Latches

A simple latch with an integrated latch and lever. You can easily adjust the rattling of the panel by using the panel stopper. Measuring equipment, distribution boards, etc.

A simple latch lock that integrates a latch and a lever. Distribution board / measuring equipment

A push-lock / push-open one-cycle, two-action, one-touch latch. Audio equipment, home appliances, etc. * Do not apply excessive force (impact) to the main body when locking or unlocking. It may be damaged. * The deviation of the center between the main body (8 mm width direction) and the keeper s... Read More

It is a locking device that holds a secure locked state so that the door etc. will not open due to vibration or impact. Construction machinery, agricultural machinery, industrial machinery, vehicles, etc.

Align the fixed side panel and the moving side panel, and push in the plunger head to fix it. Panel stop of measuring equipment

Due to the built-in leaf spring of the latch part, the latch does not move naturally. Distribution board, measuring equipment, sash door * Screws are not included.

Since the rollers can be adjusted, the door can be opened and closed smoothly. Kitchen equipment, physics and chemistry equipment, distribution boards, distribution boards, measuring equipment, etc. * When adjusting the rollers, turn the adjust bolts evenly so that the rollers are parallel.

A latch that makes it easy to lock and unlock the door. Machine tools, measuring equipment, etc.

A washer that can be prevented from coming off by press-fitting it into the tip of a screw or bolt after the panel is inserted. The claw fits with the threaded part and exerts a strong effect. Preventing screws and bolts from falling off * When tapping holes in the housing, please perform smoothi... Read More

A slide latch that can be locked and unlocked with a single touch. Communication equipment, medical equipment, machine tools, etc.

Soft design with improved operability and rounded overall Sashes for buses, specially equipped vehicles, construction machinery, etc.

You can adjust the tightening allowance. Has excellent environmental resistance. Made of stainless steel and has excellent corrosion resistance. Especially vehicles, machine tools, ships

A small snatch lock for opening doors that is resistant to vibration and shock. Internal unlocking and remote control are possible. Specially equipped vehicles, containers, vibration equipment

Made of resin, it is flexible and does not scratch the floor. It is a soft design with few protrusions and is kind to people. The one with a keyhole can be locked with a padlock. Safety design in which the mounting screws are not visible from the outside when locked Hatches and boxes for ships an... Read More

A flat type with few protrusions from the door surface. The handle is held in the raised position. Made of stainless steel and has excellent corrosion resistance. Tank truck / specially equipped vehicle

Resin grommet and plunger. The lid and panel can be easily attached. Measuring equipment, distribution boards, electronic equipment, machine tools, etc.

The amount of protrusion of the roller can be adjusted with the adjusting screw. Distribution board / measuring equipment

The door can be opened and closed with a single touch. Measuring equipment, OA equipment, furniture, etc. * Do not apply excessive force (impact) to the main body when locking or unlocking. It may be damaged. * If there is a risk of excessive force being applied, install a stopper.

A latch unit with a built-in solenoid. To close the door, just push it in and open it with the power switch (not possible when locking). It also has a built-in mechanical lock for emergency use (* TL-258-1 and TL-259-1 only). Switchboards, distribution boards, control boards, lockers, etc.

A slide latch that can be locked and unlocked with a single touch. Communication equipment, medical equipment, machine tools, etc. * Only the main body is included, and the receiving side is not included.

Raise the ring to activate the latch and open the door. If you want to close it, you can close it with one touch. Distribution board, wooden furniture, vehicle-related tool box

You can adjust the tightening allowance with a screwdriver. Machine tools, switchboards, containers

It is a low-cost type that is smaller and thinner than the conventional C-313-3 and has a smaller installation space. The lock is a reversible key TAK60 with a dustproof shutter that has excellent operability. * Because it is designed exclusively for TAK60, other locks cannot be installed.

It is made of stainless steel and has excellent corrosion resistance. Small. Distribution board / measuring equipment

The 10mm latch operates by rotating 50 ° to the left and right. Ideal for one-touch doors Construction machinery, specially equipped vehicles, buses

You can adjust the tightening allowance. Made of stainless steel and has excellent corrosion resistance. Special vehicles / machine tools / ships

One-touch opening and closing by simply pushing the head of the plug for both locking and unlocking. There is no need to turn it like a conventional fastener. Since it is locked by the cam, it will not loosen due to vibration. Make sure to push the plug all the way in. Lightweight door

Holds the door strongly despite its small size. Remote control from various handles and locks can be easily set. Easy to install. Left and right combined type Small doors and small bus lids for vehicles * Brackets are not included.

Vibration absorption / tightening fastener by spring action. There is little protrusion on the surface, and the tightening is strong. It can be easily operated with coins. Eyelets for screw type fasteners In addition to eyelets TL-192, eyelets for T type sign fasteners TL-GT-8 can be used. Please... Read More

You can adjust the tightening allowance. It can be locked with a padlock. Has excellent environmental resistance. Special vehicles / machine tools / ships * When mounting with countersunk screws, tapping screws, etc., chamfer the housing side.

A bush that allows you to easily connect rods. It does not come off even with vibration.

Made of stainless steel and has excellent corrosion resistance. Holds the door strongly despite its small size. Remote control from various handles and locks can be easily set. Easy to install. Left and right combined type Small doors and small bus lids for vehicles * Brackets are not included.

A small snatch lock for opening doors that is resistant to vibration and shock. Internal unlocking and remote control are possible. Specially equipped vehicles, containers, vibration equipment

Made of stainless steel and has excellent corrosion resistance. Designed to withstand vibration and shock. Ideal for small doors, shutters, etc. Sliding doors, small shutter doors for special vehicles, small lids, door catches for inspection doors, vibration equipment

Since the latch part is made of resin, it closes quietly. Measuring equipment / environmental equipment