All Category

Door Catches

View : Grid List
Filter

Items 1 - 40 of 215

Set Ascending Direction
  1. magnet catch
    Shibutani magnet catch
    It is an imposition type. You can adjust the protruding size of the magnet. Machine etc.
    Magnetic Attraction Force (N [kgf])  About 29.4 (3)  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1.99
    Min. 6 days
  2. Magnet Catch (Corrosion-Resistant)
    TOCHIGIYA Magnet Catch (Corrosion-Resistant)
    Since stainless steel is used for the yoke and keeper, it is less likely to rust than conventional products.
    Mass (g)  14.4  Magnetic Attraction Force (N [kgf])  About 24.5 (2.5)  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    89%
    from S$2.99
    Min. 2 days
  3. Thin Magnet Catch (with Keeper)
    TOCHIGIYA Thin Magnet Catch (with Keeper)
    A thin and powerful magnet catch that uses neodymium magnets. Measuring equipment, OA equipment, furniture, home appliances, etc. * For mounting, use M3 flat head machine screws or flat rivets, and make a Φ5.0 flat hole on the mounting panel side. * Magnets are vulnerable to impacts due to their ... Read More
    Mass (g)  7.6  Operating Temperature Range (℃)  0~+60  Magnetic Attraction Force (N [kgf])  About 26.5 [2.7]  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$2.49
    Min. 2 days
  4. Door limit switch
    TAKIGEN MFG Door limit switch
    The magnet turns the reed switch ON/OFF. (ON when approaching) Door open / close detection *Please note that if the switch part is subjected to a large impact (such as being dropped from a height of 80 cm or more), it may malfunction. *Avoid using this product because it uses non-crystalline resi... Read More
    Material  ABS resin  Standard Color  Gray  TAKIGEN code  50084 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  5. magnet catch
    TRUSCO magnet catch
    A magnet catch with a simple structure and high versatility.
    Material (Main Unit)  Polypropylene (PP)  Mass (g)  23  Attracting Force (N)  35  Material (Strike)  Steel 
    Rating:
    92%
    from S$1.09
    Min. 2 days
  6. Strong Magnet Catch
    Geo. Prince Takeshita Strong Magnet Catch
    A powerful magnet catch with a mounting surface that can be selected in two directions. Distribution board, distribution board, machine tool
    Mounting Screw  Receiving: M4 flat head screw head  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$5.39
    Min. 2 days
  7. Ball Catch
    TAKIGEN MFG Ball Catch
    Ideal for high temperature and high humidity. It can be inserted and removed smoothly. Small distribution board / measuring machine / machine tool
    Material  Zinc alloy (ZDC)  Surface finish  Chrome plating (MZCr) 
    Rating:
    100%
    from S$4.79
    Min. 2 days
  8. Super magnet catch (horizontal)
    TAKIGEN MFG Super magnet catch (horizontal)
    Built-in cushioning spring Distribution board / machine tool
    Material  Magnet: Ba-ferrite (anisotropic)  Material (Case)  Aluminum alloy plate (A1050P)  Material (Strike)  Steel Plate Cold Commercial (SPCC) 
    Rating:
    40%
    from S$2.59
    Min. 2 days
  9. Super magnet catch (vertical)
    TAKIGEN MFG Super magnet catch (vertical)
    There are two types, large and small, so you can choose according to your needs. Distribution board / machine tool
    Material (Case)  Brass plate (C2680P) 
    Rating:
    92%
    from S$2.79
    Min. 2 days
  10. Magnet Catch
    TOCHIGIYA Magnet Catch
    Distribution boards, distribution boards, machine tools, measuring equipment, OA equipment, office equipment, furniture, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    97%
    from S$1.99
    Min. 2 days
  11. Magnet Catch
    TOCHIGIYA Magnet Catch
    A magnet catch that uses silicone rubber for the case. Since there is no metal-to-metal contact with the keeper, etc., contact noise is reduced. Kitchen equipment, OA equipment, furniture, etc. * For mounting, use M4 truss machine screws and fix with a tightening torque of 0.39 N ・ m (4 kgf ・ c... Read More
    Operating Temperature Range (℃)  0~+80  Magnetic Attraction Force (N [kgf])  About 34.3 [3.5]  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    97%
    from S$5.89
    Min. 2 days
  12. Strong magnet catch
    TAKIGEN MFG Strong magnet catch
    It is designed so that the mounting surface can be selected in two directions. Distribution board / machine tool
    Material (Case)  Zinc alloy (ZDC) 
    Rating:
    100%
    from S$6.49
    Min. 2 days
  13. Magnet catch Aluminum / Horizontal
    TRUSCO Magnet catch Aluminum / Horizontal
    The mounting holes are long holes and can be adjusted after mounting.
    Color  Silver  Material (Main Unit)  Aluminum  Mass (g)  18  Material (Strike)  Steel 
    Rating:
    80%
    from S$2.99
    Min. 2 days
  14. Push Catch
    TOCHIGIYA Push Catch
    If the door is caught by the attractive force of the magnet, it may come off due to vibration, but this product catches it completely by sandwiching the keeper. When the lock is released, the door is pushed out, so the door can be opened without using knobs or handles.
    Mass (g)  17.1  Holding Force N (kgf)  About 9.81 (1)  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$4.49
    Min. 2 days
  15. Round One-Touch Open Catch
    TAKIGEN MFG Round One-Touch Open Catch
    It is small and does not take up space. No need for a handle on the door. For furniture, cabinets and lightweight doors * Please avoid using this product as it uses a non-crystalline resin material and is not compatible with anti-loosening agents.
    Case Color  Black  Material (Case)  ABS resin  Material (Slider)  Polyacetal (POM)  Surface finish  Receptacle: Zinc plating (plate) 
    Rating:
    89%
    from S$3.29
    Min. 2 days
  16. magnet catch
    TAKIGEN MFG magnet catch
    Rating:
    100%
    from S$1.09
    Min. 2 days
  17. Neody catch
    Geo. Prince Takeshita Neody catch
    It is a small simple magnet catch. Various cabinets general purpose * Mounting screws are not included. Please prepare separately. (Recommended screw for bracket: M3 countersunk head machine screw)
    Set Contents  Body x 1, receiver x 1  Mass (g)  Finish  Nickel plating finish  Magnetic Attraction Force (N [kgf])  20[2]  Recommended Screw  M3 countersunk machine screw  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    90%
    from S$7.69
    Min. 2 days
  18. Magnetic Catch with Switch
    TAKIGEN MFG Magnetic Catch with Switch
    It has both functions of door catch and power switch. Detects the opening and closing of the door. Cabinet with built-in electrical equipment
    Material  ABS resin  Mechanical Life  500,000 times or more  Magnet  Anisotropic magnet  Insulation Resistance  100MΩ or more  Electrical Life  50,000 times or more 
    Rating:
    100%
    from S$18.99
    Min. 2 days
  19. One-touch catch
    TAKIGEN MFG One-touch catch
    Lightly press the door to close it, and press it again to open the door by the action of the spring. Since it does not use magnets, it is ideal for places where magnetism is disliked. Measuring equipment / distribution board / cabinet
    Color  Black  Holding Power  20N  TAKIGEN code  24693 
    Rating:
    100%
    from S$1.09
    Min. 2 days
  20. Magnet catch (round type, one-touch open catch type)
    Shibutani Magnet catch (round type, one-touch open catch type)
    A type in which the magnet protrudes when pushed in. Machine etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$2.49
    Min. 2 days
  21. Stainless Box Roller Catch
    TOCHIGIYA Stainless Box Roller Catch
    Since the contact part is a roller, insertion and removal is smooth. Measuring equipment, machine tools, furniture, etc. * When installing the keeper, the screws used are M3, For the head shape, use a pan, truss, or bind. Also, avoid using washers, etc.
    Specification  Pull-out force N (kgf) /Approx.19.6 (2)  Mass (g)  13.2  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$5.69
    Min. 2 days
  22. Magnet catch Nylon / Horizontal
    TRUSCO Magnet catch Nylon / Horizontal
    The suction surface can be finely adjusted back and forth. It also has excellent impact resistance.
    Material (Main Unit)  Resin (PA)  Mass (g)  14  Attracting Force (N)  30  Material (Strike)  Steel 
    Rating:
    90%
    from S$2.39
    Min. 2 days
  23. Hard Catch
    TOCHIGIYA Hard Catch
    High load fastener made of stainless steel. Measuring equipment, machine tools, construction machinery, medical equipment, food machinery, etc. * Since the arm does not have much elasticity, please use it together with cushioning material such as packing. When installing, chamfer the other side.
    Mass (g)  88  Allowable load (N [kgf])  687(70)  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$21.99
    Min. 2 days
  24. Magnet Catch PP Resin
    TRUSCO Magnet Catch PP Resin
    A magnet catch (10P type) with a simple structure and high versatility.
    Material (Main Unit)  Polypropylene (PP)  Mass (g)  12  Attracting Force (N)  20  Material (Strike)  Steel  Recommended Screw  (For backing plate) 2.4mm 
    Rating:
    88%
    from S$0.79
    Min. 2 days
  25. Roller catch
    Geo. Prince Takeshita Roller catch
    Various cabinets general purpose
    Material  Steel Plate Cold Commercial (SPCC)  Finish  Zinc plating chromate treatment 
    Rating:
    67%
    from S$0.97
    Min. 2 days
  26. Stainless ball catch
    TAKIGEN MFG Stainless ball catch
    Made of stainless steel and has excellent corrosion resistance. Ideal for high temperature and high humidity. It can be inserted and removed smoothly. Environmental equipment, communication equipment, ships, vehicles
    Material  Stainless steel (SUS316)  Surface finish  Electrolytic polishing 
    Rating:
    100%
    from S$32.99
    Min. 2 days
  27. Stainless roller catch
    TAKIGEN MFG Stainless roller catch
    Made of stainless steel and has excellent corrosion resistance. Since the roller part is polyethylene, it is easy to insert and remove. Kitchen doors / furniture
    Surface finish  Body / mirror buffing 
    Rating:
    60%
    from S$1.49
    Min. 2 days
  28. Round magnet catch
    TOCHIGIYA Round magnet catch
    An embedded magnet catch that can make effective use of space. Measuring equipment, OA equipment, furniture, etc. * Magnets are vulnerable to impacts due to their characteristics, so use them so that they do not come into contact with each other. The magnet may crack and the suction force may dec... Read More
    Material  SPCC, ferrite  Parts Name  Yoke, magnet  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1.39
    Min. 2 days
  29. Stainless Ball Catch
    TOCHIGIYA Stainless Ball Catch
    It is designed to be inserted and removed from two directions. Measuring equipment, machine tools, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$38.99
    Min. 2 days
  30. magnet catch
    TAKIGEN MFG magnet catch
    Both front and back sides can be adsorbed. The mounting hole is a long hole and can be adjusted after mounting. There are two sizes, large and small, and you can choose according to your needs. Distribution board, measuring equipment, wooden furniture
    Case Color  Ivory  Material (Case)  Polyethylene (PE) 
    Rating:
    100%
    from S$0.88
    Min. 2 days
  31. Ball Catch Type I (ZDC)
    TOCHIGIYA Ball Catch Type I (ZDC)
    It is designed to be inserted and removed from two directions.
    Mass (g)  15.8  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    97%
    from S$5.99
    Min. 2 days
  32. Clean Catch with Waterproof Switch
    TAKIGEN MFG Clean Catch with Waterproof Switch
    The magnet catch and door switch are integrated. Since it is covered with a resin cover, the generation of dust is suppressed. It uses an IP67 waterproof switch. Uses neodymium, which has strong adsorption power. Since the mounting hole is a long hole, fine adjustment after mounting is possible. ... Read More
    Mass (g)  27  Operating Temperature Range (℃)  -40-80 (no freezing)  Withstand Voltage  AC1500V 1min  Attracting Force (N)  15  Material (Case)  Polyacetal (POM)  Insulation Resistance (MΩ)  Switch part: 100 or more  Contact Resistance (mΩ)  Initial value: 150 or less  Mechanical Life  50,000 times or more  Contact Capacity  AC125V 0.1A/DC12V 2A/DC24V 1A  Electrical Life  100,000 times or more  TAKIGEN code  50292 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  33. Thin magnet catch
    TAKIGEN MFG Thin magnet catch
    Thin size with a thickness of 3 mm. Since it uses neodymium magnets, it achieves high adsorption power. cabinet
    Material  Magnet / Neodymium  Material (Main Unit)  Steel Plate Cold Commercial (SPCC)  Mass (g)  16  Attracting Force (N)  30  Material (Strike)  Steel Plate Cold Commercial (SPCC)  Surface finish  Nickel plating (MFNi)  TAKIGEN code  24588 
    from S$4.19
    Min. 2 days
  34. Thin Magnet Catch
    Geo. Prince Takeshita Thin Magnet Catch
    Since it has an ultra-thin shape, it can be freely attached to places that could not be attached before. Distribution board, machine tool
    Finish  Black + nickel plating finish  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1.89
    Min. 2 days
  35. Type A ball catch
    Geo. Prince Takeshita Type A ball catch
    The strength of the spring can be adjusted with the upper and lower threads. Inspection doors, machine tools, fire extinguisher boxes, fire hydrant doors, packaging equipment, medical equipment, racks, control panel doors
    Material  Zinc die casting (ZDC)  Finish  Chrome plating finish  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$4.19
    Min. 2 days
  36. Square duracon catch
    TAKIGEN MFG Square duracon catch
    Since it is made of plastic, it works smoothly. Furniture / lockers / cabinets
    Color  White  Material (Main Unit)  Polyamide (PA)  Mass (g)  Load  (Reference) Unplug: 22N, Insert: 19N  Material (Strike)  Polyacetal (POM)  TAKIGEN code  20405 
    Rating:
    94%
    from S$1.09
    Min. 2 days
  37. Magnetic catch bracket for glass
    TOCHIGIYA Magnetic catch bracket for glass
    A magnet catch bracket with an excellent appearance that can be attached to glass or resin plates. The cushion absorbs the impact and protects the door. Glass doors, resin doors, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$0.35
    Min. 2 days
  38. Thin Magnet Catch
    TOCHIGIYA Thin Magnet Catch
    A thin and powerful magnet catch that uses neodymium magnets. Measuring equipment, OA equipment, furniture, home appliances, etc. * For mounting, use M3 flat head machine screws or flat rivets, and make a Φ5.0 flat hole on the mounting panel side. * Magnets are vulnerable to impacts due to their ... Read More
    Material  (Base) SPCC, (Magnet) Neodymium  Mass (g)  3.3  Operating Temperature Range (℃)  0~+60  Magnetic Attraction Force (N [kgf])  About 26.5 [2.7]  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    80%
    from S$2.39
    Min. 2 days
  39. magnet catch
    TRUSCO magnet catch
    A magnet catch with a simple structure and high versatility.
    Material (Main Unit)  Polyethylene (PE)  Mass (g)  25  Attracting Force (N)  28  Material (Strike)  Steel  Recommended Screw  (For receiving plate) 2.7mm 
    Rating:
    80%
    from S$1.39
    Min. 2 days
  40. Stainless box roller catch
    TAKIGEN MFG Stainless box roller catch
    Made of stainless steel and has excellent corrosion resistance. Since the roller part is made of resin, it operates smoothly. Since the mounting hole is a long hole, it can be adjusted after mounting. Kitchen doors / furniture
    Mass (g)  14  Material (Roller Part)  Rigid polyethylene (PE)  Maximum pull-out load (N [kgf])  About 24.7  TAKIGEN code  22326 
    from S$3.49
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 215

Set Ascending Direction