All Category

Standard

View : Grid List
Filter

Items 1 - 40 of 90

Set Ascending Direction
  1. Set Collar Standard
    MonotaRO Set Collar Standard
    This is convenient when you want to adjust the position. * Do not use for anything other than its intended purpose.
    Surface Treatment  Black dyed  Material  S45C  Type  Standard 
    Rating:
    95%
    from S$1.39
    Min. 2 days
  2. Standard Set Collar Black Dyed
    Iwata Mfg. Standard Set Collar Black Dyed
    This is convenient when you want to adjust the position at present or when it is difficult to machine a snap ring groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing.
    Surface Treatment  Black dyeing (alkali coloring finish)  Material  S45C  Chamfer Diameter D1 (Φmm) 
    Rating:
    94%
    from S$1.39
    Min. 2 days
  3. Standard Shaft Collar Type
    KANA (KATAYAMA CHAIN) Standard Shaft Collar Type
    Ideal for positioning idler sprockets and fixing bearing housings and shafts.
    Surface Treatment  Black dyed  Material  SS400 
    Rating:
    96%
    from S$2.49
    Min. 2 days
  4. Standard Set Collar SUS304
    Iwata Mfg. Standard Set Collar SUS304
    This is convenient when you want to adjust the position at present or when it is difficult to machine a snap ring groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing.
    Material  SUS304 
    Rating:
    80%
    from S$3.49
    Min. 2 days
  5. Standard Set Collar Aluminum (A2017)
    Iwata Mfg. Standard Set Collar Aluminum (A2017)
    Material / Processing  Aluminum (A2017)  Type  Standard 
    Rating:
    96%
    from S$2.19
    Min. 2 days
  6. Set color stainless steel SUS
    KONISHI MFG (MIYOSHI) Set color stainless steel SUS
    RoHS Directive  10 substances  Type  Standard 
    Rating:
    100%
    from S$3.89
    Min. 2 days
  7. Stainless Steel Shaft Collar Standard Type
    KANA (KATAYAMA CHAIN) Stainless Steel Shaft Collar Standard Type
    Ideal for positioning idler sprockets and fixing bearing housings and shafts.
    Surface Treatment  Included Accessories  2 set screws  Material  SUS304  Type  Standard 
    Rating:
    91%
    from S$4.89
    Min. 2 days
  8. set color
    Everon set color
    Easy to install. For fixing bearings, sprockets, etc.
    Type  Standard  Surface Treatment  Zinc plating 
    Rating:
    100%
    from S$2.99
    Min. 2 days
  9. Standard set color Electroless nickel plating
    Iwata Mfg. Standard set color Electroless nickel plating
    A set collar that holds and fixes the shaft with a set screw. It can be used for simple positioning, etc., and is the most compact type in the series.
    Surface Treatment  Electroless nickel plating  Material  Iron (S45C)  Type  Standard 
    Rating:
    40%
    from S$2.99
    Min. 2 days
  10. Set collar 2 hole type
    Iwata Mfg. Set collar 2 hole type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Type  Standard 
    Rating:
    100%
    from S$3.89
    Min. 2 days
  11. Standard set collar For bearing fixing Black dyed
    Iwata Mfg. Standard set collar For bearing fixing Black dyed
    A general-purpose type that can be attached with a set screw. A set collar that holds the shaft with a set screw to fix it. It is the most compact type that can be used for simple positioning. For fixing bearings
    Surface Treatment  Black dyed  Material  Iron (S45C)  Type  Standard 
    Rating:
    100%
    from S$3.99
    Min. 2 days
  12. Set Collar 4 Hole Type
    Iwata Mfg. Set Collar 4 Hole Type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Rating:
    93%
    from S$4.59
    Min. 2 days
  13. SUS304 for standard set collar bearing fixing
    Iwata Mfg. SUS304 for standard set collar bearing fixing
    A general-purpose type that can be attached with a set screw. A set collar that holds the shaft with a set screw to fix it. It is the most compact type that can be used for simple positioning. For fixing bearings
    Material  Stainless steel (SUS304)  Type  Standard 
    from S$6.49
    Min. 2 days
  14. Standard set color resin (POM)
    Iwata Mfg. Standard set color resin (POM)
    Chamfer Diameter D1 (Φmm)  Material / Processing  Resin (POM)  Type  Standard 
    Rating:
    100%
    from S$2.49
    Min. 2 days
  15. Set color SC
    KONISHI MFG (MIYOSHI) Set color SC
    RoHS Directive  10 substances  Type  Standard 
    from S$1.99
    Min. 4 days
  16. Set collar Bearing fixing type (long)
    Iwata Mfg. Set collar Bearing fixing type (long)
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Hold and fix the inner ring of the bearing. A long type with a long boss.
    Type  Standard 
    Rating:
    100%
    from S$5.59
    Min. 4 days
  17. Set color Keyway / 4-hole type
    Iwata Mfg. Set color Keyway / 4-hole type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. It can be used for fixing sprockets and pulleys with keys. * It is designed to be larger than the JIS standard to prevent interference with the keys.
    Material / Processing  Iron (S45C) / Black dyed  Type  Standard 
    from S$7.49
    Min. 2 days
  18. Urethane damper normal type
    Iwata Mfg. Urethane damper normal type
    Hardness  Shore A90 (damper) 
    Rating:
    100%
    from S$0.96
    Min. 4 days
  19. Set color Key groove type
    Iwata Mfg. Set color Key groove type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. It can be used for fixing sprockets and pulleys with keys. * It is designed to be larger than the JIS standard to prevent interference with the keys.
    Type  Standard 
    from S$6.89
    Min. 4 days
  20. Standard set collar For bearing fixing Electroless nickel plating
    Iwata Mfg. Standard set collar For bearing fixing Electroless nickel plating
    A general-purpose type that can be attached with a set screw. A set collar that holds the shaft with a set screw to fix it. It is the most compact type that can be used for simple positioning. For fixing bearings
    Surface Treatment  Electroless nickel plating  Material  Iron (S45C)  Type  Standard 
    from S$4.59
    Min. 4 days
  21. Set color D cut screw type
    Iwata Mfg. Set color D cut screw type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Various parts such as brackets can be attached using the D-cut surface.
    Type  Standard 
    Rating:
    100%
    from S$7.79
    Min. 4 days
  22. NSC set color
    NBK (Nabeya Bi-tech Kaisha) NSC set color
    Type  Standard 
    from S$2.19
    Min. 4 days
  23. Set color inch SUS304
    Iwata Mfg. Set color inch SUS304
    RoHS Directive  10 substances  Applicable Standard  RoHS2  Material  SUS304 
    Rating:
    100%
    from S$5.39
    Min. 4 days
  24. Set color inch black dyed
    Iwata Mfg. Set color inch black dyed
    RoHS Directive  10 substances  Applicable Standard  RoHS2  Material  S45C / Black dyed 
    Rating:
    100%
    from S$2.79
    Min. 4 days
  25. 25x15mm steel set collar
    ESCO 25x15mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Outer Diameter (Φmm)  38  Width (mm)  15  Inner Diameter (Φmm)  25  Screws  M8 x 8 (Tame screw)  Esco Part No.  EA966C-27  Size (mm)  25×38×15  Type  Standard 
    from S$7.89
    Min. 4 days
  26. Stainless set color
    KSM (Minamiguchi Bearing Mfg.) Stainless set color
    It has strong corrosion resistance and is ideal for food and chemical machinery.
    Material  SUS303 (SUS304 is used for set screw)  Type  Stainless set color 
    from S$4.39
    Min. 6 days
  27. 16x12mm steel set collar
    ESCO 16x12mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Inner Diameter (Φmm)  16  Screws  M5 × 6 (Tame screw)  Size (mm)  16×28×12  Outer Diameter (Φmm)  28  Type  Standard  Width (mm)  12  Esco Part No.  EA966C-20 
    from S$5.29
    Min. 4 days
  28. 13x 8mm steel set collar
    ESCO 13x 8mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Esco Part No.  EA966C-14  Width (mm)  Outer Diameter (Φmm)  22  Inner Diameter (Φmm)  13  Screws  M5 × 6 (Tame screw)  Size (mm)  13×22×8  Type  Standard 
    from S$4.29
    Min. 4 days
  29. Standard set color
    KSM (Minamiguchi Bearing Mfg.) Standard set color
    Type  Standard set color 
    from S$3.89
    Min. 5 days
  30. NSCS-P set color
    NBK (Nabeya Bi-tech Kaisha) NSCS-P set color
    from S$15.99
    Min. 4 days
  31. NSCSS set color
    NBK (Nabeya Bi-tech Kaisha) NSCSS set color
    Type  Split 
    from S$15.99
    Min. 4 days
  32. 12x10mm steel set collar
    ESCO 12x10mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Screws  M4 x 4 (Tame screw)  Outer Diameter (Φmm)  26  Inner Diameter (Φmm)  12  Type  Standard  Esco Part No.  EA966C-13  Size (mm)  12×26×10  Width (mm)  10 
    from S$3.99
    Min. 4 days
  33. Standard set color Chromate plating
    Iwata Mfg. Standard set color Chromate plating
    Material / Processing  Iron (S45C) / chromate plating white  Type  Standard 
    from S$2.49
    Min. 4 days
  34. NSCS set color
    NBK (Nabeya Bi-tech Kaisha) NSCS set color
    from S$9.29
    Min. 4 days
  35. 18x15mm steel set collar
    ESCO 18x15mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Size (mm)  18×32×15  Esco Part No.  EA966C-23  Outer Diameter (Φmm)  32  Inner Diameter (Φmm)  18  Width (mm)  15  Type  Standard  Screws  M6 x 6 (tapped screw) 
    from S$5.99
    Min. 4 days
  36. 20x32x15mm set color (SUS304)
    ESCO 20x32x15mm set color (SUS304)
    RoHS Directive  10 substances  Width (mm)  15  Inner Diameter (Φmm)  20  Outer Diameter (Φmm)  32  Esco Part No.  EA966CA-50  Specification  General-purpose type  Material  Stainless steel (SUS304) 
    from S$11.99
    Min. 6 days
  37. Set collar 3 hole type
    Iwata Mfg. Set collar 3 hole type
    A set collar that holds the shaft with a set screw to fix it. It can be used for simple positioning and is the most compact type in the series. Convenient for attaching brackets and plates and fixing sprockets.
    Material / Processing  Iron (S45C) / Black dyed  Type  Standard 
    from S$4.89
    Min. 4 days
  38. 8x 8mm steel set collar
    ESCO 8x 8mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Esco Part No.  EA966C-8  Size (mm)  8×16×8  Inner Diameter (Φmm)  Screws  M4 x 4 (Tame screw)  Outer Diameter (Φmm)  16  Width (mm)  Type  Standard 
    from S$3.49
    Min. 4 days
  39. 15x12mm steel set collar
    ESCO 15x12mm steel set collar
    This is convenient when you want to adjust the position on site or when it is difficult to make a groove on the shaft. One side is chamfered by 30 ° to avoid interference with the outer ring of the bearing. The chamfer on the opposite side is C0.5 to 1.5, making it easy to use for positioning spr... Read More
    Esco Part No.  EA966C-18  Width (mm)  12  Size (mm)  15×28×12  Inner Diameter (Φmm)  15  Type  Standard  Screws  M5 × 6 (Tame screw)  Outer Diameter (Φmm)  28 
    from S$4.99
    Min. 4 days
  40. NSC-P set color
    NBK (Nabeya Bi-tech Kaisha) NSC-P set color
    from S$5.19
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 90

Set Ascending Direction