round type  Material  Sight glass/polycarbonate resin 
    Rating:
    93%
    from S$4.49
    Min. 2 days
  21. Different diameter nipple
    TRUSCO Different diameter nipple
    A fitting that converts M6 screws and unified screws 1/4 to Rc 1/8. Ideal for removing grease nipples that are difficult to refuel and attaching hydraulic hoses.
    Material (Main Unit)  Brass bar  Surface Treatment  Nickel plating 
    Rating:
    80%
    from S$15.99
    Min. 2 days
  22. Oil Level Gauge (Drive Type)
    Koho Kosan Oil Level Gauge (Drive Type)
    The transparent body is made of ultra-hard special synthetic resin, so it will not be damaged by any impact. The reflector is white, and the Hinomaru display is clearly visible even in a slightly dark place. Since the reflector has the property of repelling oil, there is no need to worry about it... Read More
    Heat Resistance Temperature (℃)  100  Dimension E (mm)  Dimension C (mm)  Type  Hinomaru  Shape  Round type 
    Rating:
    80%
    from S$6.19
    Min. 2 days
  23. Grease Nipple A Type
    AZ Grease Nipple A Type
    Material  Brass  Type  Type A  Specification  With cap 
    Rating:
    92%
    from S$3.09
    Min. 2 days
  24. AZ grease nipple cap BP
    AZ AZ grease nipple cap BP
    Nipple cap For dust and dirt protection of grease nipples
    Rating:
    93%
    from S$3.39
    Min. 2 days
  25. Round Type Oil Pressure Gauge
    Kyowa Round Type Oil Pressure Gauge
    Since the reflector is white, you can check the presence or absence of oil from a distance, and you can clearly see the vermilion dots.
    Heat Resistance Temperature (℃)  90  Shape  Round type 
    Rating:
    100%
    from S$4.69
    Min. 2 days
  26. KURITA Grease Nipple A Type JIS Type
    KURITA KURITA Grease Nipple A Type JIS Type
    Brass grease nipple. A type straight type. For grease filler port.
    Material (Main Unit)  Made of brass  Surface Treatment  Nickel plating  Material  Steel ball / hard steel wire  Type  Type A (straight) 
    Rating:
    60%
    from S$9.69
    Min. 2 days
  27. KURITA Grease Nipple C Type Standard Head
    KURITA KURITA Grease Nipple C Type Standard Head
    Brass grease nipple. C type 90 ° type. For grease filler port.
    Type  C type (90 °)  Material (Main Unit)  Made of brass  Surface Treatment  Nickel plating  Material  Steel ball / hard steel wire 
    Rating:
    100%
    from S$12.99
    Min. 2 days
  28. Oil Level Gauge V Type (Drive Type)
    Koho Kosan Oil Level Gauge V Type (Drive Type)
    The transparent cover part of the main body is made of polycarbonate, which has excellent impact resistance and is not easily damaged. The white reflector provides excellent visibility in combination with red letters, lines and marks. In addition, because it is made of an oil-resistant material, ... Read More
    Rating:
    100%
    from S$4.19
    Min. 2 days
  29. Grease nipple B type (brass fabric)
    No Brand Grease nipple B type (brass fabric)
    Nipple for grease injection
    Specification  Brass fabric  Type  Type B 
    Rating:
    100%
    from S$2.99
    Min. 2 days
  30. KURITA Stainless grease nipple A type JIS type
    KURITA KURITA Stainless grease nipple A type JIS type
    Stainless steel grease nipple. A type straight type. For grease filler port.
    Material (Main Unit)  SUS303  Type  Type A (straight) 
    Rating:
    80%
    from S$4.49
    Min. 2 days
  31. Grease nipple B type
    TRUSCO Grease nipple B type
    Lubricate by pressing the nozzle of the grease gun against the tip of the grease nipple. The recommended lubrication pressure is 10MPa or less.
    from S$8.89
    Min. 2 days
  32. Oil cup (with plating)
    No Brand Oil cup (with plating)
    An oil cup for injecting grease For injecting oil for hydraulic equipment, etc.
    Specification  With plating 
    Rating:
    87%
    from S$12.99
    Min. 2 days
  33. Oil stopper (push-in type)
    Koho Kosan Oil stopper (push-in type)
    Type  Standard (with holes) 
    Rating:
    97%
    from S$3.39
    Min. 2 days
  34. Breather cap
    IMAO Breather cap
    Since it has a ventilation structure, air can freely enter and exit even with the cap attached. It is safe because even if a large pressure difference temporarily occurs in the tank due to a sudden temperature rise or oil backlash, it will immediately regain equilibrium with the outside air. Idea... Read More
    Dimension D1 (mm) 
    Rating:
    100%
    from S$9.29
    Min. 2 days
  35. Grease nipple pin type (with brass plating)
    No Brand Grease nipple pin type (with brass plating)
    Nipple for grease injection Attach it to a machine tool, etc., and inject grease with a grease pump, etc.
    Type  Pin type  Specification  With brass plating 
    Rating:
    60%
    from S$2.69
    Min. 2 days
  36. Tamaki oil cup
    No Brand Tamaki oil cup
    An oil cup for injecting grease For injecting oil for hydraulic equipment, etc.
    Rating:
    83%
    from S$2.19
    Min. 2 days
  37. Oil plug
    IMAO Oil plug
    It is a RoHS directive compliant product. * Avoid using it in a water tank as the resin absorbs water and expands. Gasoline and alcohol cannot be used.
    Operating Temperature Range (℃)  -30~130  Material (Seal)  Nitrile rubber (NBR)  Material (Main Unit)  Polyamide (glass fiber reinforced) 
    Rating:
    84%
    from S$2.49
    Min. 2 days
  38. Long Type Standard Oil Pressure Gauge
    Kyowa Long Type Standard Oil Pressure Gauge
    Special synthetic resin is used for the mounting bolts and set parts, and transparent resin with strong impact resistance and little load deformation is used for the oil window parts.
    Heat Resistance Temperature (℃)  100  Shape  Long form  Material  Polycarbonate (PC) / Polyamide (PA) 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  39. M Type Oil Pressure Gauge
    Iehara Light Kogyo M Type Oil Pressure Gauge
    Ideal for heat resistance with wide oil level range and maximum visibility without worrying about damage * Please install the oil gauge after painting. * When cleaning transparent parts, never use thinner or other volatile or organic solvents as they may cause cloudiness and cracks. * When mounti... Read More
    Withstand Pressure (MPa)  1.5(40℃)  Heat Resistance Temperature (℃)  130(MAX)  Shape  Round type 
    Rating:
    75%
    from S$18.99
    Min. 2 days
  40. Grease cup (brass)
    No Brand Grease cup (brass)
    A cup for injecting grease For injecting oil for hydraulic equipment, etc.
    Rating:
    89%
    from S$9.59
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 411

Set Ascending Direction