All Category

Adjustment Bolts

Adjustment bolts are parts used for positioning when installing machinery. In addition to the foot jack that combines the base with the bolt, the leveling block is also included in the adjustment bolt category. It is used for precise installation and positioning in machine tools and industrial machines, and has a wide range of uses. In addition to metal bases, there are rubber base covers that are processed to prevent damage to the installation surface, so it is effective when installing the machine on a machine or when you do not want to damage the floor surface. is.

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 179

Set Ascending Direction
  1. Safety adjuster with non-slip Standard type
    No Brand Safety adjuster with non-slip Standard type
    An adjuster with a non-slip sheet that exerts a strong anti-slip effect. Since the grounding part and the knob rotate independently, you can make adjustments while they are installed. The non-slip sheet uses a "pit cushion sheet" that does not stain the floor. If the adhesive strength o... Read More
    Allowable Load (kg)  (Vertical) 50  Dimension H (mm)  18  Dimension D (Φmm)  30  RoHS Directive  6 substances  Type  Standard type 
    Rating:
    69%
    from S$3.89
    Min. 2 days
  2. Inclined Underlay Wedge
    TRUSCO Inclined Underlay Wedge
    Width (mm)  40  Length (mm)  70  Mass (g)  90  Height (mm)  20  Material  Polypropylene (PP)  Trusco Part No.  102-7295 
    from S$11.99
    Min. 2 days
  3. Swivel Pad
    NABEYA Swivel Pad
    Dimension H (°)  18° 
    from S$17.99
    Min. 2 days
  4. Leveling Bolt Nut
    NABEYA Leveling Bolt Nut
    Rating:
    100%
    from S$0.45
    Min. 2 days
  5. Leveling foot
    NABEYA Leveling foot
    Dimension G (°)  20° 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  6. Stud leveling foot
    NABEYA Stud leveling foot
    Dimension F (mm)  50 
    from S$25.99
    Min. 2 days
  7. Foot jack FJ type (standard type)
    NABEYA Foot jack FJ type (standard type)
    A hexagon nut is press-fitted to the bottom of the base, and the FJ-S type can be assembled quickly with an impact wrench or the like. The FJ type has a + arrow on the bottom of the base and can be assembled by a driver or the like.
    from S$4.59
    Min. 4 days
  8. Square pipe joint
    NABEYA Square pipe joint
    Surface Treatment  Screw bush: nickel plating 
    from S$17.99
    Min. 4 days
  9. Foot jack FJC type (heavy load type)
    NABEYA Foot jack FJC type (heavy load type)
    The bottom of the base is hit with a + arrow and can be assembled by a driver or the like.
    Surface Treatment  Zinc trivalent chromate 
    from S$8.79
    Min. 4 days
  10. Foot jack FJB type (Rubber base type)
    NABEYA Foot jack FJB type (Rubber base type)
    The bottom of the base is hit with a + arrow and can be assembled quickly with an impact wrench. A nylon washer is incorporated on the upper surface of the base for smooth operation. The bottom rubber is liquid resistant (gasoline, kerosene, acid, alkali) and can be used at -20 ° C to 120 ° C. Th... Read More
    from S$7.79
    Min. 4 days
  11. Foot jack FJR type (type with rubber)
    NABEYA Foot jack FJR type (type with rubber)
    Since it has rubber, it does not damage the floor and has an anti-slip effect. A hexagon nut is press-fitted into the bottom of the base, and it can be assembled quickly with an impact wrench or the like. Rubber is liquid resistant (gasoline, kerosene, acid, alkali) and can be used at -22 ° C to ... Read More
    Rating:
    100%
    from S$7.99
    Min. 4 days
  12. Tightening Nut
    Iwata Mfg. Tightening Nut
    The width across flats and the wall thickness are thin, and it can be turned with a small spanner.
    Rating:
    100%
    from S$8.99
    Min. 4 days
  13. Leveling block A type
    NABEYA Leveling block A type
    The accuracy is good. Machine installation costs are reduced. The rigidity is the best. Easy to install. Most suitable for installation of milling machines, radial drilling machines, planers, surface plates, etc.
    10 degrees 26 minutes  Dimension A (mm)  129  Dimension G (mm)  15  Dimension P (mm)  15  Dimension K (mm)  17  Dimension I (mm)  21  Dimension H (mm)  29  Mass (kg)  3.3  Dimension L (mm)  30  Dimension N (mm)  30  Lifting Height (mm)  Dimension D (mm)  Dimension F (mm)  62  Dimension C (mm)  66  Stroke (mm)  66~70  Dimension M (mm)  69  Dimension O (mm)  69  Allowable Load (kN)  Dimension E (mm)  95  Dimension B (mm)  95  Nominal Size of Screw  M12  Dimension J  M12×1.75 
    from S$129.90
    Min. 2 days
  14. Leveling plate round type (stationary type)
    NABEYA Leveling plate round type (stationary type)
    Easy to install and move
    from S$25.99
    Min. 4 days
  15. Fixing plate for foot jack
    NABEYA Fixing plate for foot jack
    Used for fixing foot jacks.
    Mass (kg)  0.1  Dimension B (mm)  13  Dimension H (mm)  14  Dimension J (mm)  20  Dimension F (mm)  20  Dimension G (mm)  25  Dimension I (mm)  Dimension D (mm)  50  Dimension K (mm)  50  Dimension E (mm)  65  Dimension L (mm)  Dimension C (mm)  94 
    from S$7.99
    Min. 4 days
  16. Foot jack FPS type
    NABEYA Foot jack FPS type
    Dimension G (mm)  18  Dimension I (mm) 
    from S$9.79
    Min. 4 days
  17. Leveling bolt (B type)
    NABEYA Leveling bolt (B type)
    The tip has a spherical shape, and the adjustment angle with the leveling plate is free. The width of the two sides of the head is small, which is convenient for work in narrow spaces. In addition, workability is good because the operation with a box wrench does not slip down.
    from S$11.99
    Min. 2 days
  18. Safety adjuster with non-slip switch type
    No Brand Safety adjuster with non-slip switch type
    A quick action adjuster that raises and lowers the anti-slip sheet just by turning the operation knob and immediately exerts an anti-slip effect. You can easily switch between "sliding and fixing" for smooth installation and movement. The non-slip sheet uses a "pit cushion sheet&qu... Read More
    Dimension D (Φmm)  30  Dimension H (mm)  33  Dimension W (mm)  37  RoHS Directive  6 substances  Type  Switch type 
    from S$6.39
    Min. 5 days
  19. Leveling plate Round type / Deferred type
    Iwata Mfg. Leveling plate Round type / Deferred type
    A leveling system that supports the level adjustment of heavy-duty machines from your feet.
    Type  Round stationary type 
    Rating:
    100%
    from S$25.99
    Min. 17 days
  20. Swivel nut / small mounting surface
    HALDER Swivel nut / small mounting surface
    from S$22.99
    Min. 7 days
  21. Adjust jack bolt
    NABEYA Adjust jack bolt
    Included Accessories  1 lock nut  Heat Treatment  Hardened (Spherical tip) HRC50-56  Material  S45C  Surface Treatment  Unichrome plating 
    from S$11.99
    Min. 2 days
  22. Spherical nut for level adjustment
    NABEYA Spherical nut for level adjustment
    The combination of a spherical nut and a tapered washer absorbs tilts up to 2 degrees. The taper washer has a smaller area than the spherical washer and can be adjusted with less torque. It is a rust-resistant SUS304 material. Can be used in clean rooms. * Spherical nuts and taper washers are sol... Read More
    F(°)  2°  Material  SUS304 
    Rating:
    20%
    from S$11.99
    Min. 4 days
  23. Foot jack FJP type
    NABEYA Foot jack FJP type
    The end symbol S type has stainless steel screws and nuts. The tail symbol PS type has a rubber pad on the bottom. The end symbol B type has the hardness type: S of No.E-698 anti-vibration plate.
    from S$15.99
    Min. 4 days
  24. Leveling plate raising type (stationary type)
    NABEYA Leveling plate raising type (stationary type)
    This is effective when arranging large and small machines on a line and piping on the underside of the machine. After placement, the bottom floor of the machine can be easily cleaned. Easy to install and move.
    Dimension E (mm)  40  Material  FC250  Dimension G (mm)  20  Dimension F (mm)  Surface Treatment  Nickel plating 
    from S$64.99
    Min. 4 days
  25. Leveling bolt (with holes)
    NABEYA Leveling bolt (with holes)
    Useful for fixing the machine to the leveling plate and foundation. The B type has a small width across two sides of the head, making it convenient for work in narrow spaces. In addition, workability is good because the operation with a box wrench does not slip down.
    Dimension B (mm)  100  Dimension D (mm)  13  Dimension E (mm)  Dimension C (mm)  80 
    from S$17.99
    Min. 4 days
  26. Block for adjustment screw (type with counterbore) (iron trioxide coating)
    No Brand Block for adjustment screw (type with counterbore) (iron trioxide coating)
    Surface Treatment  Iron oxide coating  Material  SS400 
    Rating:
    80%
    from S$13.99
    Min. 9 days
  27. Leveling plate Raising / Deferring type
    Iwata Mfg. Leveling plate Raising / Deferring type
    A leveling system that supports the level adjustment of heavy-duty machines from your feet. This is convenient when arranging machines of different heights in a line, or when cleaning or maintaining the underside of the machine.
    Material  Iron  Type  Uplift type stationary type 
    from S$53.99
    Min. 4 days
  28. Leveling bolt (A type)
    NABEYA Leveling bolt (A type)
    The tip has a spherical shape, and the adjustment angle with the leveling plate is free.
    from S$14.99
    Min. 4 days
  29. Foot jack FJK type (fixed type)
    NABEYA Foot jack FJK type (fixed type)
    The end symbol S type has stainless steel screws and nuts.
    Dimension J (mm)  120  Dimension L (mm)  14  Dimension E (mm)  17  Dimension H (mm)  Load Capacity (kN)  Dimension K (mm)  65  Dimension F (mm)  75 
    from S$12.99
    Min. 4 days
  30. Foot jack mounting plate
    NABEYA Foot jack mounting plate
    Used for fixing foot jacks.
    Material  SS400  Surface Treatment  Unichrome 
    from S$3.59
    Min. 4 days
  31. Foot jack FAS type
    NABEYA Foot jack FAS type
    Dimension G (mm)  18  Dimension I (mm) 
    from S$22.99
    Min. 6 days
  32. 1500kg Leveling Block
    ESCO 1500kg Leveling Block
    Tough installation adjustment is possible by using anchor bolts together. Since it can be installed easily, the installation cost can be reduced.
    Allowable Load (kg)  1500  Dimensions, Width W x Depth D x Height H (mm)  170×140×80  Lifting Height (mm)  Mass (kg)  9.0  Material  Cast iron  Esco Part No.  EA949HT-22 
    from S$259.90
    Min. 6 days
  33. Foot jack FJV type
    NABEYA Foot jack FJV type
    Load Capacity (kN)  23  Surface Treatment  Chromate plating  Material  SWRCH15R 
    from S$4.39
    Min. 4 days
  34. Leveling plate Round type / Fastening type
    Iwata Mfg. Leveling plate Round type / Fastening type
    A leveling system that supports the level adjustment of heavy-duty machines from your feet.
    Bolt Diameter (Φmm)  10×1.5  Nominal Size of Screw  M10  Type  Round fastening type 
    from S$27.99
    Min. 4 days
  35. Level jack
    NABEYA Level jack
    The main body is made of FC250 tough cast iron and is durable. The working load is 2TON.
    Load Capacity (kN)  100  Working Load (Nm)  750 
    from S$89.99
    Min. 4 days
  36. Bolt with swivel pad Bolt size 12 mm
    NEW STRONG Bolt with swivel pad Bolt size 12 mm
    It is a receiving bolt of the clamp. It can be used even if the clamp is slightly tilted. It can also be used on the T-groove. For adjusting the height of the jig * Try to be 90 ° to the machine bet. * It does not tilt more than 30 degrees.
    Set Contents  Single item, 12M-JN, LP-12  Specification  Clamping jig  Wrench Size (mm)  [Hex wrench hole] 6  Trusco Part No.  828-9756  Width Across Flats (mm)  19  Thread Size  M12  Mass (g)  220  Height (mm)  100 
    from S$27.99
    Min. 32 days
  37. Dyca Store Juster
    Geo. Prince Takeshita Dyca Store Juster
    Fire extinguisher box, scientific equipment, test equipment, dust box
    Rating:
    100%
    from S$2.99
    Min. 7 days
  38. Adjusting bolt with hole
    Iwata Mfg. Adjusting bolt with hole
    A leveling system that supports the level adjustment of heavy-duty machines from your feet. A type with holes for passing anchor bolts, etc. The B type has a narrow width across flats and can be turned with a small spanner. The box wrench will not slip off.
    Dimension N (mm)  100  Dimension G (mm)  13  Dimension K (mm)  Dimension L (mm)  80  Screws  Fine 
    from S$16.99
    Min. 4 days
  39. Bolt with swivel pad Bolt size 18 mm
    NEW STRONG Bolt with swivel pad Bolt size 18 mm
    It is a receiving bolt of the clamp. It can be used even if the clamp is slightly tilted. It can also be used on the T-groove. For adjusting the height of the jig * Try to be 90 ° to the machine bet. * It does not tilt more than 30 degrees.
    Set Contents  Single item, 18M-JN, LP-18  Width Across Flats (mm)  27  Wrench Size (mm)  [Hex wrench hole] 8  Height (mm)  130  Specification  Clamping jig  Mass (g)  540  Trusco Part No.  828-9759  Thread Size  M18 
    from S$69.99
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 179

Set Ascending Direction