All Category

Concealed Hinges

View : Grid List
Filter

Items 1 - 40 of 149

Set Ascending Direction
  1. Stainless steel hinges
    TAKIGEN MFG Stainless steel hinges
    Due to the special blade shape, a large opening angle of about 130 ° can be secured. There are torque hinge type and normal type. Office equipment / furniture / control panel
    from S$9.59
    Min. 2 days
  2. Concealed Hinge for Door
    TOCHIGIYA Concealed Hinge for Door
    It is a hinge that cannot be seen from the table. Distribution boards, distribution boards, communication equipment, measuring equipment, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    95%
    from S$2.39
    Min. 2 days
  3. Stainless torque back hinge
    TAKIGEN MFG Stainless torque back hinge
    Due to the special blade shape, a large opening angle of about 130 ° can be secured. There are torque hinge type and normal type. Office equipment / furniture / control panel
    Operation Ambient Temperature (℃)  0~+40  Surface finish  Blade / barrel polishing 
    from S$12.99
    Min. 6 days
  4. Hidden free stop hinge
    TOCHIGIYA Hidden free stop hinge
    A hinge that can stand still at any position. It can be mounted on the back side (inside) so as not to spoil the appearance of the housing. It can be installed by welding, used horizontally and vertically. Communication equipment, switchboards, audio equipment, amusement equipment, machine tools,... Read More
    Operating Temperature Range (℃)  0~+60  Type of Terminal Fitting  Screwing or welding  Set torque (Nm)  0.735±0.147(7.5kgf・cm±1.5)  RoHS directive (corresponding to 10 substances)  Correspondence  Weight (g)  44.9 
    from S$18.99
    Min. 2 days
  5. Lift-Off Concealed Hinge
    TOCHIGIYA Lift-Off Concealed Hinge
    It is a hinge that cannot be seen from the table. Distribution boards, distribution boards, communication equipment, etc.
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$3.89
    Min. 6 days
  6. Steel Concealed Hinge (Loose Pin)
    Geo. Prince Takeshita Steel Concealed Hinge (Loose Pin)
    Since it is installed inside the door, the hinges cannot be seen. Distribution board door, distribution board door * E-ring is not included. Please prepare separately.
    Type  Equipment and machinery  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$1.49
    Min. 44 days
  7. Concealed Hinge Type 1 (L = 32)
    TAKIGEN MFG Concealed Hinge Type 1 (L = 32)
    Distribution board, vending machine, measuring equipment, communication equipment
    Mass (g)  66  Material (Fan Blade)  Steel Plate Cold Commercial (SPCC)  TAKIGEN code  10063 
    from S$2.69
    Min. 6 days
  8. Stainless reverse hinge type 1 (L = 20 fixed type)
    TAKIGEN MFG Stainless reverse hinge type 1 (L = 20 fixed type)
    Distribution board, control panel, vending machine, ship, vehicle, kitchen equipment, outdoor equipment
    Material  Stainless steel sheet (SUS304)  Mass (g)  20  Surface finish  Gloss barrel polishing  TAKIGEN code  10612 
    from S$4.19
    Min. 2 days
  9. L-shaped back hinge (2 tubes) (L1 = 65 H1 = 15 H2 = 4.8)
    TAKIGEN MFG L-shaped back hinge (2 tubes) (L1 = 65 H1 = 15 H2 = 4.8)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Steel Plate Cold Commercial (SPCC)  Mass (g)  58  Surface finish  Phosphate  TAKIGEN code  11690 
    from S$2.79
    Min. 6 days
  10. Iron Back Hinge (Core Bar Caulking) 20 mm
    Geo. Prince Takeshita Iron Back Hinge (Core Bar Caulking) 20 mm
    Since it is installed inside the door, the hinges cannot be seen. Distribution board door, distribution board door
    Material  Steel Plate Cold Commercial (SPCC)  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$1.39
    Min. 8 days
  11. Stainless steel L type back hinge type 1 (L = 90)
    TAKIGEN MFG Stainless steel L type back hinge type 1 (L = 90)
    Made of stainless steel and has excellent corrosion resistance. It is small and the opening of the housing can be used widely. Easy to install with a removable hinge. Distribution board / measuring equipment / communication equipment
    Surface finish  Phosphate  TAKIGEN code  10840 
    from S$10.99
    Min. 6 days
  12. Adjustment Spacer (t = 1.0mm)
    Geo. Prince Takeshita Adjustment Spacer (t = 1.0mm)
    Easy to install due to U-shaped slit. B-150, B-160, B-161 series adjustment spacers * Loosen the hinge mounting screw and insert from the top.
    Material  Stainless steel sheet (SUS-430)  Finish  2B 
    from S$1.09
    Min. 8 days
  13. Iron back hinge
    Geo. Prince Takeshita Iron back hinge
    Since it is installed inside the door, the hinges cannot be seen. Distribution board door, distribution board door, control board door
    Type  Equipment and machinery  Material  Hot rolled steel plate (SPHC)  Mass (g)  179  RoHS directive (corresponding to 10 substances)  Correspondence  Recommended E-ring  Φ4 
    from S$4.19
    Min. 8 days
  14. Stainless reverse hinge type 1 (L = 40 fixed type)
    TAKIGEN MFG Stainless reverse hinge type 1 (L = 40 fixed type)
    Distribution board, control panel, vending machine, ship, vehicle, kitchen equipment, outdoor equipment
    Material  Stainless steel sheet (SUS304)  Mass (g)  95  Surface finish  Gloss barrel polishing  TAKIGEN code  10609 
    from S$9.59
    Min. 6 days
  15. For weight, square back hinge
    TAKIGEN MFG For weight, square back hinge
    The shaft can be inserted and removed for easy installation. Cubicles / switchboards / control boards
    Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$4.89
    Min. 6 days
  16. Iron back hinge
    Geo. Prince Takeshita Iron back hinge
    Since it is installed inside the door, the hinges cannot be seen. Distribution board door, distribution board door
    Type  Equipment and machinery  Material  Steel Plate Cold Commercial (SPCC)  RoHS directive (corresponding to 10 substances)  Correspondence  Recommended E-ring  Φ4 
    from S$1.89
    Min. 8 days
  17. Stainless steel reverse hinge
    TAKIGEN MFG Stainless steel reverse hinge
    A heavy back hinge using a stainless steel plate with a thickness of 4 mm. Compact design that fits in a narrow space All stainless steel Large switchboard / cubicle / control panel
    Material  Stainless steel sheet (SUS304)  Surface finish  Barrel polishing  TAKIGEN code  13471 
    from S$22.99
    Min. 6 days
  18. Back hinge for weight (L = 80, shaft Φ8)
    TAKIGEN MFG Back hinge for weight (L = 80, shaft Φ8)
    There is a cushion on the hinge on the housing side. A stud stands on the hinge on the housing side, making installation easy. The shaft can be inserted and removed for easy installation. Large switchboard / cubicle / control board switchboard / cubicle / control board switchboard / cubicle / con... Read More
    Material  Hot rolled steel plate (SPHC)  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10159 
    from S$16.99
    Min. 2 days
  19. Stainless steel L type back hinge type 1
    TAKIGEN MFG Stainless steel L type back hinge type 1
    Distribution board / measuring equipment / communication equipment
    Material  Stainless steel sheet (SUS304)  Surface finish  Phosphate 
    from S$5.79
    Min. 6 days
  20. U type back hinge type 1
    TAKIGEN MFG U type back hinge type 1
    The removable hinge makes it easy to attach to the housing. Distribution board / measuring equipment / communication equipment
    Material  Steel Plate Cold Commercial (SPCC)  Mass (g)  185  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10484 
    from S$4.79
    Min. 6 days
  21. Back hinge for weight (L = 55, shaft Φ6)
    TAKIGEN MFG Back hinge for weight (L = 55, shaft Φ6)
    There is a cushion on the hinge on the housing side. A stud stands on the hinge on the housing side, making installation easy. The shaft can be inserted and removed for easy installation. Large switchboard / cubicle / control board switchboard / cubicle / control board switchboard / cubicle / con... Read More
    Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10161 
    from S$6.19
    Min. 6 days
  22. Stainless steel U-shaped back hinge
    TAKIGEN MFG Stainless steel U-shaped back hinge
    Made of stainless steel and has excellent corrosion resistance. Distribution board / measuring equipment / communication equipment
    Material  Stainless steel sheet (SUS304)  Surface finish  Phosphate  TAKIGEN code  11511 
    from S$7.59
    Min. 6 days
  23. Back hinge for weight (L = 80, shaft φ6)
    TAKIGEN MFG Back hinge for weight (L = 80, shaft φ6)
    There is a cushion on the hinge on the housing side. A stud stands on the hinge on the housing side, making installation easy. The shaft can be inserted and removed for easy installation. Large switchboard / cubicle / control board switchboard / cubicle / control board switchboard / cubicle / con... Read More
    Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10160 
    from S$11.99
    Min. 6 days
  24. L-shaped back hinge (3 tubes) (L = 85)
    TAKIGEN MFG L-shaped back hinge (3 tubes) (L = 85)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Phosphate  TAKIGEN code  11703 
    from S$4.69
    Min. 6 days
  25. L-shaped back hinge (2 tubes) (L1 = 45 H1 = 15 H2 = 4.8)
    TAKIGEN MFG L-shaped back hinge (2 tubes) (L1 = 45 H1 = 15 H2 = 4.8)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Steel Plate Cold Commercial (SPCC)  Mass (g)  39  Surface finish  Phosphate  TAKIGEN code  11689 
    from S$2.69
    Min. 6 days
  26. Hidden clean hinge
    TOCHIGIYA Hidden clean hinge
    By adopting a high-performance bush between the hinge piece and the shaft, the slidability is improved and the generation of metal powder due to friction is suppressed. In addition, since there is little frictional resistance, the hinge opens and closes smoothly. It is a type of hinge that can be... Read More
    Mass (g)  89  Operating Temperature Range (℃)  -40~80  Flame Retardance  (UL)94HB  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$26.99
    Min. 8 days
  27. L-shaped back hinge
    TAKIGEN MFG L-shaped back hinge
    It is a removable type and easy to install. Distribution board / cubicle / control board
    Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$4.89
    Min. 6 days
  28. Stainless steel L-shaped back hinge (3 tubes)
    TAKIGEN MFG Stainless steel L-shaped back hinge (3 tubes)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Stainless steel sheet (SUS304)  Surface finish  Phosphate 
    from S$8.89
    Min. 2 days
  29. Stainless steel, reverse hinge type 1 (L = 25, insert / remove type)
    TAKIGEN MFG Stainless steel, reverse hinge type 1 (L = 25, insert / remove type)
    Distribution board, control panel, vending machine, ship, vehicle, kitchen equipment, outdoor equipment
    Material  Stainless steel sheet (SUS304)  Mass (g)  35  Surface finish  Gloss barrel polishing  TAKIGEN code  11299 
    from S$6.59
    Min. 6 days
  30. Concealed Hinge Type 1 (L = 50 Insertion / Removal Type)
    TAKIGEN MFG Concealed Hinge Type 1 (L = 50 Insertion / Removal Type)
    Distribution board, vending machine, measuring equipment, communication equipment
    Mass (g)  136  Material (Fan Blade)  Steel Plate Cold Commercial (SPCC)  TAKIGEN code  10061 
    from S$3.89
    Min. 6 days
  31. Flat back hinge
    TAKIGEN MFG Flat back hinge
    The lower hinge shaft can be inserted and removed, and the door can be removed. Small doors for measuring instruments, lockers, etc.
    Material  Hot rolled steel plate (SPHC)  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$3.49
    Min. 6 days
  32. Concealed Hinge Type 4 (L = 65)
    TAKIGEN MFG Concealed Hinge Type 4 (L = 65)
    It is a removable type and can be easily attached to the door and housing. Distribution board / measuring equipment / communication equipment
    Material  Steel Plate Cold Commercial (SPCC)  Mass (g)  145  TAKIGEN code  10494 
    from S$5.29
    Min. 6 days
  33. Stainless steel L-shaped back hinge (2 tubes) (L1 = 45)
    TAKIGEN MFG Stainless steel L-shaped back hinge (2 tubes) (L1 = 45)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Stainless steel sheet (SUS304)  Mass (g)  37  Surface finish  Phosphate  TAKIGEN code  12767 
    from S$7.29
    Min. 6 days
  34. Stainless steel reverse hinge for weight (L = 55, shaft Φ6)
    TAKIGEN MFG Stainless steel reverse hinge for weight (L = 55, shaft Φ6)
    There is a cushion on the hinge on the housing side. A stud stands on the hinge on the housing side, making installation easy. The shaft can be inserted and removed for easy installation. Large switchboard / cubicle / control board switchboard / cubicle / control board switchboard / cubicle / con... Read More
    Material  Stainless steel sheet (SUS304)  Surface finish  Phosphate  TAKIGEN code  10664 
    from S$15.99
    Min. 5 days
  35. Stainless steel L-shaped back hinge (3 tubes)
    TAKIGEN MFG Stainless steel L-shaped back hinge (3 tubes)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Stainless steel sheet (SUS304)  Surface finish  Phosphate  TAKIGEN code  12977 
    from S$19.99
    Min. 6 days
  36. Stainless steel L-shaped back hinge (2 tubes) (L1 = 85)
    TAKIGEN MFG Stainless steel L-shaped back hinge (2 tubes) (L1 = 85)
    Ideal as a back hinge for distribution boards, control panels, and other waterproof panels.
    Material  Stainless steel sheet (SUS304)  Surface finish  Phosphate 
    from S$10.99
    Min. 6 days
  37. Iron chromate reverse hinge
    Geo. Prince Takeshita Iron chromate reverse hinge
    Since it is installed inside the door, the hinges cannot be seen. Comes with an E-ring. Distribution board door, distribution board door, control board door
    Type  Equipment and machinery  Material  Steel Plate Cold Commercial (SPCC)  Mass (g)  183  Finish  Galvanized colored chromate treatment  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$5.39
    Min. 12 days
  38. Square back hinge with spring
    TAKIGEN MFG Square back hinge with spring
    With a spring, the door can be opened and closed smoothly. Distribution board / control board / machine tools
    Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C) 
    from S$8.69
    Min. 2 days
  39. L-shaped reverse hinge type 6 (L = 110)
    TAKIGEN MFG L-shaped reverse hinge type 6 (L = 110)
    Distribution board / measuring equipment / communication equipment
    Material  Hot rolled steel plate (SPHC)  Mass (g)  275  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10507 
    from S$7.59
    Min. 6 days
  40. U type reverse hinge type 3 (L = 62)
    TAKIGEN MFG U type reverse hinge type 3 (L = 62)
    The U-shaped part has a large size and is suitable for housings with large door protrusions. Distribution board / measuring equipment / communication equipment
    Material  Steel Plate Cold Commercial (SPCC)  Surface finish  Zinc plating chromate treatment (MFZn-C)  TAKIGEN code  10511 
    from S$4.79
    Min. 6 days
View : Grid List
Filter

Items 1 - 40 of 149

Set Ascending Direction