T Handles
IMAO Square T handleIt can be used for the part that is lifted vertically by operating the handle.Operating Temperature Range (℃) -30～130 Thread Diameter M - Heat Resistance Temperature (℃) 130 Handle Color Matte black Material (Handle) Polyamide (glass fiber reinforced)- IMAO Speed handleType Female screw Material (Main Unit) FCD450 Color (Body) Black Surface Treatment (Main Unit) Powder baking
- KONISHI MFG (MIYOSHI) Tea handle (male thread) TH-NLOperating Temperature (℃) max80 min-20 Material (Screw) Steel SUM22L, trivalent chromate
- IMAO Safety adjust type T handleIt can be operated only when the handle is pushed down, and there is no worry of malfunction due to contact. Knurling is applied to the bottom of the main body, so the initial tightening work can be done easily.Operating Temperature Range (℃) -30～130 Handle Color Matte black Color (Cap) Blackfrom S$22.99Min. 3 days
- Geo. Prince Takeshita T handleSteel furniture, switchboard doors, distribution board doorsMaterial Zinc die casting (ZDC) Classification Equipment and machinery Mass (g) 85 Finish Chrome plating finish
- TAKIGEN MFG T handleDistribution board / control boardMaterial Zinc alloy (ZDC) Surface finish Chrome plating (MZCr)from S$8.69Min. 2 days
- TAKIGEN MFG T handleLeft and right combined type Distribution board / control boardMaterial Zinc alloy (ZDC) Mass (g) 191 Surface finish Chrome plating (MZCr) TAKIGEN code 00563from S$28.99Min. 2 days
- KONISHI MFG (MIYOSHI) Balance handle TH-N* Grip is not included. Select the required grip part number separately from the handle.Material Steel SUM22 Surface Treatment Chrome-platedfrom S$44.99Min. 6 days
- IMAO TH-N Square T handleWhen used under high temperature or high humidity conditions, the material properties of the resin may deteriorate.Operating Temperature Range (℃) -30～130 Heat Resistance Temperature (℃) 130 Handle Color Matte black
- KONISHI MFG (MIYOSHI) Tea handle (Female thread) TH-NOperating Temperature (℃) max80 min-20 Material (Screw) Brass C3604B Dimension L -from S$10.99Min. 6 days
- IMAO SH speed handleMaterial (Main Unit) FCD450 Color (Body) Black Surface Treatment (Main Unit) Powder bakingfrom S$13.99Min. 2 days
- IMAO T handleOperating Temperature Range (℃) -20～110 Heat Resistance Temperature (℃) 120 Handle Color Black Material (Insert Nut) SUM22L Material (Handle) Phenolic resin reamer diameter (mm) 6 Surface treatment (insert) Iron oxide coating Surface treatment (handle) Glossy finishfrom S$18.99Min. 2 days
- KONISHI MFG (MIYOSHI) Speed handle SHMaterial Ductile Iron FCD450 Surface Treatment Black Chijimi baking finish Dimension R 50 Dimension H 56 Dimension L 39from S$13.99Min. 6 days
- KONISHI MFG (MIYOSHI) Mitsutama handle MHMaterial Steel SUM22 Surface Treatment Chrome-plated Dimension d1 5from S$46.99Min. 6 days
- TAKIGEN MFG T-type specially equipped vehicle handleThe left and right dual-purpose lock is a reversible key with a dustproof shutter. Please use in combination with various products compatible with 8 mm square bars. When combined with C-168, the door can be opened with a handle rotation angle of approximately 45 °. Bus / specially equipped vehicl... Read MoreMaterial Zinc alloy (ZDC) TAKIGEN code 04672from S$32.99Min. 6 days
-
- KONISHI MFG (MIYOSHI) Tea handle (reamer hole) THOperating Temperature (℃) max110 min-20 Material (Screw) Steel SUM22L, trivalent chromate Material (Knob) Black phenolic resinfrom S$15.99Min. 6 days
- ESCO M6 / 40x13mm T type knob (Female thread)Specification Female thread Screw size M6from S$14.99Min. 3 days
- IMAO TH-A square T handle (aluminum)It is a RoHS directive compliant product.from S$46.99Min. 4 days
- ESCO M10x30 / 80x20mm T type knob (Male thread)Specification Male thread Screw size M10×30mmfrom S$18.99Min. 3 days
- TAKIGEN MFG T-type specially equipped vehicle handleThe left and right dual-purpose lock is a reversible key with a dustproof shutter. Please use in combination with various products compatible with 8 mm square bars. When combined with C-168, the door can be opened with a handle rotation angle of approximately 45 °. Bus / specially equipped vehicl... Read MoreMaterial Zinc alloy (ZDC)from S$11.99Min. 6 days
- ESCO M8 / 67x16mm T type knob (Female thread)Specification Female thread Screw size M8from S$18.99Min. 3 days
- HALDER Tommy nut with DIN6307 movable leverMaterial Free cutting steel / black dyeing RoHS directive (corresponding to 10 substances) Correspondencefrom S$39.99Min. 12 days
- KONISHI MFG (MIYOSHI) Both grip handles WH-N* Grip is not included. Select the required grip part number separately from the handle. You will need two grips.Material Steel SUM22 Surface Treatment Chrome-platedfrom S$49.99Min. 6 days
- ESCO M6x20 / 40x13mm T type knob (Male thread)Specification Male thread Screw size M6×20mmfrom S$11.99Min. 3 days
- ESCO M6 / 55x14mm T type knob (Female thread)Specification Female thread Screw size M6from S$17.99Min. 3 days
- ESCO M12 / 94x21mm T knob (Female thread)Specification Female thread Screw size M12from S$29.99Min. 3 days
- HALDER Tommy screw, DIN6306 with movable lever / thrust pad shape EShape E RoHS directive (corresponding to 10 substances) Correspondencefrom S$49.99Min. 12 days
- HALDER Tommy screw, DIN6306 with movable lever / thrust padless shape DShape D RoHS directive (corresponding to 10 substances) Correspondencefrom S$44.99Min. 12 days
- Geo. Prince Takeshita Knob handleIt is a knob type handle made of resin. Compatible with PH-58 etc. and panel cut. It is a left and right combined type. Dedicated clasp is attached. Distribution board doors, distribution board doors, control panel doors, equipment, etc.Material Polyamide (PA) + Zinc die casting (ZDC) Finish Black RoHS directive (corresponding to 10 substances) Correspondence Field Equipment and machineryfrom S$5.99Min. 8 days
- Geo. Prince Takeshita T-type tightening handleIt is a left and right combined type. The door can be tightened by the spring reaction force in the depth direction. Suppresses rattling of the door. Dedicated clasp is attached. Measuring equipment, switchboard door, switchboard inner doorMaterial Zinc die casting (ZDC) Classification Equipment and machinery Mass (g) 80 Finish Black paint finish RoHS directive (corresponding to 10 substances) Correspondencefrom S$11.99Min. 8 days
- Geo. Prince Takeshita Small knob handle made of resinIt is a left and right combined type. Dedicated clasp is attached. It can be attached by fitting it into the panel cut with the clasp attached. Distribution board doors, distribution board doors, equipment, etc.Material Polyamide (PA) + Zinc die casting (ZDC) Finish Black RoHS directive (corresponding to 10 substances) Correspondence Field Equipment and machineryfrom S$5.99Min. 7 days
- ESCO M8x25 / 67x16mm T type knob (Male thread)Specification Male thread Screw size M8×25mmfrom S$15.99Min. 3 days
-
- ESCO M8 / 80x20mm T knob (Female thread)Specification Female thread Screw size M8from S$18.99Min. 3 days
- Geo. Prince Takeshita Wing handle + key + sameIt is a left and right combined type. Compatible with PH-58 etc. and panel cut. Comes with a clasp. Waterproof performance is equivalent to IPX3. Distribution board, distribution board, control board, equipment, etc. * Only the same key specifications are available.Material Zinc die casting (ZDC) Finish Chrome plating finish RoHS directive (corresponding to 10 substances) Correspondence Field Equipment and machineryfrom S$15.99Min. 7 days
- HALDER T grip / with blind hole (without female thread)RoHS directive (corresponding to 10 substances) Correspondencefrom S$39.99Min. 12 days
-
- ESCO M8x20 / 55x14mm T type knob (Male thread)Specification Male thread Screw size M8×20mmfrom S$14.99Min. 3 days
- Geo. Prince Takeshita Handle with keyholeIt can be locked with a padlock. Compatible with PH-58 etc. and panel cut. Dedicated clasp is attached. Distribution board doors, distribution boards, control panel doors, equipment, etc. * Only right-handed. * Padlock is sold separately.Material Zinc die casting (ZDC) Finish Chrome plating RoHS directive (corresponding to 10 substances) Correspondencefrom S$8.19Min. 14 days
